Crystallinity tuning of LCNO/graphene nanocomposite cathode for high-performance lithium-ion batteries
Source abstract
Abstract
In this work, a graphene-enhanced LiCo 0.525Ni 0.475O 2 (LCNOG) cathode was synthesized by self-propagating high-temperature synthesis and the effects of annealing at 650–850 °C were investigated. Sharper X-ray diffraction peaks showed enhanced crystallization with an increase in average crystallite size from 28 nm to 56 nm after annealing at 850 °C. LCNOG annealed at 850 °C delivered a high capacity of over 2030 J compared to 1280 J, with a near ideal coulombic efficiency of 99.5 % and long cycle stability. The acceleration of kinetics is evidenced by more favorable redox peak positions in voltammetry and a 5-fold lower interfacial resistance in electrochemical impedance spectroscopy. The improved performance is due to the larger grain size, higher crystallinity, increased conductivity and graphene-induced diffusion facilitation. The relationship between crystallinity and cathodic properties provides critical insight into cathode design. The exceptional performance achieved by tailoring crystallinity through annealing makes LCNOG a potential material for high-voltage cathodes for lithium-ion technology.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Graphene research and applications · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Self-supported graphene nanosheet-based composites as binder-free electrodes for advanced electrochemical energy conversion and storage10.1007/s41918-022-00138-6 ↗
2. Synthesis and photocatalytic activity for TiO 2 nanoparticles as air purification10.1051/matecconf/201816205006 ↗
3. Rechargeable batteries: technological advancement, challenges, current and emerging applications10.1016/j.energy.2022.126408 ↗
4. Defining the quantum workforce landscape: a review of global quantum education initiatives10.1117/1.OE.61.8.081806 ↗
5. Improved optical and electrical properties for heterojunction solar cell using Al2O3/ITO double-layer anti-reflective coating10.1016/j.rinp.2021.104640 ↗
6. A journey through layered cathode materials for lithium ion cells – from lithium cobalt oxide to lithium-rich transition metal oxides10.1016/j.jallcom.2021.159239 ↗
7. Properties of LiCo0.5Ni0.45Ag0.05O2 thin films for high storage energy capacity by pulsed laser deposition10.1016/j.egyr.2020.08.028 ↗
8. Optimization of VOSO4@C cathode materials with CNT and GO for lithium-ion batteries10.1016/j.jallcom.2022.165354 ↗
9. Solid-state lithium-ion battery: the key components enhance the performance and efficiency of anode, cathode, and solid electrolytes10.1016/j.jallcom.2023.172318 ↗
10. Facile sol-gel derived nanostructured spinel Co3O4 as electrode material for high-performance supercapattery and lithium-ion storage
11. Effect of Different synthesis methods on morphology and electrochemical behavior of spinel NiCo2O4 nanostructures as electrode material for energy storage application10.1016/j.inoche.2021.108996 ↗
12. Improvement of Li-ion batteries energy storage by graphene additive10.1016/j.egyr.2019.10.019 ↗
13. Advances in nanostructures fabricated: via spray pyrolysis and their applications in energy storage and conversion10.1039/C8CS00904J ↗
14. The effect of adding graphene nanoparticles to the thermal performance of LiCo0525Ni0475O2 cathode materials in Li-ion batteries10.1088/1757-899X/987/1/012012 ↗
15. Synthesis and characterisation of reduced graphene oxide/bismuth composite for electrodes in electrochemical energy storage devices10.1002/cssc.201601553 ↗
16. I.S.M. Noor, M.M.I.M. Hasnan, Application of graphene in energy storage devices, in: Functional Materials from Carbon, Inorganic, and Organic Sources: Methods and Advances, Vol. 135, 2022, pp. 135–156, doi: 10.1016/B978-0-323-85788-8.00019-7.10.1016/B978-0-323-85788-8.00019-7 ↗
17. Engineering layer structure of MoS2-graphene composites with robust and fast lithium storage for high-performance Li-ion capacitors10.1016/j.ensm.2017.07.013 ↗
18. Role of graphene-based nanocomposites as anode material for lithium-ion batteries10.1016/j.mseb.2022.116141 ↗
19. Review on carbon and silicon based materials as anode materials for lithium ion batteries
20. Could graphene construct an effective conducting network in a high-power lithium ion battery?10.1016/j.nanoen.2012.02.004 ↗
