The influence of microstructural evolution on performance degradation in solid oxide fuel cells
Source abstract
Abstract
• The formation of pores/cracks at the interfaces induced ohmic resistance increasing. • The new phases lead to the increase of activation polarization resistance. • The ohmic and polarization resistances increased during long-term service. The microstructure evolution effects performance degradation of solid oxide fuel cells (SOFCs) under elevated temperatures. The microstructural evolution, including elemental diffusion, phase changes, and Ni agglomeration, is studied via X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectrometer (SEM-EDS) techniques. The ohmic resistance and polarization impedance, including activation polarization impedance and concentration resistance, causing the performance degradation, are estimated using electrochemical impedance spectroscopy (EIS) and distribution of relaxation time (DRT) techniques. The voltage gradually decreases from 0.9 V, at the beginning of the load, to 0.75 V after 240 h of service. The formation of pores at the (La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ ) LSCF/(Gd 0.1 Ce 0.9 O 2-δ ) GDC interface and cracks at the (8 mol% Y 2 O 3 -stabilized ZrO 2 ) YSZ/NiO-YSZ interface induce the increase in ohmic resistance. The increase in activation polarization resistance is attributed to the formation of the SrZrO 3 phase and Gd 2 (Zr 1- x Ce x ) 2 O 7 , at the YSZ/GDC interface, and the redistribution and coarsening of Ni. The formation of Co– or Fe-based oxides in the LSCF layer slightly increases the concentration polarization impedance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Durability prediction of solid oxide fuel cell anode material under thermomechanical and fuel gas contaminant effects10.1111/j.1744-7402.2009.02415.x ↗
2. Long-Term Operation of Solid Oxide Fuel Cells and Preliminary Findings on Accelerated Testing10.1016/j.ijhydene.2020.01.074 ↗
3. Achievements of NEDO durability projects on SOFC stacks in the light of physicochemical mechanisms10.1002/fuce.201800187 ↗
4. Mechanism of SrZrO3 formation at GDC/YSZ interface of SOFC cathode10.1149/2.0551811jes ↗
5. Spray pyrolysis of doped-ceria barrier layers for solid oxide fuel cells10.1016/j.surfcoat.2017.01.066 ↗
6. Evolution of cathode-interlayer interfaces and its effect on long-term degradation10.1016/j.jpowsour.2020.227894 ↗
7. Szász, J., Wankmüller, F., Wilde, V., et al., Nature and Functionality of La0. 58Sr0. 4Co0. 2Fe0. 8O3-δ/Gd0. 2Ce0. 8O2-δ/Y0. 16Zr0. 84O2-δ Interfaces in SOFCs, Journal of The Electrochemical Society, 165(2018) F898. F898. Doi: 10.1149/2.0031811jes.10.1149/2.0031811jes ↗
8. Microstructure degradation of cermet anodes for solid oxide fuel cells: Quantification of nickel grain growth in dry and in humid atmospheres10.1016/j.jpowsour.2010.08.017 ↗
9. Performance estimation by multiphase-field simulations and transmission-line modeling of nickel coarsening in FIB-SEM reconstructed Ni-YSZ SOFC anodes I: Influence of wetting angle10.1016/j.jpowsour.2023.233031 ↗
10. Performance evolution of Ni-YSZ anode-supported SOFCs during initial-stage operation10.1149/10301.1271ecst ↗
11. Performance degradation of solid oxide fuel cells analyzed by evolution of electrode processes under polarization10.1016/j.jpowsour.2020.229237 ↗
12. Quantifying the performance evolution of solid oxide fuel cells during initial aging process10.1016/j.jpowsour.2021.230432 ↗
13. Enhanced carbon deposition tolerance of SOFC anodes under triode operation10.1007/s11244-015-0498-2 ↗
14. Ni–YSZ SOFC anodes—Minimization of carbon deposition10.1016/j.jeurceramsoc.2006.04.107 ↗
15. Effects of impurities on microstructure in Ni/YSZ–YSZ half-cells for SOFC10.1016/S0167-2738(03)00271-6 ↗
16. Three-dimensional microstructural imaging of sulfur poisoning-induced degradation in a Ni-YSZ anode of solid oxide fuel cells10.1038/srep05246 ↗
17. Experimental investigations of cell resistances to characterize the concentration polarization behavior of 10× 10 cm2 solid oxide fuel cells10.1016/j.jpowsour.2021.230678 ↗
18. Determination of relevant factors affecting the surface oxygen exchange coefficient of solid oxide fuel cell cathode with ionic conducting oxide coating10.1016/j.ssi.2020.115372 ↗
19. Electrospun core–shell fibers for high-efficient composite cathode-based solid oxide fuel cells10.1021/acs.energyfuels.0c02953 ↗
20. Effect of polarization on Sr and Zr diffusion behavior in LSCF/GDC/YSZ system10.1016/j.ssi.2014.04.002 ↗
21. Fu, Y., Theoretical and experimental study of solid oxide fuel cell (SOFC) using impedance spectra (Doctoral dissertation, Massachusetts Institute of Technology).22. http://dspace.mit.edu/handle/1721.1/7582.
