Inserting an intermediate band in Cu- and Ag-based Kesterite compounds by Sb doping: A first-principles study
Source abstract
Abstract
Abstract Intermediate band solar cells(IBSCs) have attracted much attention owing to the ideal three-photon absorption by one absorber. Here, we have investigated Sb-doped Cu2ZnSnS4(CZTS), Cu2ZnGeS4(CZGS), Ag2ZnSnS4(AZTS) and Ag2ZnGeS4(AZGS) as the absorber for IBSCs by first-principles calculation. After doping Sb at Sn or Ge site, an isolated and half-filled intermediate band has been inserted in the main band gaps of all of the four Kesterite compounds, which mainly consists of Sb-s and S-p states. The absorption coefficients of the doped samples are greatly enhanced in visible light region and can cover the solar radiation spectrum effectively owing to the three-photon absorption with the help of intermediate band. Based on the calculation on defect formation energy, we have found the suitable chemical potential condition and gotten the minimums of defect formation energies for Sb doping at Sn or Ge site. Finally, Sb-doped AZTS as the promising absorber candidate for IBSCs has been proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Research opportunities to advance solar energy utilization10.1126/science.aad1920 ↗
2. The path towards sustainable energy10.1038/nmat4834 ↗
3. Effects of heavy alkali elements in Cu (In, Ga) Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
4. Fabrication and electronic properties of CZTSe single crystals10.1109/JPHOTOV.2014.2363552 ↗
5. Facile synthesis of single crystalline sub-micron Cu2ZnSnS4 (CZTS) powders using solvothermal treatment10.1039/C4RA12815J ↗
6. In-situ and green method to prepare Pt-free Cu2ZnSnS4 (CZTS) counter electrodes for efficient and low cost dye-sensitized solar cells10.1021/acssuschemeng.5b00585 ↗
7. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
8. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
9. Improving performance and moisture stability of perovskite solar cells through interface engineering with polymer-2D MoS2 nanohybrid10.1016/j.solener.2019.09.055 ↗
10. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
11. Increasing the efficiency of ideal solar cells by photon induced transitions at intermediate levels10.1103/PhysRevLett.78.5014 ↗
12. Thermodynamic efficiency of an intermediate band photovoltaic cell with low threshold Auger generation10.1063/1.2010622 ↗
13. Intermediate-band photovoltaic solar cell based on ZnTe: O
14. Organic conjugated polymer-based functional nanohybrids
15. Novel anisotropic ordered polymeric materials based on metallopolymer precursors as dye sensitized solar cells10.1016/j.cej.2018.10.090 ↗
16. Synthesis of SnSe quantum dots by successive ionic layer adsorption and reaction (SILAR) method for efficient solar cells applications10.1016/j.solener.2020.02.050 ↗
17. Functionalized metal oxide nanoparticles for efficient dye-sensitized solar cells (DSSCs): a review
18. Self-organized InGaAs/GaAs quantum dot arrays for use in high-efficiency intermediate-band solar cells
19. Emitter degradation in quantum dot intermediate band solar cells10.1063/1.2747195 ↗
20. Strain-compensated InAs/GaNAs quantum dots for use in high-efficiency solar cells10.1063/1.2973398 ↗
21. Extremely long carrier lifetime over 200 ns in GaAs wall-inserted type II InAs quantum dots10.1063/1.3694284 ↗
22. Carrier dynamics of type-II InAs∕GaAs quantum dots covered by a thin GaAs1−xSbx layer10.1063/1.2964191 ↗
23. Electronic structure of ZnTe: O and its usability for intermediate band solar cell
24. Photocurrent induced by two-photon excitation in ZnTeO intermediate band solar cells10.1063/1.4790643 ↗
25. GaNAsP: An intermediate band semiconductor grown by gas-source molecular beam epitaxy10.1063/1.4795782 ↗
26. Photogenerated current by two-step photon excitation in ZnTeO intermediate band solar cells with n-ZnO window layer10.1109/JPHOTOV.2013.2282738 ↗
27. Nitrogen doped Cu2O: A possible material for intermediate band solar cells10.1016/j.solmat.2012.06.017 ↗
