journal article·2000-07

Effect of oxygen on residual stress and structural properties of tungsten nitride films grown by reactive magnetron sputtering

Y.G Shen, Y.W Mai

Publisher page

Abstract

Abstract Thin films of W–O–N were produced by reactive d.c. magnetron sputtering of tungsten in an Ar–N 2 –O 2 gas mixture. The effects of oxygen incorporation on the residual stress and structural properties of these films as well as the influence of post-deposition annealing have been studied. The films were analyzed in situ by a cantilever beam technique, and ex situ by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and electron energy-loss spectroscopy (EELS). It was found that the stoichiometric W 2 N films deposited under oxygen-free conditions had a high compressive stress of 1.45 GPa. The compressive stress in W–O–N films decreased significantly with an increase in the oxygen concentration and became slightly tensile for films near 10–15 at.% oxygen. These results can be ascribed to the decrease in the lattice parameter caused by incorporating small oxygen atoms in the lattice sites and the development of an amorphous network in the W–O–N films as the incorporation of oxygen was increased. By high temperature annealing the structural conversion from W 2 N to W in oxygen-free films was observed using XRD and the microstructure evolution after conversion was demonstrated using cross-sectional TEM. The effect of oxygen in stabilizing the W 2 N structure was also elucidated and explained on the basis of structural and thermodynamic stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. L.E. Toth, Transition Metal Carbides and Nitrides, Academic Press, New York, 1971.
2. Marcus · Thin Solid Films · 1993 · 263 · 33010.1016/0040-6090(93)90691-H ↗
3. Chang · J. Appl. Phys. · 1997 · 81 · 367010.1063/1.365488 ↗
4. So · Thin Solid Films · 1988 · 153 · 50710.1016/0040-6090(87)90210-0 ↗
5. Boukhris · Thin Solid Films · 1997 · 310 · 22210.1016/S0040-6090(97)00348-9 ↗
6. Chiu · J. Mater. Res. · 1993 · 8 · 135310.1557/JMR.1993.1353 ↗
7. Sinke · Appl. Phys. Lett. · 1985 · 47 · 47110.1063/1.96151 ↗
8. Kumar · Thin Solid Films · 1988 · 164 · 41710.1016/0040-6090(88)90171-X ↗
9. Jin · Jpn. J. Appl. Phys. · 1991 · 30 · 205910.1143/JJAP.30.L2059 ↗
10. Huber · J. Vac. Sci. Technol. · 1988 · A6 · 171710.1116/1.575277 ↗
11. Tompkins · J. Appl. Phys. · 1991 · 70 · 387610.1063/1.349194 ↗
12. Mandi · J. Appl. Phys. · 1990 · 68 · 212710.1063/1.346568 ↗
13. Shen · J. Appl. Phys. · 2000 · 87 · 17710.1063/1.371841 ↗
14. Shen · Appl. Phys. Lett. · 1999 · 75 · 221110.1063/1.124967 ↗
15. Moulder · 1995
16. 1994
17. Egelhoff · J. Vac. Sci. Technol. · 1989 · A7 · 216710.1116/1.575951 ↗
18. Shen · Thin Solid Films · 1995 · 263 · 7210.1016/0040-6090(95)06551-2 ↗
19. Lin · J. Vac. Sci. Technol. · 1998 · A16 · 61110.1116/1.581077 ↗
20. Egerton · 1996
21. Thornton · Thin Solid Films · 1989 · 171 · 510.1016/0040-6090(89)90030-8 ↗
22. 1991
23. Shen · Phys. Rev. · 1997 · B56 · 989410.1103/PhysRevB.56.9894 ↗
24. Shen · Appl. Surf. Sci. · 1998 · 125 · 30010.1016/S0169-4332(97)00420-0 ↗