Investigation on intermediate band formation and photoresponsivity enhancement of spray deposited Sn doped CuGaS2 (CuGa1-xSnxS2) thin films
Source abstract
Abstract
The intermediate band in CuGa 1-XSn XS 2 chalcopyrite has been explored through both theoretical and experimental approaches. Structural and electronic properties of pristine and Sn-doped CuGaS 2 were analyzed using density functional theory (DFT) and various characterization techniques, including PXRD, SEM with EDS, XPS, UV–Vis-NIR spectroscopy, and Hall measurements. The films exhibited a polycrystalline tetragonal structure with sprouts and tiny rod-like particles on the surface, as observed from the SEM analysis. EDS results confirmed the uniform distribution of elements in the films, matching the intended doping composition. XPS analysis confirmed the valence state of Sn, indicating Sn 4+ as the dominant oxidation state in the doped films. Sn doping reduced the optical bandgap from 2.53 eV to 2.50 eV, and an intermediate band was observed between 1.04 eV and 0.87 eV. The 0.02 at.% Sn-doped CGS films demonstrated the lowest resistivity (2.23 × 10 −3 Ω·cm) and highest carrier concentration (9.13 × 10 21 cm −3), showing enhanced photoresponsivity (0.173 AW −1 compared to 0.08 AW −1 for pristine CGS). The results indicate that Sn-doping successfully introduces an intermediate band without significantly altering the crystal structure or material integrity. The 0.02 at.% Sn-doped CGS (CuGa 0.98Sn 0.02S 2) material emerges as a promising candidate for intermediate band solar cells, offering improved electrical and optical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Evaluation of the efficiency potential of intermediate band solar cells based on thin-film chalcopyrite materials10.1063/1.2901213 ↗
2. Preparation of Sn-doped CuAlS2 films with an intermediate band and wide-spectrum solar response10.1039/C6RA00946H ↗
3. Electrodeposition of CuGaSe2 and CuGaS2 thin films for photovoltaic applications10.1007/s10008-016-3237-0 ↗
4. Synthesis and characterization of CuInGaS2 nano-ink for photovoltaic applications10.1080/17458080.2012.679627 ↗
5. Synthesis and characterization of CuAlS2 nanoparticles by mechanical milling
6. Solar cells based on CuInS2-an overview10.1016/j.tsf.2004.11.042 ↗
7. Status review and the future prospects of CZTS based solar cell – A novel approach on the device structure and material modeling for CZTS based photovoltaic device10.1016/j.rser.2018.06.008 ↗
8. Intermediate band position modulated by Zn addition in Ti doped CuGaS210.1016/j.tsf.2010.12.136 ↗
9. First-principles analysis of the intermediate band in CuGa1-xFexS210.1103/PhysRevB.93.165204 ↗
10. Facile synthesis and assembly of Cu2S Nanodisks to Corncoblike nanostructures10.1021/cm0617135 ↗
11. The Intermediate band solar cell: progress towards the realization of an attractive concept10.1002/adma.200902388 ↗
12. Electrodeposition of Cu-Ga precursor layer for CuGaS2 solar energy thin film from alcohol solution10.1007/s11581-016-1888-6 ↗
13. The investigation of transition metal doped CuGaS2 for promising intermediate band materials10.1039/C4RA10007G ↗
14. Tailoring sub-bandgap of CuGaS2 thin film via chromium doping by facile chemical spray pyrolysis technique10.1007/s10854-018-0065-2 ↗
15. Thermodynamics of the formation of Ti- and Cr-doped CuGaS 2 intermediate-band photovoltaic materials10.1021/jp0774185 ↗
16. Ideal half-filled intermediate band position in CuGaS2 generated by Sb related defect complex: a first-principles study10.7567/1882-0786/aafa0d ↗
17. Site preference for Mn substitution in spintronic CuMIIIXVI2 chalcopyrite semiconductors10.1103/PhysRevB.69.075208 ↗
18. Mn-doped (formula presented) chalcopyrites: an ab initio study of ferromagnetic semiconductors10.1103/PhysRevB.66.205206 ↗
19. Analysis of the electronic structures of 3d transition metals doped CuGaS2 based on DFT calculations10.1088/1674-4926/35/1/013002 ↗
20. Optical properties of a magnetic semiconductor: chalcopyrite CuFeS2.: I. Absorption spectra of CuFeS2 and Fe-doped CuAlS2 and CuGaS210.1143/JPSJ.36.1618 ↗