22. Call attention to using DRT and EIS to quantify the contributions of solid oxide cell components to the total impedance10.1016/j.ijhydene.2022.08.093 ↗
23. Mark · 2017
24. Comparative study on solid oxide fuel cell anode microstructure evolution after long-term operation10.1016/j.jpowsour.2021.229792 ↗
25. Electrochemical impedance analysis of SOFC with transmission line model using distribution of relaxation times (DRT)10.1149/1945-7111/aba00f ↗
26. Modelling the porous cathode of a SOFC: oxygen reduction mechanism effect10.1007/s10800-006-9208-x ↗
27. Interfacial reaction and electrochemical properties of dense (La, Sr) CoO3− δ cathode on YSZ (1 0 0)10.1016/j.jpcs.2004.06.057 ↗
28. Study on the effects of polarization on local morphological change of nickel at active three-phase-boundary using patterned nickel-film electrode in solid oxide fuel cell anode10.1016/j.actamat.2017.05.051 ↗
29. The role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells10.1016/S0167-2738(00)00633-0 ↗
30. A simplified approach to predict performance degradation of a solid oxide fuel cell anode10.1016/j.jpowsour.2018.04.080 ↗
31. Degradation Mechanisms in Solid-Oxide Fuel and Electrolyzer Cells: Analytical Description of Nickel Agglomeration in a Ni/Y S Z Electrode10.1103/PhysRevApplied.7.044007 ↗
32. Araki, W., Yamaguchi, T., Arai, Y., et al., Strontium surface segregation in La0. 58Sr0. 4Co0. 2Fe0. 8O3-δ annealed under compression, Solid state ionics, 268 (2014) 1-6. Doi: 10.1016/j.ssi.2014.09.019.10.1016/j.ssi.2014.09.019 ↗
33. Role of oxygen vacancy in dissociation of oxygen molecule on SOFC cathode: Ab initio molecular dynamics simulation10.1016/j.ssi.2015.06.008 ↗
34. Oxide diffusion in innovative SOFC cathode materials10.1039/C4FD00129J ↗
35. Structural and electrical characterization of the Co-doped Ca2Fe2O5 brownmillerite: Evaluation as SOFC-cathode materials10.1016/j.ijhydene.2015.01.067 ↗
36. Release and uptake of oxygen in mixed-conducting SOFC cathode materials measured by temperature-programmed methods10.1007/BF02375965 ↗
37. Improving the durability of cobaltite cathode of solid oxide fuel cells–a review10.1039/D3RA02571C ↗
38. Microstructural comparison of solid oxide electrolyser cells operated for 6100 h and 9000 h10.1016/j.jpowsour.2014.10.188 ↗
39. Degradation factors in (La, Sr)(Co, Fe) O3-δ cathode/Sm2O3–CeO2 interlayer/Y2O3–ZrO2 electrolyte system during operation of solid oxide fuel cells10.1016/j.jpowsour.2016.02.052 ↗
40. Effect of SrZrO3 formation at LSCF-cathode/GDC-interlayer interfaces on the electrochemical properties of solid oxide fuel cells10.1149/07542.0075ecst ↗
41. Characterization of doped yttrium chromites as electrodes for solid oxide fuel cell by impedance method10.1149/2.096404jes ↗
42. Degradation analysis of solid oxide fuel cells with (La, Sr) (Co, Fe) O3-δ cathode/Gd2O3–CeO2 interlayer/Y2O3–ZrO2 electrolyte system: the influences of microstructural change and solid solution formation10.1149/09101.1247ecst ↗
43. Pang, S., Yang, G., Su, Y., et al., A-site cation deficiency tuned oxygen transport dynamics of perovskite Pr0. 5Ba0. 25-xCa0. 25CoO3-δ oxide for intermediate temperature solid oxide fuel cells, Ceramics International, 45 (2019) 14602-14607. Doi: 10.1016/j.ceramint.2019.04.178.10.1016/j.ceramint.2019.04.178 ↗