journal article·2023-10

Investigating the effect of different parameters on the rheological behavior of hybrid nano-lubricant containing MWCNT and CuO nanoparticles using response surface methodology (RSM)

Mohammad Hemmat Esfe, Davood Toghraie, Fatemeh Amoozadkhalili

Publisher page

Abstract

In this study, changes in the viscosity of MWCNT-CuO (40%-60%)/ 10 W40 hybrid nano-lubricant (HNL) were modeled and evaluated with the influence of independent parameters using response surface methodology (RSM). RSM with statistical mathematical techniques and appropriate modeling is one of the best methods for evaluating changes in viscosity in terms of independent parameters. Independent and effective parameters on viscosity include temperature (T), solid volume fraction ( SVF ) and shear rate (SR). Viscosity changes were investigated by presenting different models using 174 laboratory data and the best model among the different models with three parameters T, SR and SVF was introduced. The accuracy of the models was checked with R 2, Adjusted R 2, and Predicted R 2 parameter values. The three-parameter model with parameter values R 2 = 0.9992 Adjusted R 2 = 0.9990 and Predicted R 2 = 0.9986 has higher accuracy than other models. Using the optimal model, the process of viscosity changes was analyzed and investigated, and after evaluating the independent parameters, it was found that the effect of T on viscosity is greater than other parameters. The SR parameter has the least effect on viscosity changes. Also, the normal scatter diagram for the Quartic model for viscosity in terms of T, SVF and SR parameters is close to the bisector line and does not need a transfer function. The graph of the residual values according to the predicted values is in the range between + 3.7 and −3.7. Tthis shows that the accuracy of the selected model is satisfactory.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Injection Molding Process and Properties · Rheology and Fluid Dynamics Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Improvement of thermal conductivity properties of drilling fluid by CuOnanofluid
2. Choi, S. U., & Eastman, J. A. (1995).Enhancing thermal conductivity of fluids with nanoparticles(No.ANL/MSD/CP-84938; CONF-951135-29). Argonne National Lab. (ANL), Argonne, IL (United States).10.1115/IMECE1995-0926 ↗
3. The effect of organic ligand modification on protein corona formation of nanoscale metal organic frameworks10.1016/j.cclet.2022.02.052 ↗
4. The development of molecular and nano actinide decorporation agents10.1016/j.cclet.2022.04.017 ↗
5. Tailoring the polarity of polymer shell on BaTiO3 nanoparticle surface for improved energy storage performance of dielectric polymer nanocomposites10.1016/j.cclet.2020.12.032 ↗
6. Surface facets dependent oxygen evolution reaction of single Cu2O nanoparticles10.1016/j.cclet.2022.03.010 ↗
7. Polymeric nanocomposite materials: preparation and characterization of star-shaped PbS nanocrystals and their influence on the thermal stability of acrylonitrile–butadiene–styrene (ABS) copolymer10.1016/j.poly.2011.01.012 ↗
8. Oxidation of cyclohexene with tert-butylhydroperoxide and hydrogen peroxide catalyzed by alumina-supported manganese (II) complexes10.1016/S1381-1169(02)00045-6 ↗
9. Synthesis and characterization of host (nanodimensional pores of zeolite-Y)–guest [unsaturated 16-membered octaaza–macrocycle manganese (II), cobalt (II), nickel (II), copper (II), and zinc (II) complexes] nanocomposite materials10.1246/cl.2005.1444 ↗
10. Synthesis and characterization of ZnO nanocrystals from thermolysis of new precursor10.1016/j.cej.2008.09.042 ↗
11. Alumina-supported Mn (II), Co (II), Ni (II) and Cu (II) bis (2-hydroxyanil) acetylacetone complexes as catalysts for the oxidation of cyclohexene with tert-butylhydroperoxide10.1016/S1381-1169(03)00128-6 ↗
12. Insights into impacts of Co3O4-CeO2 nanocomposites on the electrochemical hydrogen storage performance of g-C3N4: Pechini preparation, structural design and comparative study10.1016/j.jallcom.2022.166564 ↗
13. Oxidation of cyclohexene with tert-butylhydroperoxide catalysted by host (nanocavity of zeolite-Y)/guest (Mn (II), Co (II), Ni (II) and Cu (II) complexes of N, N′-bis (salicylidene) phenylene-1, 3-diamine) nanocomposite materials (HGNM)10.1016/j.molcata.2006.07.048 ↗
14. On the Thermal Conductivity Assessment of Oil-Based Hybrid Nanofluids using Extended Kalman Filter integrated with feed-forward neural network10.1016/j.ijheatmasstransfer.2021.121159 ↗
15. Thermal Management of Solar Photovoltaic Cell by Using Single Walled Carbon Nanotube (SWCNT)/Water: Numerical Simulation and Sensitivity Analysis10.3390/su141811523 ↗
16. Thermal conductivity modeling of nanofluids containMgO particles by employing different approaches10.3390/sym12020206 ↗
17. Degradation and device physics modeling of SWCNT/CdTe thin film photovoltaics10.1016/j.spmi.2015.09.023 ↗
18. An experimental determination and accurate prediction of dynamic viscosity of MWCNT (% 40)-SiO2 (% 60)/5W50 nano-lubricant10.1016/j.molliq.2018.02.095 ↗
