journal article·2025-03

Investigation of high-performance Cu-oxide/black TiO2; heterojunction photocatalytic fabricated by pulsed anodization on the Cu-foam

K. Mohammadi, S.G. Shabestari, M. Divandari

Publisher page

Abstract

Cu-foam has been modified to perform as a 3D heterojunction Cu-oxide /black TiO 2 photocatalyst due to its high surface area in the filtration of color wastewater and antibacterial properties. Cu-oxide is fabricated by a novel anodizing method with a pulsed current directly on the Cu-foam in the NaOH electrolyte. A sol spinning coat and calcination conduct the black TiO 2 part of the photocatalyst under an argon atmosphere. The degradation by methylene blue (MB) and antibacterial tests was used to evaluate the prepared samples’ photocatalytic activity. The surface topography, phase, and element composition of the Cu-oxide/black TiO 2 coatings were characterized by scanning electron microscopy (SEM), (FE-SEM), grazing X-ray diffraction (XRD), Fourier transform infrared (TIR), and BET. Results revealed that the pulsed current anodizing of Cu-foam and sol–gel calcined under argon flow leads to the formation of Cu 2O with octahedral microstructure and black TiO 2. The ability to decompose 79.93 % of methylene blue during 60 min, antibacterial activity equal to 99.89 % for E-coli bacteria, and an energy gap of 2 eV for the sample made of octahedral oxides of Cu 2O and blackTiO 2 indicate more energy absorption and excellent photocatalytic ability in this 3D heterojunction photocatalyst.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Investigation on the flow limitation during copper electroplating of polyurethane foam10.1016/j.jmrt.2021.07.070 ↗
2. Novel nanocomposite materials for advanced Li-ion rechargeable batteries10.3390/ma2031205 ↗
3. Electrodeposition of copper oxides (CuxOy) from acetate bath10.1016/j.jelechem.2018.03.055 ↗
4. Ultrafast fabrication of Cu oxide micro/nanostructures via laser ablation to promote oxygen evolution reaction10.1016/j.cej.2019.123086 ↗
5. Hierarchically porous micro/nanostructured copper surfaces with enhanced antireflection and hydrophobicity10.1016/j.apsusc.2015.10.217 ↗
6. A new sintering method for fabrication of open-cell metal foam parts10.1080/10426914.2020.1784933 ↗
7. Photoelectrochemical decomposition of VOCs on an anodized TiO2 plate
8. Photocatalytic activity of ZnO/RGO composite synthesized by one-pot solution combustion method10.1016/j.materresbull.2019.03.024 ↗
9. Single-phase Gd0.2La0.2Ce0.2Hf0.2Zr0.2O2 and Gd0.2La0.2Y0.2Hf0.2Zr0.2O2 nanoparticles as efficient photocatalysts for the reduction of Cr(VI) and degradation of methylene blue dye10.1016/j.jallcom.2020.156716 ↗
10. Photocatalytic hydrogen production on the heterojunction CuO/ZnO10.1016/j.ijhydene.2020.11.053 ↗
11. Preparation and performance of Cu2O/TiO2 nanocomposite thin film and photocatalytic degradation of Rhodamine B10.2166/wst.2018.369 ↗
12. One-pot synthesis of Cu–TiO2/CuO nanocomposite: application to photocatalysis for enhanced H2 production, dye degradation & detoxification of Cr (VI)10.1016/j.ijhydene.2019.10.081 ↗
13. g-C3N4 foam/Cu2O QDs with excellent CO2 adsorption and synergistic catalytic effect for photocatalytic CO2 reduction10.1016/j.envint.2019.06.008 ↗
14. Novel g-C3N4/BiIO4 heterojunction photocatalysts: synthesis, characterization and enhanced visible-light-responsive photocatalytic activity10.1039/C4RA05917D ↗
15. Photoelectrochemical properties of morphology controlled manganese, iron, nickel and copper oxides nanoball thin films deposited by electric field directed aerosol assisted chemical vapor deposition10.1016/j.mtcomm.2015.06.004 ↗
16. A low overpotential photoelectrochemical reduction of carbon dioxide to methanol with highly photoactive hierarchical structured cuprous oxide10.1016/j.ceramint.2020.07.091 ↗
17. Y. S. K. Jin You Zheng, Abhijit P. Jadhav, Guang Song, Chang Woo Kim, “ Cu Cu2O films with semi-spherical particles grown by electrochemical deposition,” Thin Solid Films, vol. 524, pp. 50–56, 2012, doi: 10.1016/j.tsf.2012.09.045.10.1016/j.tsf.2012.09.045 ↗
18. Microstructure and optical properties of black TiO2 nanorods10.1016/j.physb.2019.411670 ↗
19. Enhanced photoelectrochemical properties of hierarchical black TiO2-x nanolaces for Cr (VI) photocatalytic reduction10.1016/j.ijhydene.2020.06.078 ↗
