Intermetallic compound formation in Sn–Co–Cu, Sn–Ag–Cu and eutectic Sn–Cu solder joints on electroless Ni(P) immersion Au surface finish after reflow soldering
Source abstract
Abstract
The interfacial reactions between Sn-0.4Co-0.7Cu eutectic alloy and immersion Au/electroless Ni(P)/Cu substrate were investigated after reflow soldering at 260 °C for 2 min. Common Sn-4.0Ag-0.5Cu and eutectic Sn-0.7Cu solders were used as reference. Two types of intermetallic compounds (IMC) were found in the solder matrix of the Sn-0.4Co-0.7Cu alloy, namely coarser CoSn 2 and finer Cu 6 Sn 5 particles, while only one ternary (Cu, Ni) 6 Sn 5 interfacial compound was detected between the solder alloy and the electroless nickel and immersion gold (ENIG) coated substrate. The same trend was also observed for the Sn-Ag-Cu and Sn-Cu solder joints. Compared with the CoSn 2 particles found in the Sn-Co-Cu solder and the Ag 3 Sn particles found in the Sn-Ag-Cu solder, the Cu 6 Sn 5 particles found in both solder systems exhibited finer structure and more uniform distribution. It was noted that the thickness of the interfacial IMCs for the Sn-Co-Cu, Sn-Ag-Cu and Sn-Cu alloys was 3.5 μm, 4.3 μm and 4.1 μm, respectively, as a result of longer reflow time above the alloy's melting temperature since the Sn-Ag-Cu solder alloy has the lowest melting point. © 2006 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Tu · Mater. Sci. Eng. R · 2001 · 34 · 110.1016/S0927-796X(01)00029-8 ↗
2. Abtew · Mater. Sci. Eng. R · 2000 · 27 · 9510.1016/S0927-796X(00)00010-3 ↗
3. Yoon · J. Alloys Compd. · 2004 · 381 · 15110.1016/j.jallcom.2004.03.076 ↗
4. Liu · J. Electron. Mater. · 2004 · 33 · 93510.1007/s11664-004-0019-8 ↗
5. Foley · J. Electron. Mater. · 2000 · 29 · 125810.1007/s11664-000-0021-8 ↗
6. Anderson · J. Electron. Mater. · 2001 · 30 · 105010.1007/s11664-001-0129-5 ↗
7. Liu · J. Electron. Mater. · 2000 · 29 · 62210.1007/s11664-000-0056-x ↗
8. Blair · 1998 · 259
9. Zeng · J. Electron. Mater. · 2001 · 30 · 3510.1007/s11664-001-0212-y ↗
10. Laurila · Mater. Sci. Eng. R · 2005 · 49 · 110.1016/j.mser.2005.03.001 ↗
11. Chan · Mater. Sci. Eng. B · 1998 · 55 · 510.1016/S0921-5107(98)00202-5 ↗
12. So · IEEE Trans-CPMT-B · 1996 · 19 · 661
13. Tu · IEEE Trans-CPMT-B · 1997 · 20 · 87
14. So · IEEE Trans-CPMT-B · 1997 · 20 · 161
15. Park · J. Electron. Mater. · 2001 · 30 · 116510.1007/s11664-001-0145-5 ↗
16. Kim · J. Electron. Mater. · 2004 · 33 · 118210.1007/s11664-004-0121-y ↗
17. Ho · IEEE Trans. Adv. Packag. · 2001 · 24 · 49310.1109/6040.982835 ↗
18. Zeng · IEEE Trans. Electron. Packag. Manuf. · 2002 · 25 · 16210.1109/TEPM.2002.801648 ↗
19. Sharif · J. Alloys Compd. · 2005 · 388 · 7510.1016/j.jallcom.2004.07.015 ↗
20. Liu · J. Electron. Mater. · 2001 · 30 · 115210.1007/s11664-001-0143-7 ↗
21. Zhang · J. Electron. Mater. · 2003 · 32 · 12310.1007/s11664-003-0182-3 ↗
22. Ho · Chem. Mater. · 2002 · 14 · 94910.1021/cm010639h ↗
23. Tsai · J. Electron. Mater. · 2003 · 32 · 120310.1007/s11664-003-0012-7 ↗
24. Kim · Mater. Sci. Eng. A · 2002 · 333 · 10610.1016/S0921-5093(01)01828-7 ↗
25. Kim · J. Alloys Compd. · 2003 · 352 · 22610.1016/S0925-8388(02)01166-0 ↗
26. Shangguan · Soldering Surf. Mount Technol. · 1999 · 11 · 2710.1108/09540919910293847 ↗
27. Li · Mater. Sci. Eng. A · 2005 · 391 · 9510.1016/j.msea.2004.10.007 ↗
28. Sun · J. Alloys Compd. · 2006 · 425 · 19110.1016/j.jallcom.2006.01.080 ↗
29. Sharif · Mater. Sci. Eng. B · 2004 · 106 · 12010.1016/j.mseb.2003.09.003 ↗
30. Sharif · Mater. Sci. Eng. B · 2004 · 106 · 12610.1016/j.mseb.2003.09.004 ↗