journal article·2015-03

Machinability and scratch wear resistance of carbon-coated WC inserts

B. Pazhanivel, T. Prem Kumar, G. Sozhan

Publisher page

Abstract

Abstract In this work, cemented tungsten carbide (WC) inserts were coated with nanocarbons/carbides by chemical vapor deposition (CVD) and their machinability and scratch wear resistance were investigated. The hardness and surface conditions of the WC substrate were studied before and after coating. The CVD-generated nanocarbons on the insert surfaces were examined by SEM, FE-SEM and TEM. The electron microscopic images revealed that the carbons generated were multi-walled carbon nanotubes (MWCNTs) or carbides depending on the experimental conditions. In both the cases, the cutting edges of the inserts had dense deposits. Scratch wear test with the coated inserts showed that the co-efficient of friction was 0.1 μ as against 0.2 μ for the uncoated inserts under a ramp load of 1–13 N. The machinability characteristics of commercially available TiCN-coated inserts and the carbon-coated WC inserts were compared by using a CNC machine and a Rapid I vision inspection system. It was found that the carbide-coated inserts exhibited machinability with better surface finish comparable to that of the TiCN-coated inserts while the MWCNT-coated inserts showed inferior adhesion properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Yasuoka · Surf. Coat. Technol. · 2012 · 206 · 216810.1016/j.surfcoat.2011.09.053 ↗
2. G. Vega, H. Arturo, Graduate Thesis. http://scholarcommons.usf.edu/etd/3121.
3. Jiang · J. Phys. D · 2010 · 43 · 32520210.1088/0022-3727/43/32/325202 ↗
4. Strnad · Sci. Bull. Univ. Targu Mures · 2010 · 7 · 1841
5. de Lacalle · 2011 · 33
6. Moreno · J. Braz. Soc. Mech. Sci. Eng. · 2010 · 32 · 11410.1590/S1678-58782010000200003 ↗
7. Datsyuk · Carbon · 2008 · 46 · 83310.1016/j.carbon.2008.02.012 ↗
8. Inspektor · Int. J. Refract. Metal. Hard Mater. · 1997 · 15 · 4910.1016/S0263-4368(96)00045-5 ↗
9. Hirata · Tribol. Int. · 2004 · 37 · 89310.1016/j.triboint.2004.07.005 ↗
10. Jawaid · Tribol. Trans. · 2000 · 43 · 32510.1080/10402000008982347 ↗
11. Sun · Diam. Relat. Mater. · 2003 · 12 · 71110.1016/S0925-9635(02)00345-X ↗
12. Kim · LLE Rev. · 1985 · 22 · 85
13. Mangione · Radiat. Effects Defects Solids · 2010 · 165 · 74610.1080/10420151003731652 ↗
14. Umeda · Trans. Join. Weld. Res. Inst. · 2012 · 41 · 49
15. Shunmugesh · Res. J. Eng. Sci. · 2014 · 3 · 110.4103/2320-0057.143655 ↗
16. Lim · 1999