journal article·2022-08Open access

Engineering of atomic layer deposition process for titanium-aluminum-oxide based resistively switching medium

Joonas Merisalu, Tõnis Arroval, Aarne Kasikov, Jekaterina Kozlova, Mihkel Rähn, Peeter Ritslaid, Jaan Aarik, Aile Tamm, Kaupo Kukli

Abstract

Resistive-switching Al2O3-doped TiO2 thin films with thicknesses of around 10 nm were grown by atomic layer deposition, using TiCl4 and Al(CH3)3 as the metal precursors and H2O as the oxygen source at 350 °C. A novel approach, based on the sequential pulsing of titanium and aluminum precursors, followed by a H2O pulse supplied only after the aluminum precursor pulse, was exploited to create diffuse TixAl1–xOy layers in the TiO2 host media, in order to tune the electrical properties. The films were deposited on substrates coated with conductive RuO2 to promote the epitaxial growth of rutile-phase dielectric on the RuO2 bottom electrode. Examination of the switching behavior confirmed the possibility to reduce the currents in the high resistance state, increase the difference between the high and low resistance states, and obtain multilevel resistive switching by adjusting the aluminum content and distribution in the films.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Semiconductor materials and devices · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Pathways to efficient neuromorphic computing with non-volatile memory technologies10.1063/1.5113536 ↗
2. Recent progress in solution-based metal oxide resistive switching devices Adv
3. Oxide-based RRAM materials for neuromorphic computing10.1007/s10853-018-2134-6 ↗
4. The mechanism of electroforming of metal oxide memristive switches10.1088/0957-4484/20/21/215201 ↗
5. Effect of the top electrode material on the resistive switching of TiO2 thin film10.1016/j.mee.2009.05.023 ↗
6. Resistive switching in microscale anodic titanium dioxide-based memristors10.1016/j.spmi.2017.10.031 ↗
7. Crossbar nanoscale HfO2-based electronic synapses10.1186/s11671-016-1360-6 ↗
8. Selective activation of memristive interfaces in TaOx-based devices by controlling oxygen vacancies dynamics at the nanoscale10.1088/1361-6528/ab6476 ↗
9. Electrochemically prepared oxides for resistive switching devices10.1016/j.electacta.2018.04.087 ↗
10. Role of Gd dopants on electrical properties of RF co-sputtered HfO2 thin films for resistive switching applications10.1016/j.mseb.2020.114997 ↗
11. Bipolar resistive switching properties of microcrystalline TiO2 thin films deposited by pulsed laser deposition10.1016/j.mseb.2008.12.005 ↗
12. M. Prezioso, I. Kataeva, F. Merrikh-Bayat, B. Hoskins, G. Adam, T. Sota, K. Likharev, D. Strukov, Modeling and implementation of firing-rate neuromorphic-network classifiers with bilayer Pt/Al2O3/TiO2-x/Pt memristors, in: IEEE Int. Electron Dev. Meet. (IEDM) Washington, DC, USA, 2015, pp. 17.4.1–17.4.4. https://doi.org/10.1109/IEDM.2015.7409719.10.1109/IEDM.2015.7409719 ↗
13. G.C. Adam, B.D. Hoskins, M. Prezioso, F.M. Bayat, B. Chakrabarti, D.B. Strukov Highly-uniform multi-layer ReRAM crossbar circuits, in: 46th Eur. Solid-State Device Res. Conf. (ESSDERC) Lausanne, Switzerland, 2016, pp. 436–439. https://doi.org/10.1109/ESSDERC.2016.7599679.10.1109/ESSDERC.2016.7599679 ↗
14. Electronic imitation of behavioral and psychological synaptic activities using TiOx/Al2O3-based memristor devices10.1039/C7NR04741J ↗
15. Multibit memory operation of metal-oxide bi-layer memristors10.1038/s41598-017-17785-1 ↗
16. Investigation of resistive switching and transport mechanisms of Al2O3/TiO2−x memristors under cryogenic conditions (1.5 K)10.1063/1.5140994 ↗
17. Multilevel resistive switching in TiO2/Al2O3 bilayers at low temperature10.1063/1.5019570 ↗
18. Variability improvement of TiOx/Al2O3 bilayer nonvolatile resistive switching devices by interfacial band engineering with an ultrathin Al2O3 dielectric material10.1021/acsomega.7b01211 ↗
19. Complementary switching in 3D resistive memory array10.1002/aelm.201700287 ↗
20. Resistive switching characteristics in memristors with Al2O3/TiO2 and TiO2/Al2O3 bilayers10.7567/JJAP.55.08PB02 ↗
21. A.S. Kunitsyn, N.V. Andreeva, A.A. Petrov, Bipolar resistive switching in Al2O3/TiO2 structure at low temperature, in: IEEE Conf. Russian Young Researchers in Electrical and Electronic Engineering (EIConRus), Moscow and St. Petersburg, Russia, 2018, pp. 426–430. https://doi.org/10.1109/EIConRus.2018.8317125.10.1109/EIConRus.2018.8317125 ↗
