Production of carbon nanomaterials and value-added ferrous resource from spent toner powder: Influence of catalyst and optimization of process parameters
Source abstract
Abstract
Developing effective waste management strategies and transforming waste into valuable products is a significant challenge that has been posed to the scientific community. This study offers a method for upcycling end-of-life waste toner powder into high-value products such as multiwalled carbon nanotubes (MWCNTs), graphene nanosheets (GNS), carbon nano onions (CNOs), magnetite, and amorphous iron oxide nanocomposite in a cost-effective and environmentally friendly manner. The proposed process consists of a three-stage system, which includes a pyrolysis and chemical vapor deposition (CVD) unit, designed to maximize the utilization of the feedstock. The influence of bi and tri-metallic catalysts and optimization of process parameters on the yield, quality, purity, and morphology of carbon products were also studied. The structural, thermal, and magnetic properties of the synthesized carbon and ferrous materials were evaluated using XRD, Raman spectroscopy, TGA, FESEM, HRTEM, VSM, and XPS. HRTEM images illustrate the formation of MWCNTs over NiMo, whereas mixed materials such as MWCNTs, GNS, and CNOs were obtained over Fe- and Co-based catalysts. A maximum MWCNTs yield of 278 % was achieved when the growth temperature was set to 800 °C and the pyrolysis temperature was 700 °C, resulting in a total solid product recovery of 65 % with over 90 % purity. As the growth temperature increased from 700 to 900 °C, the size of the MWCNTs increased, and their average diameters increased from 44 to 78 nm.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Advanced materials and composites · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
2. Current advances on biomedical applications and toxicity of MWCNTs: a review10.1007/s12668-023-01110-4 ↗
3. H. Meskher, T. Ragdi, A.K. Thakur, S. Ha, I. Khelfaoui, R. Sathyamurthy, S.W. Sharshir, A.K. Pandey, R. Saidur, P. Singh, F. Sharifian jazi, I. Lynch, A Review on CNTs-Based Electrochemical Sensors and Biosensors: Unique Properties and Potential Applications, Crit. Rev. Anal. Chem. (n.d.) 1–24. doi: 10.1080/10408347.2023.2171277.10.1080/10408347.2023.2171277 ↗
4. B.A. Abdulkadir, H.D. Setiabudi, Recent Advances in Multi-Walled Carbon Nanotubes for High-Efficient Solid-State Hydrogen Storage: A Review, Chem. Eng. Technol. n/a (n.d.) e202400067. doi: 10.1002/ceat.202400067.10.1002/ceat.202400067 ↗
5. Carbon nanotube- and graphene-based nanomaterials and applications in high-voltage supercapacitor: a review10.1016/j.carbon.2018.10.010 ↗
6. A review on carbon nanotube: an overview of synthesis, properties, functionalization, characterization, and the application10.1016/j.mseb.2021.115095 ↗
7. Wear performance and mechanical properties of MWCNT/HDPE nanocomposites for gearing applications10.1016/j.jmrt.2020.09.129 ↗
8. A review on novel composites of MWCNTs mediated semiconducting materials as photocatalysts in water treatment10.1016/j.scitotenv.2018.07.375 ↗
9. Introduction to carbon nanotube and nanofiber smart materials10.1016/j.compositesb.2006.02.011 ↗
10. Carbon nanotubes: a review on properties, synthesis methods and applications in micro and nanotechnology10.1007/s00542-021-05211-6 ↗
11. Natural and waste hydrocarbon precursors for the synthesis of carbon based nanomaterials: graphene and CNTs10.1016/j.rser.2015.12.120 ↗
12. Co-production of hydrogen and carbon nanotubes from catalytic pyrolysis of waste plastics on Ni-Fe bimetallic catalyst10.1016/j.enconman.2017.06.012 ↗
13. Heliyon Recent advancements in the use of plastics as a carbon source for carbon nanotubes synthesis - a review10.1016/j.heliyon.2024.e24679 ↗
14. A review on carbon materials production from plastic wastes10.1016/j.cej.2022.139725 ↗
15. A review on the toxic E-waste killing health and environment – today’s global scenario10.1016/j.matpr.2021.05.516 ↗
16. Environmental pollution of electronic waste recycling in India: a critical review10.1016/j.envpol.2015.11.027 ↗
17. An environmental friendly recovery production line of waste toner cartridges10.1016/j.jhazmat.2010.09.074 ↗
18. Pyrolysis routine of organics and parameter optimization of vacuum gasification for recovering hazardous waste toner10.1021/acssuschemeng.7b02024 ↗
19. An ecofriendly, cost-effective, lightweight microwave absorber based on waste toner10.1007/s11664-020-08679-6 ↗