20. Black TiO2: a review of its properties and conflicting trends10.1016/j.cej.2019.123918 ↗
21. Graphene modified “black {0 0 1}TiO2” nanosheets for photocatalytic oxidation of ethylene: The implications of chemical surface characteristics in the reaction mechanism
22. Black-TiO2 based photoelectrochemical oxidation of flue- gas desulfurization wastewater for effective reuse in flow-electrode CDI10.1016/j.desal.2022.115899 ↗
23. Control of Cu2O film morphology using potentiostatic pulsed electrodeposition10.1016/j.electacta.2016.07.116 ↗
24. Effect of sol composition on the properties of TiO2 powders obtained by the sol-gel method10.1016/j.powtec.2021.04.037 ↗
25. Anneal-shrinked Cu2O dendrites grown on porous Cu foam as a robust interface for high-performance nonenzymatic glucose sensing10.1016/j.talanta.2016.09.024 ↗
26. “ X-pert HighScore,” PANalaytical B. V. Almelo, Netherland, 2003.
27. Effect of annealing on the electrodeposited Cu2O films for photoelectrochemical hydrogen generation10.1016/j.tsf.2010.04.073 ↗
28. Designated-tailoring on {100} facets of Cu2O nanostructures: from octahedral to its different truncated forms10.1155/2010/710584 ↗
29. Bifunctional Cu2S–Co(OH)2 nanotube array/Cu foam electrocatalyst for overall water splitting10.1016/j.electacta.2019.05.118 ↗
30. Surface texture in electrodeposited films of cuprous oxide10.1007/BF01106802 ↗
31. Truncated concave octahedral Cu2O nanocrystals with {: Hkk } high-index facets for enhanced activity and stability in heterogeneous catalytic azide-alkyne cycloaddition10.1039/C7GC03020G ↗
32. Z. A. Che Ramli, N. Asim, W. Isahak, Z. Emdadi, N. Ahmad-Ludin, M. Ambar Yarmo, K. Sopian “ Photocatalytic Degradation of Methylene Blue under UV Light Irradiation on Prepared Carbonaceous,” The Scientific World Journal, vol. 2014, pp. 1–8, 2014, [Online]. Available: http://www.hindawi.com/journals/tswj/2014/415136/.10.1155/2014/415136 ↗
33. Synthesis, characterization, and antibacterial activity of polyindole/Ag–Cuo nanocomposites by reflux condensation method10.1080/03602559.2017.1410832 ↗
34. Photocatalytic degradation of textile dyes on Cu2O-CuO/TiO2 anatase powders
35. Structural and optical properties of sol–gel derived CuO and Cu2O nanoparticles10.1016/j.matpr.2020.08.800 ↗
36. Photocatalytic degradation of methylene blue by TiO2 film and Au particles-TiO2 composite film10.1016/j.tsf.2007.10.050 ↗
37. Analysis of the degradation mechanism of methylene blue by atmospheric pressure dielectric barrier discharge plasma10.1016/j.cej.2010.05.041 ↗
38. Plasmonic photocatalysts consisting of a mixture of Au nanospheres and Au nanorods on TiO2 support for improved visible light induced photocatalytic degradation properties10.1016/j.jphotochem.2020.112740 ↗
39. Photocatalytic degradation of methylene blue dye using ultraviolet light-emitting diodes10.1021/ie9012437 ↗
40. Z.Wenling, L. Chngchng,“Mesoporous Cu–Cu2O@TiO2 heterojunction photocatalysts derived from metal-organic frameworks”, RSC Adv., vol 10, pp14550, 2020, doi: 10.1039/d0ra01327g.10.1039/D0RA01327G ↗
41. Design and preparation of heterostructured Cu2O/TiO2 materials for photocatalytic applications10.3390/molecules29215028 ↗
42. Synthesis and photocatalytic performance of three-dimensional flower-like bismuth tungstate: influence of hydrothermal temperature10.1016/j.matlet.2022.131892 ↗
43. Synthesis of Ag@AgCl modified anatase/rutile/brookite mixed phase TiO2 and their photocatalytic property10.1515/ntrev-2022-0483 ↗
44. “Preparation and characterization of Cu-doped TiO2 nanomaterials with anatase/rutile/brookite triphasic structure and their photocatalytic activity”
45. Relationship between surface properties and antibacterial behavior of wire arc spray copper coatings10.1016/j.surfcoat.2013.01.060 ↗
46. T.Ghrib, N ALSaleem, A. ALNaghmaish, A. Elshekhipy, S. Brini, K. Briki, K. Elsayed, “Annealing effect on the microstructural, optical, electrical, and thermal properties of Cu2O/TiO2/Cu2O/TiO2/Si heterojunction prepared by sol-gel technique”, Micro and Nanostructures Vol 164, pp. 107119-107129, 2022, doi: org/10.1016/j.spmi.2021.107119.10.1016/j.spmi.2021.107119 ↗
47. Study of Cu2O particle morphology on microwave field enhancement10.1016/j.matchemphys.2018.05.059 ↗
48. TiO2 photocatalysis: a historical overview and future prospect10.1143/JJAP.44.8269 ↗