journal article·2025-11Open access

Influence of synthesis parameters on the mechanical properties and morphology of organically functionalized silica sol–gel coatings on polymeric substrates

Anna Szczurek, Bartosz Babiarczuk, Anna Gąsiorek, Jerzy Detyna, Walis Jones, Natalia Kaczmarczyk, Jerzy Kaleta, Justyna Krzak

Abstract

The influence of the synthesis parameters on organically modified silica thin coatings obtained by the sol–gel method and applied on polymeric substrates has been considered in this research. The work revealed the relationship between morphology and mechanical properties of coatings with their changes in structure, conditioned by the length of the organic group functionalizing the silica network, the quantitative share of functionalizing groups, and, finally, the influence of acidic catalyst concentration affecting the speed of the reactions and, thus, the microstructure of the materials. For the functionalization of the silica matrix, methyl, ethyl, and n-propyl functionalization groups were introduced by using of corresponding alkoxide precursors: dimethyldiethoxysilane, ethyltriethoxysilane, n-propyltriethoxysilane. The obtained results were compared to native TEOS-based coatings. Coatings were applied on high-density polyethylene (HDPE) and polyethylene terephthalate (PET) substrates previously activated by UV-O 3 treatment and the effectiveness of activation time has been studied. Coatings’ surface investigations by Scanning Electron Microscopy (SEM) and thickness analysis by White Light Reflectance Spectroscopy (WLRS) showed differences in their morphologies. The mechanical properties of coatings were analyzed based on cohesion, adhesion, instrumental Young’s modulus, and instrumental hardness, as determined by scratch-test and ultra nanoindentation examinations, and the influence of the composition and morphology of coatings on these properties has been revealed. It was observed that the quantitative share of organics groups highly affects adhesion and the coatings, and that instrumental hardness is affected to a higher extent than Young’s modulus by synthesis parameters. The presented results, due to analysis of a range of parameters affecting the morphology and mechanical properties of coatings on polymeric substrates, which are poorly investigated in the literature, give the basis for a better understanding and prediction of the characteristics of newly designed coating-substrate systems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicone and Siloxane Chemistry · Metal and Thin Film Mechanics · Electrophoretic Deposition in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Functionalizable sol-gel silica coatings for corrosion mitigation10.3390/ma11020197 ↗
2. Protective properties of SiO2 with SiO2 and Al2O3 nanoparticles sol-gel coatings deposited on FeCrAl alloys10.1016/j.ceramint.2018.07.295 ↗
3. Outstanding durability of sol-gel thermal barrier coatings reinforced by YSZ-fibers10.1016/j.jeurceramsoc.2018.06.025 ↗
4. Processing thermal barrier coatings via sol-gel route: Crack network control and durability10.1016/j.surfcoat.2017.11.008 ↗
5. Hybrid silica membranes with enhanced hydrogen and CO2 separation properties10.1016/j.memsci.2015.03.084 ↗
6. Structural evolution of nickel oxide silica sol-gel for the preparation of interlayer-free membranes10.1016/j.jnoncrysol.2016.05.031 ↗
7. Control of the degradation of silica sol-gel hybrid coatings for metal implants prepared by the triple combination of alkoxysilanes10.1016/j.jnoncrysol.2016.09.026 ↗
8. Fabrication and characterization of porous biomedical Vitallium alloy with 58S bioglass coating prepared by sol-gel method10.1016/j.apsusc.2019.144959 ↗
9. Sol-gel Science: The physics and chemistry of sol-gel processing, gulf professional publishing
10. Mechanical properties and adhesion characteristics of hybrid sol–gel thin films10.1016/j.surfcoat.2004.06.004 ↗
11. Enhanced mechanical properties in organofluorosilica thin films
12. Palmisano · ORMOSIL Thin Films: Tuning Mechanical Properties via a Nanochemistry Approach · 2006
13. Mechanical properties and decohesion of sol–gel coatings on metallic and glass substrates10.1007/s10971-019-05196-9 ↗
14. M. Oubaha, ed., World Scientific Reference of Hybrid Materials. Volume 3: Sol-Gel Strategies for Hybrid Materials, World Scientific, 2019. https://doi.org/10.1142/10993-VOL3.10.1142/10993-vol3 ↗