20. Heat-treatment recycling of waste toner and its applications in lithium ion batteries10.1007/s10163-017-0599-z ↗
21. Waste toner-derived porous iron oxide pigments with enhanced catalytic degradation property10.1016/j.envres.2022.114695 ↗
22. Waste toner-derived carbon/Fe3O4 nanocomposite for high-performance supercapacitor10.1021/acsomega.9b01337 ↗
23. Thermal transformation of waste toner powder into a value-added ferrous resource10.1021/acssuschemeng.7b02875 ↗
24. An innovative transformation of waste toner powder into magnetic g-C3N4-Fe2O3 photocatalyst: sustainable e-waste management10.1016/j.jece.2019.103041 ↗
25. Synthesis of MWCNTs using waste toner powder as carbon source by chemical vapor deposition method10.1080/1536383X.2019.1652169 ↗
26. A critical review of heterogeneous catalyst design for carbon nanotubes synthesis: Functionalities, performances, and prospects10.1016/j.fuproc.2022.107624 ↗
27. Carbon nanotubes: an example of multiscale development—a mechanistic view from the subnanometer to the meter scale10.1002/anie.201302791 ↗
28. Carbon nanotube mass production: principles and processes10.1002/cssc.201100177 ↗
29. A review of carbon nanomaterials’ synthesis via the chemical vapor deposition (CVD) method10.3390/ma11050822 ↗
30. X. Lim, S. Low, W. Oh, A critical review of heterogeneous catalyst design for carbon nanotubes synthesis : Functionalities , performances , and prospects, 241 (2023).10.1016/j.fuproc.2022.107624 ↗
31. Growth of carbon nanotubes by catalytic decomposition of CH4 or CO on a Ni-MgO catalyst10.1016/S0008-6223(97)00100-0 ↗
32. Study of the productivity of MWCNT over Fe and Fe–Co catalysts supported on SiO2, Al2O3 and MgO10.1016/j.ejpe.2014.05.005 ↗
33. G. V Golubtsov, M.A. Kazakova, A.G. Selyutin, A. V Ishchenko, V.L. Kuznetsov, S. Branch, Mono- , Bi- , and trimetallic catalysts for the synthesis of multiwalled carbon nanotubes based on iron subgroup metals, 61 (2020) 640–651. doi: 10.1134/S0022476620040186.10.1134/S0022476620040186 ↗
34. Simultaneous production of hydrogen and carbon nanotubes from biogas over mono- and bimetallic catalyst10.1016/j.jece.2022.107910 ↗
35. Significant role of molybdenum promoted TiO2 catalysts for carbon nanotubes production and their polymer nanocomposites10.1016/j.matpr.2021.03.120 ↗
36. Fe – Mo and Co – Mo catalysts with varying composition for multi-walled carbon nanotube
37. Catalytic functions of Mo/Ni/MgO in the synthesis of thin carbon nanotubes10.1021/jp045284e ↗
38. Impact of Co / Mo ratio on the activity of CoMo / MgO catalyst for production of high-quality multi-walled carbon nanotubes from polyethylene waste10.1016/j.matchemphys.2019.121879 ↗
39. Synthesis and characterization of CNTs using polypropylene waste as precursor10.1016/j.mseb.2015.01.004 ↗
40. A novel design for mass production of multi-walled carbon nanotubes using Co-Mo/MgO catalyst via pyrolysis of polypropylene waste: effect of operating conditions10.1080/1536383X.2018.1476344 ↗
41. Processing of mixed-plastic waste to fuel oil, carbon nanotubes and hydrogen using multi–core reactor10.1016/j.cep.2017.09.011 ↗
42. Mo / MgO as an efficient catalyst for methane decomposition into CO x - free hydrogen and multi-walled carbon nanotubes10.1016/j.jece.2021.106023 ↗
43. Decomposition of metal carbides as an elementary step of carbon nanotube synthesis10.1016/j.carbon.2009.07.009 ↗
44. Production of nanostructured carbon materials using Fe–Mo/MgO catalysts via mild catalytic pyrolysis of polyethylene waste10.1016/j.cej.2018.08.046 ↗
45. Development of high ‑ performance nickel ‑ based catalysts for production of hydrogen and carbon nanotubes from biogas
46. Transformation of waste toner to iron using E-waste plastics as a carbon resource10.1016/j.jclepro.2018.05.010 ↗
47. Catalyst excitation by radio frequency for improved carbon nanotubes synthesis10.1016/j.cplett.2006.08.007 ↗
48. Formation of carbon nanofibers and carbon nanotubes through methane decomposition over supported cobalt catalysts10.1021/jp048827t ↗
49. Co-production of hydrogen and carbon nanotubes from real-world waste plastics: Influence of catalyst composition and operational parameters10.1016/j.apcatb.2017.09.035 ↗
50. Synthesis of carbon nanomaterials through up-cycling agricultural and municipal solid wastes10.1021/ie202711h ↗
51. Spatially resolved Raman spectroscopy of single- and few-layer graphene10.1021/nl061702a ↗
52. Catalytic decomposition of natural gas to CO/CO2-free hydrogen production and carbon nanomaterials using MgO-supported monometallic iron family catalysts10.1080/00986445.2013.836631 ↗
