The effects of light irradiation on CsPbIBr2 films
Source abstract
Abstract
In the present, we investigate the light-induced phase instability and the recovery in light-free for CsPbIBr2 film. Both 585 nm and 695 nm photoluminescence (PL) peaks are detected by illuminating films. Results show that the appearance and the intensity of 585 nm and 695 nm PL peaks are affected by the wavelength, remaining time, and intensity of the illuminating light. Under short time illumination, the 695 nm PL peak may disappear after staying light-free, with light–dark reversible behavior. Under long time illumination, the 695 nm PL peak still exist in light-free and become irreversible behavior, which is caused by the formation of I-rich and Br-rich small grains, destroyed the homogeneous phase structure, and formed new steady states. X-ray diffraction analysis and the first principle calculations proved the mechanism of light-induced phase separation. We argue that CsPbIBr2-based solar cells are difficult to be applied before inhibiting the phase separation of CsPbIBr2.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · 2D Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber10.1126/science.1243982 ↗
2. Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells10.1021/ja809598r ↗
3. Recent Advance in Solution-Processed Organic Interlayers for High-Performance Planar Perovskite Solar Cells10.1002/advs.201800159 ↗
4. High-Efficiency Perovskite Solar Cells10.1021/acs.chemrev.0c00107 ↗
5. Pseudo-halide anion engineering for alpha-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
6. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
7. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
8. Towards Oxide Electronics: a Roadmap10.1016/j.apsusc.2019.03.312 ↗
9. The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers10.1002/anie.201503153 ↗
10. Decomposition and Cell Failure Mechanisms in Lead Halide Perovskite Solar Cells10.1021/acs.inorgchem.6b01307 ↗
11. Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite10.1002/aenm.201500477 ↗
12. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
13. High-efficiency perovskite solar cells based on the black polymorph of HC(NH2)2PbI310.1002/adma.201401137 ↗
14. Temperature-Reliable Low-Dimensional Perovskites Passivated Black-Phase CsPbI3 toward Stable and Efficient Photovoltaics10.1002/anie.202201300 ↗
15. Effect of Side-Group-Regulated Dipolar Passivating Molecules on CsPbBr 3 Perovskite Solar Cells10.1021/acsenergylett.1c01060 ↗
16. Fabrication of CsPbBr 3 films with high quality using a simple method
17. Improving the Quality of CsPbBr 3 Films by Applying the Light Soak10.1021/acsaem.1c03876 ↗
18. Preparation of highly efficient and stable CsPbBr 3 perovskite solar cells based on an anti-solvent rinsing strategy10.1016/j.solmat.2021.111420 ↗
19. A Novel Anion Doping for Stable CsPbI2Br Perovskite Solar Cells with an Efficiency of 15.56% and an Open Circuit Voltage of 1.30 V10.1002/aenm.201902279 ↗
20. Untapped Potentials of Inorganic Metal Halide Perovskite Solar Cells10.1016/j.joule.2019.02.002 ↗
21. Fully Air-Processed Dynamic Hot-Air-Assisted M:CsPbI2Br (M: Eu2+, In3+) for Stable Inorganic Perovskite Solar Cells10.1016/j.matt.2020.11.008 ↗
22. Stoichiometric Dissolution of Defective CsPbI2Br Surfaces for Inorganic Solar Cells with 17.5% Efficiency10.1002/aenm.202103933 ↗
23. Solvent-engineering-processed CsPbIBr 2 inorganic perovskite solar cells with efficiency of ∼11%10.1016/j.solmat.2022.111640 ↗
24. Surface passivation and hole extraction: Bifunctional interfacial engineering toward high-performance all-inorganic CsPbIBr 2 perovskite solar cells with efficiency exceeding 12%10.1016/j.jechem.2022.07.035 ↗
25. Double-Side Interface Engineering Synergistically Boosts the Efficiency of Inorganic CsPbIBr 2 Perovskite Solar Cells Over 12%10.1002/adom.202200802 ↗
26. Intermolecular Exchange Boosts Efficiency of Air-Stable, Carbon-Based All-Inorganic Planar CsPbIBr 2 Perovskite Solar Cells to Over 9%10.1002/aenm.201802080 ↗
27. Seed-Assisted Growth for Low-Temperature-Processed All-Inorganic CsPbIBr 2 Solar Cells with Efficiency over 1010.1002/smll.202001535 ↗
28. High-Performance CsPbIBr 2 Perovskite Solar Cells: Effectively Promoted Crystal Growth by Antisolvent and Organic Ion Strategies10.1021/acsami.9b09171 ↗
29. Xu, Zinc and Acetate Co-doping for Stable Carbon-Based CsPbIBr 2 Solar Cells with Efficiency over 10.6%, ACS Appl
30. Guanidinium Thiocyanate Additive Engineering for High-Performance CsPbIBr 2 Solar Cells with an Efficiency of 10.90%, ACS Appl
31. Surface reconstruction strategy improves the all-inorganic CsPbIBr 2 based perovskite solar cells and photodetectors performance10.1016/j.nanoen.2022.106960 ↗
32. Morphology control of perovskite film for efficient CsPbIBr 2 based inorganic perovskite solar cells10.1016/j.solmat.2020.110878 ↗
33. Detailed Balance Limit of Efficiency of p-n Junction Solar Cells10.1063/1.1736034 ↗
34. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics10.1039/C4SC03141E ↗
35. Phase Segregation Enhanced Ion Movement in Efficient Inorganic CsPbIBr 2 Solar Cells10.1002/aenm.201700946 ↗
36. Photoinduced Phase Segregation Leading to Evident Open-Circuit Voltage Loss in Efficient Inorganic CsPbIBr 2 Solar Cells10.1021/acs.jpclett.0c02076 ↗
37. Thermodynamic Origin of Photoinstability in the CH3NH3Pb(I1-xBrx)3 Hybrid Halide Perovskite Alloy10.1021/acs.jpclett.6b00226 ↗
38. Tunable Polaron Distortions Control the Extent of Halide Demixing in Lead Halide Perovskites10.1021/acs.jpclett.8b01512 ↗
39. Origin of Reversible Photoinduced Phase Separation in Hybrid Perovskites10.1021/acs.nanolett.6b04453 ↗
40. Defect-Assisted Photoinduced Halide Segregation in Mixed-Halide Perovskite Thin Films10.1021/acsenergylett.7b00282 ↗
41. Impact of Surfaces on Photoinduced Halide Segregation in Mixed-Halide Perovskites10.1021/acsenergylett.8b01562 ↗
42. Suppressing Halide Phase Segregation in CsPbIBr 2 Films by Polymer Modification for Hysteresis-Less All-Inorganic Perovskite Solar Cells10.1021/acsami.0c20135 ↗
43. Intermediate phase-enhanced Ostwald ripening for the elimination of phase segregation in efficient inorganic CsPbIBr 2 perovskite solar cells10.1007/s40843-021-1660-6 ↗
44. Suppression of Iodide Ion Migration via Sb2S3 Interfacial Modification for Stable Inorganic Perovskite Solar Cells10.1021/acsami.9b23630 ↗
45. Strain-activated light-induced halide segregation in mixed-halide perovskite solids10.1038/s41467-020-20066-7 ↗
46. Photoinduced Self-healing of Halide Segregation in Mixed-halide Perovskites10.1021/acsenergylett.1c01040 ↗