Low-temperature curable permalloy-based soft magnetic composites for megahertz applications
Source abstract
Abstract
This paper proposed low-temperature curable soft magnetic composites (SMCs) cores that consisted of permalloy powders and acrylic polymer (Trimethylpropane triacrylate, or TMPTA) for high-frequency applications. The effect of TMPTA content, compaction pressure and curing temperature on the magnetic properties of synthesized cores were investigated. The coated TMPTA insulating layer can effectively increase the electrical resistivity of the core and thereby improve the frequency characteristics. The magnetic performance of cores depends on the distribution and actual content of the TMPTA after pressing although the polymer content in the mixture is increased from 2 wt% to 6 wt%. As the compaction pressure increases from 100 MPa to 400 MPa, the relative permeability of the core increases but its imaginary part of the permeability has almost no change until 10 MHz. The increased curing temperature can increase the initial permeability of the cores but deteriorates the frequency stability and greatly increase the imaginary part of the permeability. It was noted that the core with 5 % TMPTA content, compacted at 400 MPa and cured at 200 °C has the best frequency stability, the lowest imaginary part of the permeability and acceptable real permeability over 30. It is beneficial for high frequency operation of power electronics.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Antenna and Metasurface Technologies · Aerogels and thermal insulation · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. A 10-MHz Resonant Converter With a Synchronous Rectifier for Low-Voltage Applications10.1109/TPEL.2018.2850300 ↗
2. Properties of iron-based soft magnetic composite with iron phosphate-silane insulation coating10.1016/j.jallcom.2009.03.074 ↗
3. New Fe-based amorphous soft magnetic composites with significant enhancement of magnetic properties by compositing with nano-(NiZn)Fe2O410.1016/j.jallcom.2016.11.241 ↗
4. Magnetic properties of hybrid-soft magnetic composites10.1016/j.mseb.2009.02.005 ↗
5. Oxidation fabrication and enhanced soft magnetic properties for core-shell FeCo/CoFe2O4 micron-nano composites10.1016/j.matdes.2017.02.073 ↗
6. Effects of annealing on the magnetic properties of Fe-based amorphous powder cores with inorganic-organic hybrid insulating layer10.1016/j.jmmm.2019.165827 ↗
7. Influence of resin type and content on electrical and magnetic properties of soft magnetic composites (SMCs)10.1016/j.powtec.2013.01.006 ↗
8. Hybrid amorphous soft magnetic composites with ultrafine FeSiBCr and submicron FeBP particles for MHz frequency power applications10.1016/j.jmmm.2022.169365 ↗
9. Magnetic property regulation and mechanism analysis of FeSiBC soft magnetic composites by mixing with FeSiCr or carbonyl iron powder10.1016/j.jmmm.2023.171413 ↗
10. Effect of annealing treatment on the magnetic properties with wide temperature range of Co-doped FeSi soft magnetic composites10.1016/j.jmmm.2022.170343 ↗
11. Evolution of phosphate coatings during high-temperature annealing and its influence on the Fe and FeSiAl soft magnetic composites10.1016/j.jallcom.2015.04.201 ↗
12. Liu · 2002 · 104
13. A planar inductor using Mn-Zn ferrite/polyimide composite thick film for low-Voltage and large-current DC-DC converter10.1109/TMAG.2005.855164 ↗
14. Surface-Oxidized Amorphous Alloy Powder/Epoxy-Resin Composite Bulk Magnetic Core and Its Application to Megahertz Switching LLC Resonant Converter10.1109/TMAG.2017.2718042 ↗
15. Study on the Electric Performances of Planar Inductor With Fe-System Magnetic Flake Composite Integrated for SiP DC-to-DC Converter Applications10.1109/TMAG.2015.2452902 ↗
16. Improving high-frequency properties via selectable diameter of amorphous-ferroalloy particle10.1016/j.mseb.2014.02.002 ↗
17. Multi-component soft magnetic alloy FeNiCoAl0.4Mo0.1Si0.4B0.1 with high frequency stability of permeability10.1016/j.mseb.2023.116485 ↗
18. The excess loss analysis of an easy-plane FeSiAl@SiO2 soft magnetic composite with high permeability10.1016/j.jmmm.2023.171471 ↗
19. Over 100 MHz cut-off frequency mechanism of Fe-Si soft magnetic composites10.1016/j.jmmm.2022.169366 ↗
20. Highly improved middle to higher frequency magnetic performance of Fe-based soft magnetic composites with insulating Co2Z hexaferrites10.1016/j.jmmm.2021.168297 ↗
21. FeSiCr soft magnetic composites with significant improvement of high-frequency magnetic properties by compositing nano-YIG ferrite insulating layer10.1016/j.ceramint.2023.05.277 ↗
22. Improved permeability and decreased core loss of iron-based soft magnetic composites with YIG ferrite insulating layer10.1016/j.jallcom.2022.168285 ↗