28. Analysis of the electronic structure of modified CuGaS2 with selected substitutional impurities: prospects for intermediate-band thin-film solar cells based on Cu-containing chalcopyrites10.1021/jp909895q ↗
29. Transition metals doped CuAlSe2 for promising intermediate band materials
30. Group-IV (Si, Ge, and Sn)-doped AgAlTe2 for intermediate band solar cell from first-principles study10.1088/1361-6641/aa67d7 ↗
31. Investigation of a novel intermediate band photovoltaic material with wide spectrum solar absorption based on Ti-substituted CuGaS210.1016/j.solener.2014.02.046 ↗
32. Cr incorporation in CuGaS2 chalcopyrite: A new intermediate-band photovoltaic material with wide-spectrum solar absorption10.1002/pssa.201228721 ↗
33. Investigation of the sub-bandgap Photoresponse in CuGaS2: Fe for intermediate band solar cells10.1002/pip.1197 ↗
34. Observation of an intermediate band in Sn-doped chalcopyrites with wide-spectrum solar response10.1038/srep01286 ↗
35. Electrical and optical properties of Cu2ZnSnS4 thin lmsprepared by RF magnetron sputtering process10.1016/S0927-0248(02)00127-7 ↗
36. Towards sustainable materials for solar energy conversion: preparation and photoelectrochemical characterization of Cu2ZnSnS410.1016/j.elecom.2008.02.008 ↗
37. The role of Sb in solar cell material Cu2ZnSnS4
38. Antimony doping in solution-processed Cu2ZnSn(S, Se)4 solar cells10.1002/cssc.201500433 ↗
39. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
40. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
41. Energy band gaps and lattice parameters evaluated with the Heyd-Scuseria-Ernzerhof screened hybrid functional10.1063/1.2085170 ↗
42. Crystal and electronic band structure of Cu2ZnSnX4 (X=S and Se) photovoltaic absorbers: First-principles insights
43. Compositionally tunable Cu2ZnSn(S1-xSex)4 nanocrystals: probing the effect of Se-inclusion in mixed chalcogenide thin films10.1021/ja2058692 ↗
44. Studies of compositional dependent Cu2Zn(GexSn1-x)S4 thin films prepared by sulfurizing sputtered metallic precursors10.1016/j.jallcom.2014.09.097 ↗
45. Crystallographic and optical properties of (Cu, Ag)2ZSnS4 and (Cu, Ag)2ZnSnSe4 solid solutions10.1002/pssc.201400343 ↗
46. The Ag2S–ZnS–GeS2 system: Phase diagram, glass-formation region and crystal structure of Ag2ZnGeS410.1016/j.jallcom.2010.03.198 ↗
47. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
48. Electronic properties of energy harvesting Cu-chalcogenides: p-d hybridization and d-electron localization10.1016/j.commatsci.2015.05.028 ↗
49. Local-density-functional calculations of the energy of atoms10.1103/PhysRevA.55.191 ↗
50. Electronic and optical properties of Cu2ZnSnS4 and Cu2ZnSnSe410.1063/1.3318468 ↗
51. Computational modeling of novel bulk materials for the intermediate-band solar cells10.1021/acsomega.6b00534 ↗
52. Design of narrow-gap TiO2: a passivated codoping approach for enhanced photo electrochemical activity10.1103/PhysRevLett.102.036402 ↗
53. Solar cell with an intermediate band of finite width10.1103/PhysRevB.78.165122 ↗
54. S.E. Jenks, Doctoral Thesis, Drexel University, 2012.
55. General rules of the sub-band gaps in group-IV (Si, Ge, and Sn)-doped I-III-VI2-type chalcopyrite compounds for intermediate band solar cell: A first-principles study10.1016/j.mseb.2018.11.006 ↗
56. Photocatalyst AgInS2 for active overall water-splitting: A first-principles study10.1016/j.cplett.2013.11.042 ↗
57. Investigation on AgGaSe2 for water splitting from first-principles calculations10.1209/0295-5075/105/37007 ↗
58. Correcting density functional theory for accurate predictions of compound enthalpies of formation: Fitted elemental-phase reference energies10.1103/PhysRevB.85.115104 ↗
59. Intrinsic n-type versus p-type doping asymmetry and the defect physics of ZnO
60. Investigation of single phase Cu2ZnSnxSb1−xS4 compounds processed by mechanochemical synthesis
61. Engineering solar cell absorbers by exploring the band alignment and defect disparity: the case of Cu- and Ag-based kesterite compounds10.1002/adfm.201502272 ↗
62. Oxygen-induced ordering in bulk polycrystalline Cu2ZnSnS4 by Sn Removal10.1021/acs.inorgchem.7b01777 ↗