Waste into wealth: Plasticization treatment of waste graphite powder and efficient impregnation strategy for the preparation of graphite blocks
Source abstract
Abstract
Recycling the graphite powder generated during the processing of traditional graphite blocks (GBs) are crucial for reducing resource waste and managing graphite dust pollution. With the emergence of the dual-carbon economy, the recycling of waste graphite powder (WGP) has gained significant attention in academia and industry. However, due to its high degree of graphitization, past recycling efforts have been limited to low value-added industries, leading to resource wastage and pollution. In this paper, WGP is utilized as the primary raw material, with a resin transition layer constructed on its surface using a thermosetting phenolic resin solution (PFS), forming WGP@PFS. This imparts plasticity to the otherwise brittle graphite powder. A combination of micro-hot pressing additive manufacturing and electric field-driven jet deposition 3D printing (EJD) creates a network within the substrate, enhancing the impregnation effect. Without the need for high-temperature graphitization (∼3000 °C) and relying solely on atmospheric pressure carbonization, the produced graphite blocks (GBS-WJ) exhibit impressive properties, including a bulk density of 1.77 g/cm 3, compressive strength of 60.76 MPa, and thermal conductivity of 50.34 W/(m·K). This approach reduces energy consumption and process time, offering a novel method for WGP recycling.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphite, nuclear technology, radiation studies · Graphene research and applications · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Preparation of binderless nanopore-isotropic graphite for inhibiting the liquid fluoride salt and Xe135 penetration for molten salt nuclear reactor10.1016/j.carbon.2014.07.022 ↗
2. Carbon seal materials with superior mechanical properties and fine-grained structure fabricated by a new process10.1016/j.matlet.2006.07.139 ↗
3. Damage tolerance of carbon-carbon composites in aerospace application10.1016/j.carbon.2017.10.019 ↗
4. Advantages of natural microcrystalline graphite filler over petroleum coke in isotropic graphite preparation10.1016/j.carbon.2015.03.068 ↗
5. Preparation of graphite/silicon carbide based on SLS/LSI and study of properties10.1016/j.mseb.2024.117666 ↗
6. Preparation and property modulation of three-dimensional bicontinuous graphite/aluminum alloy composites10.1016/j.mseb.2023.116971 ↗
7. Reduced anisotropic properties of Cold Isostatic Pressed graphite matrix compacts10.1016/j.jnucmat.2018.12.046 ↗
8. Effect of soft-mould pressing method on anisotropy of the graphitic matrix spheres: Dry-bag isostatic vs10.1016/j.jnucmat.2022.153950 ↗
9. Ultra-low energy processing of graphite: a fast-track journey towards carbon neutrality
10. Bulk graphite: materials and manufacturing process10.5714/CL.2015.16.3.135 ↗
11. Effect of coal tar pitch modified by sulfur as a binder on the mechanical and tribological properties of bronze-impregnated carbon-matrix composites10.1016/j.msea.2011.01.004 ↗
12. Effect of the average grain size of green pitch coke on the microstructure and properties of self-sintered graphite blocks10.1016/S1872-5805(20)60483-8 ↗
13. Fine-grained graphite with super molten salt barrier property produced from filler of natural graphite flake by a liquid-phase mixing process10.1016/j.carbon.2019.01.029 ↗
14. Effect of oxidative stabilization on the sintering of mesocarbon microbeads and a study of their carbonization10.1016/j.carbon.2011.03.044 ↗
15. Differences and correlations between microstructure and macroscopic properties of mesophase cokes derived from the components of high temperature coal tar pitch10.1016/j.fuel.2021.122330 ↗
16. Improvement of the properties of gypsum-based composites with recycled isostatic graphite powder from the milling production of molds for Electrical Discharge Machining (EDM) used as a new filler10.1016/j.conbuildmat.2015.12.194 ↗
17. Analyses of trace amounts of edge sites in natural graphite, synthetic graphite and high-temperature treated coke for the understanding of their carbon molecular structures10.1016/j.carbon.2017.09.049 ↗
18. Graphite blocks with preferred orientation and high thermal conductivity10.1016/j.carbon.2011.08.017 ↗
19. Binding natural graphite with mesophase pitch: A promising route to future carbon blocks10.1016/j.msea.2014.05.038 ↗