23. FeSiCrB amorphous soft magnetic composites filled with Co2Z hexaferrites for enhanced effective permeability10.1016/j.apt.2021.11.030 ↗
24. Synthesis of FeNi@kaolin soft magnetic composites with adjustable magnetic properties under different DC bias fields10.1016/j.jmmm.2023.171350 ↗
25. Comparative investigation of insulation techniques based on APTES for different structures and magnetic properties of soft magnetic composites10.1016/j.jmmm.2023.170571 ↗
26. Magnetic properties of iron-based soft magnetic composites prepared via phytic acid surface treatment10.1016/j.ceramint.2020.11.245 ↗
27. Electric insulation of a FeSiBC soft magnetic amorphous powder by a wet chemical method: Identification of the oxide layer and its thickness control10.1016/j.actamat.2010.06.044 ↗
28. Process optimization and magnetic properties of soft magnetic composite cores based on phosphated and mixed resin coated Fe powders10.1016/j.jmmm.2020.166455 ↗
29. Microstructure, formation mechanism and magnetic properties of Fe1.82Si0.18@Al2O3 soft magnetic composites10.1016/j.jmmm.2019.165744 ↗
30. Magnetic properties of Fe soft magnetic composites with a double-insulating layer comprising Fe3O4 and silicone resin10.1016/j.jallcom.2022.168255 ↗
31. Effect of annealing on magnetic properties of Fe/Fe3O4 soft magnetic composites prepared by in-situ oxidation and hydrogen reduction methods10.1016/j.jallcom.2018.11.184 ↗
32. Enhancement of the magnetic properties of Fe-Si-Cr soft magnetic composite by selective oxidation annealing10.1016/j.jmmm.2022.169697 ↗
33. Preparation and magnetic properties of FeSiAl-based soft magnetic composites with MnO/Al2O3 insulation layer10.1016/j.jmmm.2019.166084 ↗
34. Microstructure and Magnetic Properties of Fe/ZrSiO4 Composites Prepared by Mechanical Milling and Spark Plasma Sintering10.1109/TMAG.2019.2938150 ↗
35. Al2O3 “self-coated” iron powder composites via mechanical milling10.1016/j.jallcom.2015.08.260 ↗
36. Structural studies, magnetic properties and loss separation in iron-phenolicsilane soft magnetic composites10.1016/j.matdes.2009.06.044 ↗
37. Design of novel soft magnetic composites based on Fe/resin modified with silica10.1016/j.matlet.2013.03.067 ↗
38. Fabrication of Fe-Si-B based amorphous powder cores by cold pressing and their magnetic properties10.1016/j.msea.2006.02.394 ↗
39. The correlations between processing parameters and magnetic properties of an iron-resin soft magnetic composite10.1016/j.jmmm.2005.12.004 ↗
40. Fabrication and properties of iron-based soft magnetic composites coated with parylene via chemical vapor deposition polymerization10.1016/j.matchemphys.2015.01.026 ↗
41. A comparison of soft magnetic composites designed from different ferromagnetic powders and phenolic resins10.1016/j.cjche.2014.12.005 ↗
42. Magnetic properties of iron-based soft magnetic composites prepared by utilizing polyimide insulating layer10.1016/j.jmmm.2019.165287 ↗
43. Low Parasitic-Inductance Packaging of a 650 V/150 A Half-Bridge Module Using Enhancement-Mode Gallium-Nitride High Electron Mobility Transistors10.1109/TIE.2022.3148750 ↗
44. GaN-Based Isolated Resonant Converter as a Backup Power Supply in Automotive Subnets10.1109/TPEL.2023.3245561 ↗
45. Threshold Voltage Instability Measurement Circuit for Power GaN HEMTs Devices10.1109/TPEL.2023.3247569 ↗
46. Gallium Nitride Versus Silicon Carbide: Beyond the Switching Power Supply10.1109/JPROC.2023.3254279 ↗
47. A Suppression Method for Gate-Source Voltage Oscillation With Clamping Function for GaN Devices10.1109/TPEL.2022.3213440 ↗
48. Stability, Reliability, and Robustness of GaN Power Devices: A Review10.1109/TPEL.2023.3266365 ↗
49. Structure and magnetic properties of iron-based soft magnetic composite with Ni-Cu-Zn ferrite-silicone insulation coating10.1016/j.jmmm.2018.02.033 ↗
50. Permeability of soft magnetic composites from flakes of nanocrystalline ribbon10.1109/TMAG.2002.802419 ↗
51. Effects of compaction and heat treatment on the soft magnetic properties of iron-based soft magnetic composites10.1088/2053-1591/ab6acc ↗
52. Enhancing the Properties of FeSiBCr Amorphous Soft Magnetic Composites by Annealing Treatments10.3390/met12050828 ↗
53. Effect of heat treatment on magnetic properties of iron-based soft magnetic composites with Al2O3 insulation coating produced by sol-gel method10.1016/j.jallcom.2013.07.008 ↗
54. Annealing effects on magnetic properties and strength of organic-silicon epoxy resin-coated soft magnetic composites10.1177/0954406213515112 ↗
55. Investigation of magnetic properties, residual stress and densification in compacted iron powder specimens coated with polyepoxy10.1016/j.matchemphys.2008.10.013 ↗
56. Soft Magnetic Alloy-Polymer Composite for High-Frequency Power Electronics Application10.1007/s11664-013-2866-7 ↗