Cathode and interdigitated air distributor geometry optimization in polymer electrolyte membrane (PEM) fuel cells
Source abstract
Abstract
A steady-state single-phase three-dimensional electro-chemical model is combined with a nonlinear constrained optimization procedure to maximize the performance of the cathode and the interdigitated air distributor in a polymer electrolyte membrane (PEM) fuel cell. The cathode and the interdigitated air distributor design parameters considered include: the cathode thickness, the thickness of the interdigitated air distributor channels and the width of the interdigitated air distributor channels. A statistical sensitivity analysis is used to determine robustness of the optimal PEM fuel cell design. The results of the optimization analysis show that higher current densities at the membrane/cathode interface are obtained in the PEM cathode and the interdigitated air distributor geometries that promote convective oxygen transport to the membrane/cathode interface and reduce the thickness of the boundary diffusion layer at the same interface. The statistical sensitivity analysis results show that, while the predicted average current density at the membrane/cathode interface is affected by uncertainties in a number of model parameters, the optimal designs of the PEM cathode and the interdigitated air distributor are quite robust.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrochemical Analysis and Applications · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Multi-component transport in porous electrodes in proton exchange membrane fuel cells using the interdigitated gas distributors10.1149/1.1391561 ↗
2. M. Grujicic, K.M. Chittajallu, Design and optimization of polymer electrolyte membrane (PEM) fuel cells, Appl. Surf. Sci., 2003, submitted for publication.
3. M. Grujicic, K.M. Chittajallu, Geometrical optimization of the cathode in polymer electrolyte membrane (PEM) fuel cells, Appl. Surf. Sci., 2003, submitted for publication.10.1016/j.ces.2004.07.045 ↗
4. Three-dimensional Model of a Proton Exchange Membrane Fuel Cell Cathode, The Chemical Engineering Module, FEMLAB 2.3a, COMSOL Inc., Burlington, MA, 2003, pp. 2-218–2-230.
5. http://www.comsol.com, FEMLAB 2.3a, COMSOL Inc., Burlington, MA, 2003.
6. MATLAB, sixth ed., The Language of Technical Computing, The MathWorks Inc., Natick, MA, 2000.
7. M.C. Biggs, Constrained minimization using recursive quadratic programming, in: L.C.W. Dixon, G.P. Szergo (Eds.), Towards Global Optimization, North-Holland, 1975, pp. 341–349.
8. M.S. Phadke, Quality Engineering Using Robust Design, Prentice Hall, Englewood Cliffs, NJ, 1989.10.1007/978-1-4684-1472-1_3 ↗
9. P.J. Ross, Taguchi Techniques for Quality Engineering: Loss Function, Orthogonal Experiments, Parameter and Tolerance Design, second ed., McGraw-Hill, New York, 1996.