journal article·2002-09

Study on the photoelectrochemical etching process of semiconducting 6H–SiC wafer

Moo Whan Shin, Jung Gyun Song

Publisher page

Abstract

Several dry etching methods which are commonly used for the fabrication of SiC devices are known to result in ion-induced damage on the etched surface, which is highly undesirable for the high frequency and high power device operation. In this paper we report on photoelectrochemical etching process of semiconducting 6H–SiC wafer. The etching process consists of illumination of UV in HF-based electrolyte, thermal oxidation, and HF dipping. An etching rate of 760 A min−1 was obtained using a dilute HF(1.4 wt.% in H2O) electrolyte with the etching potential of 3.5 V. The etching rate was found out to increase with the bias voltage. Double-step oxidation process was found out to be useful for the decrease of the surface roughness. It was shown that the addition of H2O2 into the HF solution improves the etching rate of the SiC surface. The PEC etching resulted in a highly anisotropic etching characteristics and shown to have a potential for the fabrication of SiC devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Semiconductor materials and devices · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. Weitzel · IEEE Trans. Electron Dev. · 1996 · 41 · 173210.1109/16.536819 ↗
2. Shor · Appl. Phy. Lett. · 1992 · 60 · 100110.1063/1.106502 ↗
3. Lauermann · J. Electrochem. Soc. · 1997 · 144 · 7310.1149/1.1837367 ↗
4. van de Lagemaat · J. Appl. Phys. · 1998 · 83 · 608910.1063/1.367479 ↗
5. Shor · J. Electrochem. Soc. · 1994 · 141 · 77810.1149/1.2054810 ↗
6. D.M. Collins, G.L. Harris, D. Zhang K. Wongchotigul, Inst. Phys. Conf. Ser. No 142: Chapter 3 (1998) 617.
7. Shor · J. Electrochem. Soc. · 1992 · 139 · 121310.1149/1.2069369 ↗