53. Controllable synthesis of carbon nanotubes by changing the Mo content in bimetallic Fe–Mo/MgO catalyst10.1016/j.matchemphys.2011.02.028 ↗
54. Catalytic growth of carbon nanotubes on zeolite supported iron, ruthenium and iron/ruthenium nanoparticles by chemical vapor deposition in a fluidized bed reactor10.1016/j.powtec.2010.10.005 ↗
55. Effective synthesis of carbon nanotubes via catalytic decomposition of methane: Influence of calcination temperature on metal–support interaction of Co–Mo/MgO catalyst10.1016/j.jpcs.2013.05.023 ↗
56. Intermetallic catalyst for carbon nanotubes (CNTs) growth by thermal chemical vapor deposition method10.1016/j.carbon.2005.12.043 ↗
57. Co-synthesis, purification and characterization of single- and multi-walled carbon nanotubes using the electric arc method10.1016/j.carbon.2006.07.027 ↗
58. Evidence of composition deviation of metal particles of a Ni–Cu/Al2O3 catalyst during methane decomposition to COx-free hydrogen10.1016/j.ijhydene.2008.09.106 ↗
59. Methane decomposition to COx-free hydrogen and nano-carbon material on group 8–10 base metal catalysts: A review10.1016/j.cattod.2010.12.042 ↗
60. Mass production of CNTs using CVD multi-quartz tubes10.1007/s12206-016-1031-7 ↗
61. Formation of bamboo-shaped carbon filaments and dependence of their morphology on catalyst composition and reaction conditions10.1016/S0008-6223(00)00274-8 ↗
62. Formation of bamboo-like nanocarbon and evidence for the quasi-liquid state of nanosized metal particles at moderate temperatures10.1039/a902281c ↗
63. Recent developments in the synthesis of graphene and graphene-like structures from waste sources by recycling and upcycling technologies: a review10.1007/s41127-020-00033-1 ↗
64. Unique Nanostructures of Carbon Nano Onions
65. MWCNTs and carbon onions grown by CVD method on nickel-cobalt alloy nanocomposites prepared via novel alcogel electrolysis technique and its oxygen evolution reaction application10.1088/2053-1591/ab41d4 ↗
66. Preparation of carbon nano-onions and their application as anode materials for rechargeable lithium-ion batteries10.1021/jp2007599 ↗
67. Prospects and research progress in nano onion-like fullerenes10.1016/S1872-5805(09)60001-9 ↗
68. One-pot sol-gel synthesis of MgO nanoparticles supported nickel and iron catalysts for undiluted methane decomposition into COx free hydrogen and nanocarbon10.1016/j.apcatb.2017.04.070 ↗
69. C. Vi, Preparation and application synthesis of magnetic nanocomposite using waste toner for the removal, (2018) 27654–27660. doi: 10.1039/c8ra05291c.10.1039/C8RA05291C ↗
70. Characterization of thin multi-walled carbon nanotubes synthesized by catalytic chemical vapor deposition10.1016/j.cplett.2005.07.064 ↗
71. Unveiling the photosensitive and magnetic properties of amorphous iron nanoparticles with its application towards decontamination of water and cancer treatment10.1016/j.jmrt.2021.07.145 ↗
72. Controlling hydrazine reduction to deposit iron oxides on oxidized activated carbon for supercapacitor application10.1016/j.energy.2015.04.040 ↗
73. Preparation of MWCNT-Fe3O4 nanocomposites from iron sand using sonochemical route10.1088/1757-899X/202/1/012013 ↗
74. Conversion of municipal sewage sludge into biogenic multi-walled carbon nanotubes and hydrogen using X-Mo/MgO (X=Co, Fe, Ni) catalysts through pyrolysis-chemical vapor deposition process10.1016/j.cej.2024.153794 ↗
75. Effect of temperature on growth and structure of carbon nanotubes by chemical vapor deposition10.1007/s003390201284 ↗
76. Effect of growth temperature and feedstock:catalyst ratio on the production of carbon nanotubes and hydrogen from the pyrolysis of waste plastics10.1016/j.jaap.2015.01.012 ↗
77. Catalytic pyrolysis of polypropylene to synthesize carbon nanotubes and hydrogen through a two-stage process10.1016/j.polymdegradstab.2011.08.008 ↗
78. Controlling the diameter distribution of carbon nanotubes grown from camphor on a zeolite support10.1016/j.carbon.2004.10.014 ↗
79. Investigation of low and mild temperature for synthesis of high quality carbon nanotubes by chemical vapor deposition10.1016/j.apsusc.2013.12.026 ↗
80. CVD growth of carbon nanotube bundle arrays10.1016/j.carbon.2006.03.022 ↗
81. Temperature-dependent growth of vertically aligned carbon nanotubes in the range 800−1100 °C10.1021/jp020488l ↗
82. Ni@CNT nanocomposites as novel highly effective carbocatalysts for Hydrogenation/Dehydrogenation reactions10.1016/j.jcat.2023.115108 ↗
83. Evaluating the characteristics of multiwall carbon nanotubes10.1016/j.carbon.2011.03.028 ↗