journal article·2019-04

Columnar grain growth during annealing prior to cold rolling of non-oriented electrical steels

E.J. Gutiérrez Castañeda, C.N. Palafox Cantú, A.A. Torres Castillo, A. Salinas Rodríguez, R. Deaquino Lara, F. Botello Rionda, F. Márquez Torres, S. García Guillermo

Publisher page

Abstract

Abstract The present research reports the microstructural factors that favor the development of columnar grains during annealing prior to cold rolling (APCR). Results show that decarburization of steel has a strong effect on phase transformations, grain structure and crystallographic texture. Annealing at 850 °C (two-phase field) promotes the development of columnar-grained microstructures with orientations close to the ideal cube texture. Higher annealing temperatures within the intercritical region, results in a mixture of columnar + equiaxial grains (875 °C) or completely equiaxial-grained microstructures (900 °C). Annealing at temperatures within the single ferrite (700 °C, 750 °C) or austenite (950 °C, 1050 °C) phase fields does not promote the development of columnar grains. In these cases, annealing promotes the development of equiaxial grains with rotated cube texture and orientations along the γ-fibre. Changes in texture produced by APCR are consistent with the Bain and Kurdjumov-Sachs correspondence relationships and occur according to oriented nucleation and selective growth mechanisms depending on the characteristics of decarburization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Influence of thickness and chemical composition of hot-rolled bands on the final microstructure and magnetic properties of non-oriented electrical steel sheets subjected to two different decarburizing atmospheres
2. Energy efficient electrical steels: magnetic performance prediction and optimization10.1016/j.scriptamat.2012.02.027 ↗
3. Magnetic material optimization for hybrid vehicle PMSM drive
4. Low silicon non-grain-oriented electrical steel: linking magnetic properties with metallurgical factors10.1016/j.jmmm.2006.11.217 ↗
5. Philip · 2002
6. Correlation between the magnetic properties and the crystallographic texture during the processing of non-oriented electrical steel10.4028/www.scientific.net/SSP.160.189 ↗
7. Darja S., 2010. Non-oriented electrical steel sheets. MTAEC9. 44, pp. 317–325.
8. Columnar grain growth in non-oriented electrical steel10.1016/S0304-8853(03)00628-0 ↗
9. Secondary recrystallization in non-oriented electrical steels
10. Columnar grain growth with enhanced rotation texture in temper rolled NO silicon steels10.4028/www.scientific.net/MSF.782.201 ↗
11. Cube-textured Si-steel sheets by oxide-separator-induced decarburization and growth mechanism of cube grains10.1016/S0304-8853(02)00810-7 ↗
12. Strain-induced grain growth in non-oriented electrical steels10.1016/j.jmmm.2008.04.020 ↗
13. Effect of annealinf prior to cold rolling on magnetic and mechanical properties of low carbon non-oriented electrical steels10.1016/j.jmmm.2011.05.039 ↗
14. High temperature oxidation and its effects on microstructural changes of hot-rolled low carbon non-oriented electrical steels during air annealing10.1007/s11085-014-9518-z ↗
15. Krzyzanowski · 2010
16. In situ study of austenite formation by dilatometry in a low carbon microalloyed steel10.1016/j.scriptamat.2008.01.019 ↗
17. The kinetics of formation and decomposition of austenite in relation to carbide morphology10.1007/s11661-016-3874-z ↗
18. Kinetics of columnar abnormal grain growth in low-Si non-oriented electrical steels10.1016/j.msea.2004.07.046 ↗
19. Bunge · 2013
20. Engler · 2009
21. H. Arunansu, S. Satyam, B. Debashish, Microstructure and Texture in Steels and Other Materials, 2009 Jamshedpur, India.
22. Humphreys · 2004
23. F. Haessner, 1978. Recrystallization of Metallic Materials, Stuttgart, Germany.
24. Modelling of kinetics and dilatometric behavior of austenite formation in a low-carbon steel with a ferrite plus pearlite initial microstructure10.1023/A:1016579510723 ↗
25. A.W. Ronald, W.W. Harry, 1998. Proceedings of the 18th conference: Heat treating including the Liu Dai Memorial Symposium, ASM, Heat Treating Society, 12–1.
26. Decarburization and grain growth kinetics during the annealing of electrical steels10.1016/1359-6462(96)00309-0 ↗
27. Khanna · 2002
28. Review of the high-temperature oxidation of iron and carbon steels in air or oxygen10.1023/A:1023685905159 ↗
29. Orientation selective recrystallization on nonoriented electrical steels10.1007/BF02651889 ↗
30. Transformation textures in steels10.2355/isijinternational.34.927 ↗
31. Texture optimization for intermediate Si-containing non-oriented electrical steel10.1007/s11665-014-1201-7 ↗
32. Texture control during manufacturing of nonoriented electrical steels10.1155/2008/173083 ↗
33. Beckley · 2002