21. Tuning the interface interaction between Nb2O5 nanosheets/graphene for high current rate and long cyclic lithium-ion batteries10.1016/j.electacta.2022.141397 ↗
22. Small amount of reduce graphene oxide modified Li4Ti5O12 nanoparticles for ultrafast high-power lithium ion battery10.1016/j.jpowsour.2014.12.075 ↗
23. Effect of graphene nanosheet dispersion on diffusion-induced stresses in layered Sn-based nanocomposite electrode for lithium-ion batteries10.1016/j.mechmat.2020.103390 ↗
24. A strategy to integrate the preparation of graphene with the preparation of electrode slurry for lithium-ion batteries10.1016/j.mseb.2023.116764 ↗
25. Synthesis and characterization of graphene and its composites for lithium-ion battery applications: a comprehensive review10.1016/j.aej.2023.07.044 ↗
26. Graphene: chemistry and applications for lithium-ion batteries10.3390/electrochem3010010 ↗
27. The effect of annealing on a 3D SnO2/graphene foam as an advanced lithium-ion battery anode
28. Regeneration of LiNixCoyMnzO2 cathode materials from spent lithium-ion batteries: a review10.1016/j.jallcom.2023.171130 ↗
29. The influence of annealing on a large specific surface area and enhancing electrochemical properties of reduced graphene oxide to improve the performance of the active electrode of supercapacitor devices
30. Preparation and characterization of LiCo0.5Ni0.45Ag0.05O2 cathode material for lithium-ion battery10.1007/s10854-018-9451-z ↗
31. Cathode materials for rechargeable lithium batteries: recent progress and future prospects
32. Single-crystal high-nickel layered cathodes for lithium-ion batteries: advantages, mechanism, challenges and approaches
33. Critical review on the degradation mechanisms and recent progress of Ni-Rich layered oxide cathodes for lithium-ion batteries10.1016/j.enchem.2023.100103 ↗
34. Nitrate-melt synthesized HT-LiCoO2 as a superior cathode-material for lithium-ion batteries10.3390/ma2030857 ↗
35. Effect of annealing treatment on electrochemical property of LiNi0.5Mn1.5O4 spinel10.1016/S1003-6326(07)60086-7 ↗
36. Protonation of Li (Co, Ni, Mn)O2 compounds in acidic conditions10.1016/j.jssc.2020.121478 ↗
37. A kinetic descriptor to optimize co-precipitation of nickel-rich cathode precursors for lithium-ion batteries10.1016/j.jelechem.2022.116828 ↗
38. Mo-doped LiV3O8 nanorod-assembled nanosheets as a high performance cathode material for lithium ion batteries10.1039/C4TA05616G ↗
39. Investigation the improvement of high voltage spinel LiNi0.5Mn1.5O4 cathode material by anneal process for lithium ion batteries10.1016/j.gee.2020.03.001 ↗
40. Enhancement of electrochemical performance by the oxygen vacancies in hematite as anode material for lithium-ion batteries10.1186/s11671-016-1783-0 ↗
41. Multi-scale tailoring of lithium ion diffusion from densification to coarsening10.1016/j.matdes.2023.111695 ↗
42. An impedance model based on a transmission line circuit and a frequency dispersion Warburg component for the study of EIS in Li-ion batteries10.1016/j.jelechem.2020.114305 ↗
43. Water-splitting properties of Bi-phased TiO2 nanotube arrays subjected to high-temperature annealing10.1016/j.ceramint.2020.05.246 ↗
44. Effect of doped Mn on improving the electrochemical performance of LiFePO410.1007/s10854-019-02833-5 ↗
45. Influence of annealing atmosphere on Li 2 ZrO3-coated LiNi0.6Co0.2Mn0.2O2 and its high-voltage cycling performance10.1016/j.electacta.2019.01.077 ↗
46. Control growth of mesoporous nickel tungstate nanofiber and its application as anode material for lithium-ion batteries10.1016/j.electacta.2016.11.154 ↗
47. Highly enhanced lithium storage capability of LiNi0.5Mn1.5O4 by coating with Li2TiO3 for Li-ion batteries10.1039/C4TA03802A ↗
48. Microstructure and ionic conductivities of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes produced by cold sintering assisted process10.1016/j.jallcom.2023.168702 ↗
49. Anti-oxygen leaking LiCoO210.1002/adfm.201901110 ↗
50. Direct conversion of degraded LiCoO2 cathode materials into high-performance LiCoO2: a closed-loop green recycling strategy for spent lithium-ion batteries10.1016/j.ensm.2021.12.013 ↗
51. Lithium-ion-transfer kinetics of single LiMn2O4 particles10.1002/anie.201610485 ↗
52. Controllable growth of LiMn2O4 by carbohydrate-assisted combustion synthesis for high performance Li-ion batteries10.1016/j.nanoen.2019.103936 ↗