journal article·2003-05

Effects of Nb/Co ratio on the dielectric properties of BaTiO3-based X7R ceramics

Renzheng Chen, Xiaohui Wang, Longtu Li, Zhilun Gui

Materials Science and Engineering: B· Volume 99· Issue 1-3
Publisher page

Abstract

Abstract The influences of the Nb/Co ratio on dielectrical properties, and microstructural evolution of the BaTiO 3 -based X7R ceramics were investigated. The Nb/Co ratios based on the same Co 3 O 4 content of 0.34 wt.% were 3:1, 2:1, 1.7:1, 1.5:1 and 1.3:1, respectively. The ceramics in all of Nb/Co ratio were temperature-stable. The highest dielectric constant at room temperature is 4150. The dielectric constants of the ceramics sintered at the same temperature increased with the decreasing Nb/Co ratio, while the temperature coefficients of capacitance (TCC) rotated clockwise around 25 °C with the decrease of Nb/Co ratio. The TCC under 25 °C increased from negative values to positive ones; the TCC above 25 o C decreased to nearly −15%. The dielectric properties of the Nb-rich composition (Nb/Co=3:1) were dependent strongly on the sintering times, while those of the Co-rich compositions were independent on that. The lattice constants parameters ( a , c , c / a ,) of the ceramics were investigated by XRD analysis. SEM studies showed that the Nb-rich ceramic contained a larger amount of secondary phases, Ba 6 Ti 17 O 40 , than other ceramics. So the Nb/Co ratio can affect the dielectric properties and microstructures of BaTiO 3 ceramics significantly.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric properties of ceramics · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (3)

Show source-provided references
1. MacChesney · J. Am. Ceram. Soc. · 1963 · 197–201 · 46
2. Kishi · Jpn. J. Appl. Phys. · 1997 · 5954-5957 · 36
3. L.T. Li, R.Z. Chen, X.H. Wang, Z.L. Gui, Proceedings of the Twelfth IEEE international symposium on applications of ferroelectrics, 2001, pp. 825–828.