15. Organically functionalized sol-gel silica network growth10.1016/j.ceramint.2020.02.094 ↗
16. B. Bellaton R. Consiglio J. Woirgard Measuring head for nanoindentation instrument and measuring method, WO 2014 202551 Al, 2014.
17. Novel ultra nanoindentation method with extremely low thermal drift: Principle and experimental results10.1557/jmr.2009.0114 ↗
18. Sol-Gel Protective Coatings for Metals, in: Handb. Sol-Gel Sci.
19. Polymers in our daily life, Tabriz Univ
20. Research Trends in Polymer Materials for Use in Lightweight Vehicles10.1007/s12541-015-0029-x ↗
21. The plastics revolution: how chemists are pushing polymers to new limits10.1038/536266a ↗
22. G. Strobl The physics of polymers. Concepts for Understanding Their Structures and Behavior, 3rd ed., Springer Berlin Heidelberg, Heidelberg, 2007 10.1007/978-3-540-68411-4.
23. I.M. Ward J. Sweeney Mechanical Properties of Solid Polymers 3rd ed John Wiley & Sons Ltd West Sussex UK 2012 10.1002/9781119967125.10.1002/9781119967125 ↗
24. Influence of molecular weight and molecular weight distribution on mechanical properties of polymers10.1002/pen.760220402 ↗
25. Mechanical performance of polymer systems: The relation between structure and properties10.1016/j.progpolymsci.2005.06.009 ↗
26. Transparent semi-crystalline polymeric materials and their nanocomposites: A review10.1002/pen.25489 ↗
27. An overview of polymeric materials for automotive applications10.1016/j.matpr.2017.02.278 ↗
28. V. Siracusa, Food Packaging Permeability Behaviour: A Report, Int. J. Polym. Sci. 2012 (2012) 1–11. http://www.hindawi.com/journals/ijps/2012/302029/.10.1155/2012/302029 ↗
29. Polymer degradation: A short review10.1515/cti-2020-0015 ↗
30. Effects of high temperature and ultraviolet radiation on polymer compositesin: Durab10.1016/B978-0-08-102290-0.00018-0 ↗
31. Creep in photovoltaic modules: Examining the stability of polymeric materials and components
32. Correlation between Surface Energy and Adhesion Force of Polyethylene/Paperboard: A Predictive Tool for Quality Control in Laminated Packaging10.1155/2018/2709037 ↗
33. Estimation of the Surface Free Energy of Polymers10.1002/app.1969.070130815 ↗
34. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
35. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
36. Chapter 7 - Inferential Statistics IV: Choosing a Hypothesis Test
37. Levene’s Test for Relative Variation10.2307/2413207 ↗
38. The small sample behavior of some statistics which test the equality of several means10.1080/00401706.1974.10489158 ↗
39. Taking parametric assumptions seriously: Arguments for the use of welch’s f-test instead of the classical f-test in one-way ANOVA
40. Hydrolysis and condensation of silicates: effects on structure10.1016/0022-3093(88)90005-1 ↗
41. Effect of UV/ozone treatment on the wettability and adhesion of polymeric systems
42. Comparison of surface modification methods for improving the compatibility of recycled plastic film-based aggregates10.3390/polym13223956 ↗
43. Improved adhesion to polymers by UV/ozone surface oxidation10.1016/0143-7496(96)88482-X ↗
44. Fundamentals of sol-gel dip coating10.1016/0040-6090(91)90158-T ↗
45. Sol–gel based materials for biomedical applications10.1016/j.pmatsci.2015.12.001 ↗
46. Sol–gel derived hybrid coatings for the improvement of scratchresistance of polyethylene10.1007/s10971-007-1560-8 ↗
47. The effect of friction on scratch adhesion testing: application to a sol–gel coating on polypropylene10.1016/S0040-6090(99)00729-4 ↗
48. Scratch-resistant sol–gel coatings on pristine polycarbonate10.1039/C5NJ00426H ↗
49. Effect of addition of surface modified nanosilica into silica-zirconia hybrid sol-gel matrix10.1016/j.ceramint.2012.10.276 ↗
50. Handbook of Adhesion Technology · 2011
51. “Ultramicroporous” silica-based supported inorganic membranes10.1016/0376-7388(93)85067-7 ↗
52. Sol-gel strategies for controlled porosity inorganic materials10.1016/0376-7388(93)E0129-8 ↗
53. B.A. Latella, M.V. Swain, M. Ignat Indentation and Fracture of Hybrid Sol-Gel Silica Films J. Nemecek (Ed.) Nanoindentation Mater. Sci. InTech 2012. 133-160 10.5772/48140.10.5772/48140 ↗
54. Nanoindentation and nanoscratch profiles of hybrid films based on (γ-methacrylpropyl)trimethoxysilane and tetraethoxysilane10.1016/j.actamat.2006.06.057 ↗
55. Nanoindentation and adhesion of sol-gel-derived hard coatings on polyester10.1557/JMR.2000.0025 ↗