Revealing of ultrasonic wire bonding mechanisms via metal-glass bonding
Source abstract
Abstract
Abstract Very complex phenomena and interface changes occur during the ultrasonic wire bonding process, which lead to an incomplete understanding of the process, especially for the friction and softening phases. In this work, the bonding process was real-time observed via metal-glass bonding to achieve a deeper understanding of these phenomena. Through the 2D high-speed observation, the emergence and changes of five areas including the contact area, friction area, stick area, microwelds area and oxides area were observed and quantified. The stick and microwelds area were observed to start from the central region and extend outwards. Normal force and ultrasonic power interactively influence these areas. The moving of oxides was captured and confirmed to be caused by both the material flow and vibration. The ultimate shear stress of microwelds was calculated to be 95.72 MPa with which the quantification of the observed microwelds area can be used to predict the bonding strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Harman · 2010
2. A review on the mechanisms of ultrasonic wedge-wedge bonding10.1016/j.jmatprotec.2017.02.012 ↗
3. Predicting the shear strength of a wire bond using laser vibration measurements10.1109/ESTC.2006.280091 ↗
4. Data-driven modeling of the ultrasonic softening effect for robust copper wire bonding
5. Experimental and numerical simulation study of pre-deformed heavy copper wire wedge bonds10.4071/isom-TP44 ↗
6. In situ ultrasonic stress measurements during ball bonding using integrated piezoresistive microsensors
7. The ultrasonic wedge/wedge bonding process investigated using in situ real-time amplitudes from laser vibrometer and integrated force sensor10.1016/j.mee.2009.08.031 ↗
8. Modeling of the stick-slip effect in heavy copper wire bonding to determine and reduce tool wear
9. Analysis of the friction processes in ultrasonic wedge/wedge-bonding10.1007/s00542-009-0811-8 ↗
10. Real-time observation of interface relative motion during ultrasonic wedge-wedge bonding process10.4071/isom-2015-WP35 ↗
11. Quantification of the energy flows during ultrasonic wire bonding under different process parameters
12. Investigations on the oxide removal mechanism during ultrasonic wedge-wedge bonding process
13. A deeper understanding on the motion behaviors of wire during ultrasonic wedge-wedge bonding process10.4071/isom-2016-THA31 ↗
14. A footprint study of bond initiation in gold wire crescent bonding10.1109/TCAPT.2005.848585 ↗
15. Footprint study of ultrasonic wedge-bonding with aluminum wire on copper substrate10.1007/BF02690530 ↗
16. Real time contactresistance measurement to determine when microwelds start to form duringultrasonic wire bonding10.1016/j.mee.2012.12.003 ↗
17. Observation of ultrasonic Al-Si wire wedge bond interface using high resolution transmission electron microscope
18. Nano features of Al/Au ultrasonic bond interface observed by high resolution transmission electron microscopy10.1016/j.matchar.2008.01.001 ↗
19. Interface formation in the US-wedge/wedge-bond process of AlSi1/CuNiAu contacts10.1007/s11664-010-1439-2 ↗
20. Deformation behavior of thick aluminum wire during ultrasonic bonding10.2320/matertrans.MD201210 ↗
21. Deformation and bond-area expansion of thick aluminum wire during ultrasonic bonding
22. Model-based feedback control of an ultrasonic transducer for ultrasonic assisted turning using a novel digital controller10.1016/j.phpro.2015.08.043 ↗
23. Self-cleaning mechanisms in ultrasonic bonding of Al wire10.1016/j.jmatprotec.2018.03.016 ↗
24. Plastizitätsuntersuchungen von metallkristallen in ultraschallfeld10.1016/0001-6160(59)90114-2 ↗
25. Effects of ultrasound on deformation characteristics of metals10.1109/T-SU.1966.29367 ↗
26. Relation between vibration of wedge-tool and adhesion of wire to substrate during ultrasonic bonding10.2207/qjjws.27.200s ↗
27. Molecular dynamics simulation of microwelds formation and breakage during ultrasonic copper wire bonding
28. The reaction between silica and aluminum10.1149/1.2401831 ↗
29. Application of microwave heating to reaction between soda-lime glass and liquid al for fabrication of composite materials10.2320/matertrans.MRA2008461 ↗