Microstructure, thermal stability and soft magnetic properties of Fe81B10P8Cu1 amorphous/nanocrystalline alloy refined by slags with low basicity
Source abstract
Abstract
The amorphous/nanocrystalline duplex structure is stable and exhibits excellent soft magnetic properties. However, the presence of impurities inevitably impacts the performance of the products. In this work, the impact of refining slags with various basicities ( R=1, 0.66, 0.5, 0.4) on the microstructure, thermal stability, and soft magnetic properties of Fe 81B 10P 8Cu 1 alloy was investigated by varying the composition ratio x:1:1 ( x = 2, 3, 4, & 5) of B 2O 3:MnO:MgO. The utilization of refining slag with low basicity is beneficial for removing impurity, enhancing magnetic exchange interactions and reducing magnetic anisotropy in amorphous alloy, thereby improving its soft magnetic properties. Notably, when the refining slag composition of B 2O 3:MnO:MgO is 4:1:1, the Fe 81B 10P 8Cu 1 nanocrystalline alloy exhibits exceptional soft magnetic properties and the smallest grain size, with a B s of 1.717 T, H c of 3.85 A/m and an average grain size of 23.84 nm. These findings are significant for enhancing the performance of Fe-based nanocrystalline alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Functional biomass-derived materials for the development of sustainable batteries10.1002/celc.202400086 ↗
2. Modulation engineering of electromagnetic wave absorption performance of layered double hydroxides derived hollow metal carbides integrating corrosion protection
3. Molecular intercalation-induced two-phase evolution engineering of 1T and 2H-MS2 (M = Mo, V, W) for interface-polarization-enhanced electromagnetic absorbers
4. Perspectives of nitrogen-doped carbons for electromagnetic wave absorption10.1016/j.carbon.2024.118925 ↗
5. Multi-level hollow sphere rich in heterojunctions with dual function: efficient microwave absorption and antiseptic10.1016/j.jmst.2024.01.004 ↗
6. New Fe-based soft magnetic alloys composed of ultrafine grain structure10.1063/1.342149 ↗
7. Modern soft magnets: amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗
8. Evolution from amorphous to nanocrystalline and corresponding magnetic properties of Fe-Si-B-Cu-Nb alloys by melt spinning and spark plasma sintering10.1016/j.mseb.2014.04.005 ↗
9. Fe–B–P–Cu nanocrystalline soft magnetic alloys with high Bs10.1016/j.jallcom.2010.12.104 ↗
10. Low core loss of non-Si quaternary Fe83.3B8P8Cu0.7 nanocrystalline alloy with high Bs of 1.7 T10.1063/1.3679467 ↗
11. New Fe-metalloids based nanocrystalline alloys with high Bs of 1.9 T and excellent magnetic softness10.1063/1.3058624 ↗
12. High Bs of FePBCCu nanocrystalline alloys with excellent soft-magnetic properties10.1016/j.jnoncrysol.2019.119800 ↗
13. Novel Fe-C-B-P-Cu nanocrystalline alloys with superb magnetic properties and processability10.1016/j.jmmm.2021.167915 ↗
14. Purifying Fe-based amorphous alloys to enhance glass-forming ability by designing a novel refining slag10.1016/j.jmst.2022.09.032 ↗
15. Evolution and removal of inclusions in Fe-based amorphous alloys10.1007/s11661-022-06749-4 ↗
16. Evolution and control of nonmetallic inclusions in FeSiB alloy10.1007/s42243-020-00381-5 ↗
17. Fluxing purification and its effect on magnetic properties of high-Bs FeBPSiC amorphous alloy10.1016/j.jmmm.2017.02.052 ↗
18. High Bs Fe-based nanocrystalline alloy with high impurity tolerance10.1007/s10853-017-1557-9 ↗
19. Oxygen-driven impurities scavenging before solidification of Fe-based metallic glasses10.1016/j.jallcom.2018.09.242 ↗
20. Bulk ferromagnetic glasses in the Fe-Ni-P-B system10.1016/S1359-6454(00)00365-7 ↗
21. Large bulk soft magnetic [(Fe0.5Co0.5)0.75B0.2Si0.05]96Nb4 glassy alloy prepared by B2O3 flux melting and water quenching10.1063/1.2201900 ↗