20. Study on interface modification and tribological properties of MCMB-SiC self-lubricating composites10.1016/j.triboint.2024.109253 ↗
21. Densification of MCMB–SiC composites via two-step hot pressing10.1016/j.ceramint.2021.01.086 ↗
22. The microstructural evolution of isotropic graphite under silicon vapor infiltration10.1016/j.jallcom.2024.175231 ↗
23. Improving the self-sintering of mesocarbon-microbeads for the manufacture of high performance graphite-parts10.1016/j.carbon.2011.09.052 ↗
24. The influence of ball-milling on improving the performance of mesocarbon microbeads based carbon blocks10.1016/j.msea.2011.09.030 ↗
25. A new family of carbon materials with exceptional mechanical properties10.1007/s00339-018-1691-5 ↗
26. Enhanced electrochemical performance of the fluidization separation graphite powders from waste power lithium-ion batteries by phenolic resin carbon coated10.1016/j.powtec.2022.117921 ↗
27. Manufacturing conductive polyaniline/graphite nanocomposites with spent battery powder (SBP) for energy storage: A potential approach for sustainable waste management10.1016/j.jhazmat.2016.03.009 ↗
28. High-performance and low-cost coin-cell supercapacitors based on waste graphite from spent dry-cell batteries10.1016/j.jpowsour.2023.233547 ↗
29. The European Green Deal — More Than Climate Neutrality10.1007/s10272-021-0963-z ↗
30. Mechanical properties and thermal conductivity of lightweight and high-strength carbon-graphite thermal insulation materials10.1007/s10853-021-06862-6 ↗
31. The glass‐forming ability and thermal stability of novolac–phenolic resin10.1002/pc.22143 ↗
32. Effect of dichloromethane on the performance and yield rate of pure raw petroleum coke products10.1016/j.matlet.2021.131387 ↗
33. New insight on carbonisation and graphitisation mechanisms as obtained from a bottom-up analytical approach of X-ray diffraction patterns10.1016/j.carbon.2019.03.013 ↗
34. Theoretical X-ray scattering intensity of carbons with turbostratic stacking and AB stacking structures10.1016/S0008-6223(03)00116-7 ↗
35. Raman spectroscopy of graphene and graphite: Disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
36. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
37. 3D-Printed (CoCrFeMnNi)3O4@C-GR dual core–shell composites: Multilevel control and mechanisms of microwave absorption performance10.1016/j.cej.2024.154777 ↗
38. Effect of chemical structure and cross-link density on the heat resistance of phenolic resin10.1016/j.polymdegradstab.2014.11.016 ↗
39. Identifying and mapping chemical bonding within phenolic resin using secondary electron hyperspectral imaging10.1039/D0PY01220C ↗
40. Establishing Physical and Chemical Mechanisms of Polymerization and Pyrolysis of Phenolic Resins for Carbon-Carbon Composites10.1016/j.cartre.2023.100290 ↗
41. High strength carbon/graphite composite materials by using “second coke” as starting material
42. Study on macro and micro shear strength of continuously graded and gap-graded sand10.1016/j.partic.2023.05.002 ↗
43. Particle gradations optimization for powder spreading in additive manufacturing10.1016/j.matdes.2023.112509 ↗
44. Effect of particle size distribution on the packing of powder beds: A critical discussion relevant to additive manufacturing
45. Behavioral Thresholds in Mixtures of Sand and Kaolinite Clay10.1061/(ASCE)GT.1943-5606.0001391 ↗
46. Strong force networks in granular mixtures10.1007/s10035-013-0455-3 ↗
47. The Direct Shear Strength and Dilatancy of Sand–gravel Mixtures10.1007/s10706-004-5832-6 ↗
48. Dominant grains network and behavior of sand–silt mixtures: stress–strain modeling10.1002/nag.2152 ↗
49. Characterization of bio‐filler derived from seashell wastes and its effect on the mechanical, thermal, and flame retardant properties of ABS composites10.1002/pc.23878 ↗
50. Preparation of a graphite/SiC composite casting material and study of its performance10.1016/j.ceramint.2024.04.400 ↗
51. Effects of polysiloxane on thermal conductivity and compressive strength of porous silica ceramics10.1016/j.ceramint.2019.07.109 ↗
52. High interfacial thermal resistance induced low thermal conductivity in porous SiC-SiO2 composites with hierarchical porosity10.1016/j.jeurceramsoc.2019.10.056 ↗
53. Effects of initial particle size on mechanical, thermal, and electrical properties of porous SiC ceramics10.1016/j.ceramint.2020.11.238 ↗
54. Study on the properties of coal-based high-purity graphite10.1166/mex.2019.1547 ↗