22. A.E. Sinev, N.V. Andreeva, A.A. Petrov, A.A. Bobkov, Multilevel resistive switching in heterogeneous oxide system based on TiO2/Al2O3 bilayers for ReRAM applications: Problems and prospects, in: IEEE Int. Conf. Electr. Eng. Photonics (EExPolytech), St. Petersburg, Russia, 2018, pp. 189–191. https://doi.org/10.1109/EExPolytech.2018.8564403.10.1109/EExPolytech.2018.8564403 ↗
23. Resistive switching in Pt/Al2O3/TiO2/Ru stacked structures10.1149/1.2353899 ↗
24. Effects of single-pulse Al2O3 insertion in TiO2 oxide memristors by low temperature ALD10.1007/s00339-018-2112-5 ↗
25. Interface asymmetry induced by symmetric electrodes on metal–Al:TiOx–metal structures10.1109/TNANO.2017.2777698 ↗
26. Impact of ultra-thin Al2O3-y layers on TiO2–x ReRAM switching characteristics10.1063/1.4983006 ↗
27. Epitaxial growth of high-k rutile films on RuO2 electrodes10.1116/1.3021030 ↗
28. Influence of growth temperature on structure and electrical properties of high-permittivity TiO2 films in TiCl4-H2O and TiCl4-O3 atomic layer deposition processes10.1002/pssa.201330086 ↗
29. Atomic layer deposition of rutile-phase TiO2 on RuO2 from TiCl4 and O3: growth of high-permittivity dielectrics with low leakage current10.1016/j.jcrysgro.2013.08.006 ↗
30. Influence of phase composition on optical properties of TiO2: Dependence of refractive index and band gap on formation of TiO2-II phase in thin films10.1016/j.optmat.2019.109335 ↗
31. 2007, Electrical characterization of AlxTiyOz mixtures and Al2O3–TiO2–Al2O3 nanolaminates10.1063/1.2822460 ↗
32. Al-doped TiO2 films with ultralow leakage currents for next generation DRAM capacitors10.1002/adma.200701085 ↗
33. Atomic layer deposition of high-quality Al2O3 and Al-doped TiO2 thin films from hydrogen-free precursors10.1016/j.tsf.2014.06.038 ↗
34. Growth of TixAl1−xOy films by atomic layer deposition using successive supply of metal precursors10.1016/j.tsf.2015.03.014 ↗
35. Effect of substrate-enhanced and inhibited growth on atomic layer deposition and properties of aluminum-titanium oxide films10.1016/j.tsf.2016.01.024 ↗
36. Growth of high-dielectric-constant TiO2 films in capacitors with RuO2 electrodes10.1149/1.2898184 ↗
37. Understanding the mechanisms of interfacial reactions during TiO2 layer growth on RuO2 by atomic layer deposition with O2 plasma or H2O as oxygen source10.1063/1.4960139 ↗
38. Atomic layer deposition grown metal-insulator-metal capacitors with RuO2 electrodes and Al-doped rutile TiO2 dielectric layer10.1116/1.3534023 ↗
39. Nanoscale characterization of TiO2 films grown by atomic layer deposition on RuO2 electrodes10.1021/am4049139 ↗
40. Characteristics of RuO2/TiO2/Al2O3/TiO2/RuO2 capacitors10.1149/08001.0365ecst ↗
41. Improvement of smooth surface of RuO2 bottom electrode on Al2O3 buffer layer and characteristics of RuO2/TiO2/Al2O3/TiO2/RuO2 capacitors10.1116/1.4998425 ↗
42. Study on the lattice distortion of the as-prepared nanosized TiO2 particles via detonation method10.1016/j.jpcs.2007.07.092 ↗
43. Negative differential resistance effect in ITO/TiO2/ITO based RRAM sandwich structures
44. Negative photoconductance effect: An extension function of the TiOx-based memristor10.1002/advs.202003765 ↗
45. Coexistence of negative differential resistance and resistive switching memory at room temperature in TiOx modulated by moisture10.1002/aelm.201700567 ↗
46. Refining the negative differential resistance effect in a TiOx–based memristor10.1021/acs.jpclett.1c01420 ↗
47. Electrical characterization of high- based metal-insulator-semiconductor structures with negative resistance effect when using and nanolaminated films deposited on p-Si10.1116/1.3521383 ↗
48. Improved endurance of resistive switching TiO2 thin film by hourglass shaped Magneli filaments
49. Bipolar resistive switching characteristics of HfO2/TiO2/HfO2 trilayer-structure RRAM devices on Pt and TiN-coated substrates fabricated by atomic layer deposition10.1186/s11671-017-2164-z ↗
50. Endurance and cycle-to-cycle uniformity improvement in tri-layered CeO2/Ti/CeO2 resistive switching devices by changing top electrode material10.1038/srep39539 ↗
51. Bipolar Ni/TiO2/HfO2/Ni RRAM with multilevel states and self-rectifying characteristics10.1109/LED.2013.2264823 ↗
52. Programming pulse width assessment for reliable and low-energy endurance performance in Al:HfO2-based RRAM arrays10.3390/electronics9050864 ↗
53. C.W. Hsu, I.T. Wang, C.L. Lo, M.C. Chiang, W.Y. Jang, C.H. Lin, T.H. Hou, Self-rectifying bipolar TaOx/TiO2 RRAM with superior endurance over 1012 cycles for 3D high-density storage-class memory, in: 2013 Symposium on VLSI Technology Digest of Technical Papers. https://ieeexplore.ieee.org/document/6576643.