21. Schock, Investigation of the Sub-bandgap photoresponse in CuGaS2: fe for intermediate band solar cells10.1002/pip.1197 ↗
22. Engineering of sub-band in CuGaS2 thin films via Mo doping by chemical spray pyrolysis route10.1016/j.tsf.2020.138252 ↗
23. Structural and optical characteristics of Sn-doped CuGaSe2 thin films as a new intermediate band material for high-efficiency solar cells10.1063/5.0007594 ↗
24. Observation of an Intermediate Band in Sn-doped Chalcopyrites with Wide-spectrum Solar Response10.1038/srep01286 ↗
25. Investigation of a Novel Intermediate Band Photovoltaic Material with Wide Spectrum Solar Absorption Based on Ti-Substituted CuGaS210.1016/j.solener.2014.02.046 ↗
26. Possible impurity-induced ferromagnetism inII−Ge−V2chalcopyrite semiconductors10.1103/PhysRevB.65.094415 ↗
27. V.G. Rajeshmon, C.S .Kartha, K.P. Vijayakumar, C. Sanjeeviraja, T.Abe, Solar Energy, Role of precursor solution in controlling the opto-electronic properties of spray pyrolysed Cu2ZnSnS4 thin films, 85 (2011) 249–255, doi: 10.1016/j.solener.2010.12.005.10.1016/j.solener.2010.12.005 ↗
28. Structural and dielectric properties of sintering zinc oxide bulk ceramic
29. Effect of structural distortion and nature of bonding on the electronic properties of defect and Li-substituted CuInSe2 chalcopyrite semiconductors10.1016/j.jallcom.2011.08.040 ↗
30. Fe-substituted indium thiospinels: new intermediate band semiconductors with better absorption of solar energy10.1063/1.4808352 ↗
31. Theoretical modelling of intermediate band solar cell materials based on metal-doped chalcopyrite compounds10.1016/j.tsf.2006.12.170 ↗
32. Preparation and characterization of CuInSe2 thin films by chemical bath deposition technique10.1016/j.jallcom.2010.03.215 ↗
33. First-principles study of the band structure and optical absorption of CuGaS210.1103/PhysRevB.84.085145 ↗
34. Electronic and optical properties of single crystal SnS2: an earth-abundant disulfide photocatalyst10.1039/C5TA08214E ↗
35. XPS analysis and structural characterization of CZTS thin films prepared using solution and vacuum based deposition techniques
36. Fabrication of single crystalCuGaS2nanorods by X-ray irradiation10.1039/c3nr00264k ↗
37. Solution based synthesis and characterization of Cu2ZnSnS4 nanocrystals10.1021/ja9044168 ↗
38. Cu2ZnSnS4 hierarchical microspheres as an effective counter electrode material for quantum dot sensitized solar cells10.1021/jp306628m ↗
39. Chemical spray pyrolysis deposition of transparent and conducting Fe doped CdO thin films for ethanol sensor10.1016/j.mssp.2015.07.090 ↗
40. Low-temperature synthesis of Cu2CoSnS4 nanoparticles by thermal decomposition of metal precursors and the study of its structural, optical and electrical properties for photovoltaic applications10.1039/C5RA18679J ↗
41. Controlling the morphology of ZnO structures via low temperature hydrothermal method and their optoelectronic application10.1016/j.mssp.2018.09.007 ↗
42. Fabrication of visible light photo detector using co-evaporated Cu2SnS3 thin films
43. Investigation on visible spectral response of spray coated Ni doped CuGaS2 thin films for photo detector application10.1016/j.optmat.2023.114559 ↗
44. A novel approach for designing a sub-bandgap in CuGa (S, Te) 2 thin films assisted with numerical simulation of solar cell devices for photovoltaic application10.1021/acsomega.2c08196 ↗
45. Hierarchically structured sub-bands in chalcopyrite thin-film solar cell devices10.1039/D3NJ03894G ↗
46. High-performance dual-mode ultra-thin broadband CdS/CIGS heterojunction photodetector on steel10.1364/OE.456352 ↗
47. Enhancement of the response speed of CIGS-based photodetector by Te-doping10.1016/j.sna.2024.115691 ↗
48. High-responsivity broadband photodetection of an ultra-thin In2S3/CIGS heterojunction on steel10.1364/OL.423999 ↗
49. Significantly enhanced detectivity of CIGS broadband high-speed photodetectors by grain size control and ALD-Al2O3 interfacial-layer modification10.1021/acsami.9b04248 ↗