22. Constant permeability of (Fe0.75B0.20Si0.05)96Nb4 bulk metallic glass prepared by B2O3 flux melting and Cu-mold casting10.1063/1.3068485 ↗
23. Fluxing induced boron alloying in Fe-based bulk metallic glasses10.1016/j.matdes.2017.05.020 ↗
24. Evading the refining-induced trade-off between performance enhancement and alloy composition deviation in Fe-based amorphous alloys10.1016/j.jmrt.2023.11.114 ↗
25. Effect of fluxing treatment on the amorphous forming ability and magnetic properties of FeBP alloy10.1016/j.jmmm.2021.167825 ↗
26. Control of non-metallic inclusion plasticity and steel cleanliness for ultrathin 18 Pct Cr-8 Pct Ni stainless steel strip10.1007/s11663-020-01862-4 ↗
27. A laboratory investigation of the phosphorus reaction in the basic steelmaking process
28. Surface crystallization suppressed mechanism and enhanced magnetic softness of FeCuSiBNb alloys with the ultralow Dy content10.1016/j.apsusc.2022.154320 ↗
29. Thermal and magnetic properties of Fe(Co)BCCu amorphous alloys with high saturation magnetization of 1.77 T10.1016/j.jallcom.2020.157071 ↗
30. Effects of Nb microalloying on the magnetic properties and microstructure of Fe-Si-B-P-Cu-Nb nanocrystalline alloys prepared with pure and industrial raw materials10.1016/j.jallcom.2022.167886 ↗
31. Ultra-low cost and energy-efficient production of FePCSi amorphous alloys with pretreated molten iron from a blast furnace10.1016/j.jnoncrysol.2019.03.045 ↗
32. Effect of industrial raw materials on the glass-forming ability, magnetic and mechanical properties of Fe-based bulk metallic glasses10.1007/s11663-015-0436-5 ↗
33. Enhanced glass-forming ability of FeCoBSiNb bulk glassy alloys prepared using commercial raw materials through the optimization of Nb content10.1063/1.3350898 ↗
34. Enhanced glass-forming ability of Fe-based bulk metallic glasses prepared using hot metal and commercial raw materials through the optimization of Mo content10.1016/j.scriptamat.2007.02.038 ↗
35. Design of FeSiBPCu soft magnetic alloys with good amorphous forming ability and ultra-wide crystallization window10.1016/j.jmst.2022.11.019 ↗
36. Effects of metalloid B addition on the glass formation, magnetic and mechanical properties of FePCB bulk metallic glasses10.1016/j.jmst.2014.10.009 ↗
37. Fe-based amorphous soft magnetic alloys with high saturation magnetization and good bending ductility10.1016/j.jallcom.2014.06.093 ↗
38. Development of quaternary Fe-based bulk metallic glasses with high saturation magnetization above 1.6T10.1016/j.jnoncrysol.2012.03.023 ↗
39. A short-range ordering in soft magnetic Fe-based metallic glasses studied by Mössbauer spectroscopy and Reverse Monte Carlo method10.1016/j.jmmm.2015.12.068 ↗
40. Hyperfine interactions in nanocrystallized NANOPERM-type metallic glass containing Mo10.1007/s10751-016-1345-y ↗
41. Evolution of structural and magnetic properties of the FeCuBP amorphous alloy during annealing10.1016/j.jallcom.2017.06.147 ↗
42. Fe-P based nanocrystalline alloys with good soft-magnetic properties via Nb microalloying10.1016/j.jnoncrysol.2022.121990 ↗
43. Roles of Cu in Fe-based soft magnetic nanocrystalline alloys with high Fe content10.1016/j.intermet.2024.108202 ↗
44. High Bs nanocrystalline Fe84−x−yCuxNbySi4B12 alloys (x=0.0-1.4, y=0.0-2.5)10.1016/j.jmmm.2009.01.018 ↗
45. Random anisotropy in amorphous ferromagnets10.1063/1.324881 ↗
46. Effect of surface crystallization on magnetic properties of Fe82Cu1Si4B11.5Nb1.5 nanocrystalline alloy ribbons10.1016/j.jmmm.2017.04.086 ↗
47. Effect of heating rate on atom migration, phase structure and magnetic properties of the Fe82Si2B11P4Cu1 alloy10.1016/j.jnoncrysol.2018.07.051 ↗
48. Cu clustering and Si partitioning in the early crystallization stage of an Fe73.5Si13.5B9Nb3Cu1 amorphous alloy10.1016/S1359-6454(98)00392-9 ↗