journal article·2021-01Open access

The effects of mechanical alloying on the physical and thermal properties of CuCrFeTiV alloy

F. Antão, M. Dias, J.B. Correia, A. Galatanu, M. Galatanu, U.V. Mardolcar, A. Myakush, M.M. Cruz, A. Casaca, R.C da Silva, E. Alves

Abstract

Abstract The present work reports the production and key properties of the CuCrFeTiV high entropy alloy synthetized by mechanical alloying and spark plasma sintering. The milled powders and the as-sintered samples were analysed through scanning electron microscopy, coupled with energy dispersive X-ray spectroscopy and particle induced X-ray emission. Magnetic properties together with electrical resistivity, thermal conductivity, specific heat and differential thermal analysis were also evaluated on the consolidated samples. The powders reveal an increasing content in iron as the millings are prolonged up to 20 h. The elemental composition of the sintered alloy, determined through particle induced X-ray emission, confirms the final composition after mechanical alloying with an increase of iron and a decrease in the remaining elements. Furthermore, although the alloy presents an electrical resistivity typical of a high entropy alloy, a ferromagnetic behaviour was found, consistently with a major Fe content as detected in prior observations. Finally, thermal measurements show that this CuCrFeTiV high entropy alloy possesses thermal properties suitable for its potential use as thermal barriers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Murty · 2019
2. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
3. Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl ^ s10.1007/s11661-004-0254-x ↗
4. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating10.1002/adem.200300507 ↗
5. Physical properties of high entropy alloys10.3390/e15125338 ↗
6. Near-constant resistivity in 4.2-360 K in a B2 Al 2.08 CoCrFeNi10.1063/1.3679072 ↗
7. Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys10.1016/j.mseb.2009.05.024 ↗
8. High entropy alloy thin films of AlCoCrCu0.5FeNi with controlled microstructure10.1016/j.apsusc.2019.143560 ↗
9. Sintering and irradiation of copper-based high entropy alloys for nuclear fusion
10. Guelph PIXE software package III: alternative proton database10.1016/S0168-583X(00)00156-7 ↗
11. Geometrical correction factor for semiconductor resistivity measurements by four-point probe method10.1143/JJAP.23.1499 ↗
12. High-entropy alloys by mechanical alloying: A review10.1557/jmr.2019.37 ↗
13. Deviations from Matthiessen's Rule10.1080/00018737200101308 ↗
14. Recent progress in high-entropy alloys10.3166/acsm.31.633-648 ↗
15. Electron transport studies in Ni-rich γ-NiFeCr alloys10.1016/S0304-8853(98)00053-5 ↗
16. High-entropy alloys with high saturation magnetization, electrical resistivity and malleability
17. Electrical, magnetic, and Hall properties of Al x CoCrFeNi high-entropy alloys10.1016/j.jallcom.2010.10.210 ↗
18. Uncovering electron scattering mechanisms in NiFeCoCrMn derived concentrated solid solution and high entropy alloys10.1038/s41524-018-0138-z ↗
19. Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering10.1016/j.intermet.2014.08.008 ↗
20. Enhancing the DEMO divertor target by interlayer engineering10.1016/j.fusengdes.2015.03.031 ↗
21. Investigation of the effect of composing elements of CuNiCoFeV high entropy alloy on thermal-elastic properties: An ab initio study10.1016/j.intermet.2018.10.019 ↗
22. G. Cios et al., The Investigation of Strain-Induced Martensite Reverse Transformation in AISI 304 Austenitic Stainless Steel.