Preparation of three-dimensional anodes for SO2 depolarized electrolyzers by growing Pt clusters on graphite felt fibers
Source abstract
Abstract
SO 2-depolarized electrolysis (SDE) is the key step of the hybrid sulfur (HyS) process, which is a promising hydrogen-producing thermochemical water splitting cycle. The conventional 2D anode limits the performance of SDE cells. In this work, 3D anodes were prepared by impregnation–reduction method, reducing H 2PtCl 6 with HCOOH under mild conditions for the direct growth of Pt particles on high void content graphite felt (GF). The SEM, XPS, and ICP-OES tests confirm that the Pt clusters are effectively loaded on the fibers of GF. The effects of H 2PtCl 6 reduction temperature and time length on the SDE performance were investigated. The 3D anode prepared by H 2PtCl 6 reduction at 65 °C for 5 h gives the highest performance to the electrolyzer, achieving current density of 1.54 A/cm 2 at 1.2 V cell voltage, 80 °C and anolyte flow rate of 360 mL/min. This performance is significantly higher than that of the conventional SDE cell applying 2D anode.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Ammonia Synthesis and Nitrogen Reduction · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. The role of hydrogen and fuel cells in the global energy system10.1039/C8EE01157E ↗
2. Energy requirements in production of hydrogen from water10.1021/i260019a025 ↗
3. The Westinghouse sulfur cycle for the thermochemical decomposition of water10.1016/0360-3199(77)90061-1 ↗
4. Advances in hydrogen production by thermochemical water decomposition: a review10.1016/j.energy.2009.06.018 ↗
5. L.E. Brecher, C.K. Wu, Electrolytic decomposition of water, 3888750, 1975, https://www.freepatentsonline.com/3888750.html (accessed January 2, 2023).
6. Sensitivity study of process parameters in membrane electrode assembly preparation and SO2 depolarized electrolysis10.1016/j.ijhydene.2012.12.120 ↗
7. Solar hydrogen production via alkaline water electrolysis10.1016/j.ijhydene.2018.11.007 ↗
8. A thermodynamic analysis of the SO2/H2SO4 system in SO2-depolarized electrolysis10.1016/j.ijhydene.2009.06.020 ↗
9. G.H. Farbman, L.E. Brecher, Hydrogen generation process. Quarterly technical progress report, May 17, 1976--August 16, 1976. [Hybrid electrolytic-thermochemical process based on electrolysis of sulfurous acid], Westinghouse Electric Corp., Pittsburgh, PA (USA). Advanced Energy Systems Div., 1976, DOI: 10.2172/7225448.10.2172/7225448 ↗
10. T.J. Steeper, J.L. Steimke, Design and experimental test plan for hybrid sulfur single cell pressurized electrolyzer, Savannah River Site (SRS), Aiken, SC, 2005, DOI: 10.2172/881426.10.2172/881426 ↗
11. Quantifying individual potential contributions of the hybrid sulfur electrolyzer10.1149/1.3397901 ↗
12. Transport properties and performance of polymer electrolyte membranes for the hybrid sulfur electrolyzer10.1149/1.3129676 ↗
13. Study on electrochemical impedance spectroscopy and cell voltage composition of a PEM SO2-depolarized electrolyzer using graphite felt as diffusion layer10.1016/j.electacta.2022.140837 ↗
14. Comparison of various structure designs of SO2-depolarized electrolysis cell10.1016/j.ijhydene.2022.11.148 ↗
15. Development and testing of a PEM SO2-depolarized electrolyzer and an operating method that prevents sulfur accumulation10.1016/j.ijhydene.2015.08.041 ↗
16. SO2-depolarized electrolysis using porous graphite felt as diffusion layer in proton exchange membrane electrolyzer10.1016/j.ijhydene.2021.10.207 ↗
17. Application of Pt loaded graphite felt in SO2-depolarized electrolyzer10.1016/j.ijhydene.2022.07.086 ↗
18. A 3D bi-functional porous N-doped carbon microtube sponge electrocatalyst for oxygen reduction and oxygen evolution reactions10.1039/C6EE02169G ↗
19. Advanced architectures and relatives of air electrodes in Zn–Air batteries10.1002/advs.201700691 ↗
20. Controlled growth of Pt nanowires on carbon nanospheres and their enhanced performance as electrocatalysts in PEM fuel cells10.1002/adma.200800491 ↗
21. Template- and surfactant-free room temperature synthesis of self-assembled 3D Pt nanoflowers from single-crystal nanowires10.1002/adma.200701408 ↗
22. Growing Pt nanowires as a densely packed array on metal gauze10.1021/ja074312e ↗
23. Halide-regulated growth of electrocatalytic metal nanoparticles directly onto a carbon paper electrode10.1039/C6TA08288B ↗
24. A facile route for polymer electrolyte membrane fuel cell electrodes with in situ grown Pt nanowires10.1016/j.jpowsour.2009.06.091 ↗
25. Oxidative modification of graphite felts for efficient H2O2 electrogeneration: Enhancement mechanism and long-term stability10.1016/j.jelechem.2018.11.051 ↗
26. Graphite felt electrochemically modified in H2SO4 solution used as a cathode to produce H2O2 for pre-oxidation of drinking water10.1016/j.cej.2014.03.043 ↗
27. Three-dimensional annealed WO3 nanowire/graphene foam as an electrocatalytic material for all vanadium redox flow batteries10.1039/C7SE00271H ↗
28. An XPS study on oxidation states of Pt and its alloys with Co and Cr and its relevance to electroreduction of oxygen10.1016/S0169-4332(00)00831-X ↗
29. Synthesis and characterization of carbon-supported Pt–Ru–WOx catalysts by spectroscopic and diffraction methods10.1023/A:1017585901064 ↗
30. Ru@Pt/C core-shell catalyst for SO2 electrocatalytic oxidation in electrochemical Bunsen reaction10.1016/j.electacta.2019.135315 ↗
31. Atomically dispersed supported metal catalysts10.1146/annurev-chembioeng-062011-080939 ↗
32. Synthesis of bifunctional catalysts for metal-air batteries through direct deposition methods10.1002/batt.201800069 ↗