19. Thermal conductivity of a hybrid nanofluid10.1007/s10973-017-6836-9 ↗
20. Experimental Study of Rheological Behavior of MWCNT-Al2O3/SAE50 Hybrid Nanofluid to Provide the Best Nano-lubrication Conditions
21. Aghaei.A .; Khorasanizadeh. H.; Sheikhzadeh.G.A ,(2017). Measurement of the dynamic viscosity of hybrid engine oil-Cuo-MWCNT nanofluid, development of a practical visc correlation and utilizing the artificial neural network , Heat and Mass Transfer , 9: 138-150.10.1007/s00231-017-2112-6 ↗
22. Deep image retrieval using artificial neural network interpolation and indexing based on similarity measurement10.1049/cit2.12083 ↗
23. A higher prediction accuracy–based alpha–beta filter algorithm using the feedforward artificial neural network
24. Improving sentence simplification model with ordered neurons network10.1049/cit2.12047 ↗
25. Sharma, S., Verma, K. and Hardaha, P. Implementation of Artificial Intelligence in Agriculture. J. Comput. Cogn. Eng. (2022). https://doi.org/10.47852/bonviewJCCE2202174.10.47852/bonviewJCCE2202174 ↗
26. Chen, Z. Research on internet security situation awareness prediction technology based on improved RBF neural network algorithm. J. Comput. Cogn. Eng., 1(3), (2022) pp.103-108. https://doi.org/10.47852/bonviewJCCE149145205514.10.47852/bonviewJCCE149145205514 ↗
27. Hanif, R., Mustafa, S., Iqbal, S. and Piracha, S. A study of time series forecasting enrollments using fuzzy interval partitioning method. J. Comput. Cogn. Eng. (2022). https://doi.org/10.47852/bonviewJCCE2202159.10.47852/bonviewJCCE2202159 ↗
28. Optimal design and feature selection by genetic algorithm for emotional artificial neural network (EANN) in rainfall-runoff modeling10.1007/s11269-021-02818-2 ↗
29. Determining the optimal structure for accurate estimation of the dynamic viscosity of oil-based hybrid nanofluid containing MgO and MWCNTs nanoparticles using multilayer perceptron neural networks with Levenberg-Marquardt Algorithm
30. Statistical investigation for developing a new model for rheological behavior of ZnO–Ag (50%–50%)/Water hybrid Newtonian nanofluid using experimental data10.1016/j.physa.2019.03.118 ↗
31. Experimental investigation of switchable behavior of CuO-MWCNT (85%–15%)/10W-40 hybrid nano-lubricants for applications in internal combustion engines10.1016/j.molliq.2017.06.075 ↗
32. Examining rheological behavior of MWCNT-TiO2/5W40 hybrid nanofluid based on experiments and RSM/ANN modeling10.1016/j.molliq.2021.115969 ↗
33. Designing a neural network for predicting the heat transfer and pressure drop characteristics of Ag/water nanofluids in a heat exchanger10.1016/j.applthermaleng.2017.06.046 ↗
34. Experimental investigation and rheological behaviors of water-based drilling mud contained starch-ZnO nanofluids through response surface methodology10.1016/j.molliq.2018.11.142 ↗
35. Experimental investigation into efficiency of SiO2/water-based nanofluids in photovoltaic thermal systems using response surface methodology10.1016/j.solener.2022.02.021 ↗
36. Optimization of wavy direct absorber solar collector (WDASC) using Al2O3-water nanofluid and RSM analysis10.1016/j.applthermaleng.2017.04.137 ↗
37. Efficacy of hybrid nano-powder presence on the thermal conductivity of the engine oil: an experimental study10.1016/j.powtec.2020.05.004 ↗
38. Potential application of Response Surface Methodology (RSM) for the prediction and optimization of thermal conductivity of aqueous CuO (II) nanofluid: A statistical approach and experimental validation10.1016/j.physa.2020.124353 ↗
39. Statistical modelling for the Ultrasonic photodegradationRhodamine B dye using aqueous based Bi-metal doped TiO2 supported montmorillonite hybrid nanofluid via RSM
40. Application of three-level general factorial design approach for thermal conductivity of MgO/water nanofluids10.1016/j.applthermaleng.2017.07.211 ↗
41. Identification of the key variables on thermal conductivity of CuOnanofluid by a fractional factorial design approach10.1080/10407790.2013.831674 ↗
42. Study of MWCNT (40%)–CuO (60%)/10W40 hybrid nanofluid for improving laboratory oil performance by laboratory method and statistical response surface methodology10.1016/j.aej.2022.07.047 ↗
43. Response surface designs for experiments in bioprocessing10.1111/j.1541-0420.2005.00444.x ↗
44. Response surface methodology (RSM) as a tool for optimization in analytical chemistry10.1016/j.talanta.2008.05.019 ↗
45. Rheological behavior characteristics of ZrO2-MWCNT/10w40 hybrid nano-lubricant affected by temperature, concentration, and shear rate: An experimental study and a neural network simulating10.1016/j.physe.2017.12.023 ↗
46. A novel study on rheological behavior of ZnO-MWCNT/10w40 nanofluid for automotive engines10.1016/j.molliq.2017.11.135 ↗
47. Mir Mohammad Hosseini, F., Ebadi, T., Eslami, A., Mir Mohammad Hosseini, S. M., &Jahangard, H. R. (2019). Investigation into geotechnical properties of clayey soils contaminated with gasoil using Response Surface Methodology (RSM).ScientiaIranica,26(3), 1122-1134.