journal article·2023-06

Synthesis and post-heat treatment of complex compositions in Cu-Ti-O system: Phase investigation and optical properties

Nahid Javadi Baygi, Sahar Mollazadeh Beidokhti, Jalil Vahdati Khaki, Hamid Niazmand

Publisher page

Abstract

Thin layers of Cu xTiO y and CuO/TiO 2 compositions were successfully synthesized and coated on an alumina foam separately through a facile solution combustion synthesis method. The chemical composition, morphology, and microstructure of the synthesized powders and coated samples were analyzed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopy (EDS) methods, respectively. Depending on the initial temperature of the combustion process and/or the duration of the further heat treatment process, XRD results confirmed the crystallization of the CuO, TiO 2, CuTiO 3, and Cu 3TiO 4 phases. Results of UV–vis diffuse reflectance spectroscopy (DRS) illustrated a broad absorption bandwidth covering from 350 nm to 800 nm in the synthesized samples. Prolonging the duration of the heat treatment process at 1000 °C from 20 to 240 min diminished the bandgap values of the prepared samples from 2.9 to 2.07 eV and increased the visible absorption efficiency. The photoluminescence (PL) results revealed that the coated layers could generate UV, blue, and red light emissions. X-ray photoelectron spectroscopy (XPS) analysis was carried out to highlight the change in the surface composition during the local melting and solidification process in the simultaneously synthesized and coated samples. XPS results showed that the surface composition of the coated layer is mostly composed of Cu 2+. The photocatalytic performance of the coated foam against methylene blue was about 70 % as a result of the presence of copper oxide on the surface layer. Methanol, ethanol, and acetic acid were used as the electron, hole, and radical scavengers, respectively. Acetic acid as a scavenger was more effective than methanol and ethanol in declining the photocatalyst performance. The photocatalytic activity of the sample containing complex oxides such as CuTiO 3 and Cu 3TiO 4 stayed approximately unchanged in the presence of methanol and ethanol.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · Advanced Photocatalysis Techniques · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Parameters affecting the photocatalytic degradation of dyes using TiO2-based photocatalysts : A review10.1016/j.jhazmat.2009.05.039 ↗
2. Nanocarbons-Supported and Polymers-Supported Titanium Dioxide Nanostructures as Efficient Photocatalysts for Remediation of Contaminated Wastewater and Hydrogen
3. Phosphorus modified and CuI incorporated polymeric g-C3N4 photocatalyst for efficient photocatalytic hydrogen production under direct solar light irradiation
4. M.S. Jyothi, V. Nayak, K.R. Reddy, S. Naveen, A. V. Raghu, Non-metal (Oxygen, Sulphur, Nitrogen, Boron and Phosphorus)-Doped Metal Oxide Hybrid Nanostructures as Highly Efficient Photocatalysts for Water Treatment and Hydrogen Generation, (2019) 83–105. https://doi.org/10.1007/978-3-030-10609-6_3.10.1007/978-3-030-10609-6_3 ↗
5. Investigation into the effects of SiO2/TiO2 nanolayer on the thermal performance of solar box type cooker
6. Design of eco-friendly PVA/TiO2-based nanocomposites and their antifungal activity study10.1680/jgrma.19.00002 ↗
7. Charge carrier processes and optical properties in TiO2 and TiO2-based heterojunction photocatalysts: A review10.3390/ma14071645 ↗
8. Methylene blue photocatalytic degradation under visible light irradiation on copper phthalocyanine-sensitized TiO2 nanopowders10.1016/j.mseb.2017.06.017 ↗
9. Liquid-like grain boundary complexion and sub-eutectic activated sintering in CuO-doped TiO210.1016/j.actamat.2017.03.037 ↗
10. Origin of the different photoactivity of N-doped anatase and rutile TiO210.1103/PhysRevB.70.085116 ↗
11. Optimization and an insightful properties-Activity study of electrospun TiO2/CuO composite nanofibers for efficient photocatalytic H2 generation10.1016/j.apcatb.2013.03.033 ↗
12. Full Range Dielectric Characteristics of Calcium Copper Titanate Thin Films Prepared by Continuous Composition-Spread Sputtering10.1021/co500057u ↗
13. Synthesis of composite nanopowder through Mn doped ZnS-CdS systems and its structural, optical properties10.1016/j.molstruc.2021.129875 ↗
14. Structural, morphological and optical properties of Ba1-xCuxTiO3 (X = 0.2, 0.4, 0.6, 0.8) nanoparticles synthesizedby hydrothermal method10.1016/j.matchemphys.2018.05.052 ↗
15. Prospective of combustion method for preparation of nanomaterials: A challenge10.1016/j.mseb.2021.115054 ↗
16. Improving the physicochemical properties of NaCl-assisted solution combustion synthesized iron oxide nanoparticles by controlling the thermodynamics of the process10.1016/j.ceramint.2021.03.233 ↗
17. In silico study and experimental evaluation of the solution combustion synthesized manganese oxide (MnO2) nanoparticles10.1016/j.ceramint.2021.09.245 ↗
18. Accelerated crystallization of CuAlO2 delafossite phase by controlling thermal regime during solution combustion synthesis10.1016/j.ceramint.2020.05.040 ↗
19. Solution combustion synthesis (SCS) of theranostic ions doped biphasic calcium phosphates; kinetic of ions release in simulated body fluid (SBF) and reactive oxygen species (ROS) generation
20. One-pot synthesis of Cu–TiO2/CuO nanocomposite: Application to photocatalysis for enhanced H2 production, dye degradation & detoxification of Cr (VI)10.1016/j.ijhydene.2019.10.081 ↗
21. A review on nano-TiO2 sol-gel type syntheses and its applications10.1007/s10853-011-5378-y ↗
22. Modified auto-combustion synthesis of mixed-oxides TiO2/NiO nanoparticles
23. Effects of organic hole scavengers on the photocatalytic reduction of selenium anions10.1016/S1010-6030(03)00171-0 ↗
25. Solution combustion synthesis, energy and environment: Best parameters for better materials10.1016/j.pcrysgrow.2018.03.001 ↗
26. M. Serhan, M. Sprowls, D. Jackemeyer, M. Long, I.D. Perez, W. Maret, N. Tao, E. Forzani, Total iron measurement in human serum with a smartphone, AIChE Annu. Meet. Conf. Proc. 2019-Novem (2019). https://doi.org/10.1039/x0xx00000x.10.1109/JTEHM.2020.3005308 ↗
27. Single-phase magnetite with high saturation magnetization synthesized via modified solution combustion synthesis procedure10.1016/j.ceramint.2018.08.012 ↗
28. Structural Transformation and Melting in Gold Shock Compressed to 355 GPa10.1103/PhysRevLett.123.045702 ↗
29. Facile and green synthesis of CuO nanoneedles with high photo catalytic activity10.1007/s10854-016-4992-5 ↗
30. Developing of nano sized fibrous eutectic silicon in hypereutectic Al–Si alloy by laser remelting10.1038/s41598-020-69072-1 ↗
31. Formation mechanism of CaCO3 spherulites in the myostracum layer of limpet shells10.3390/cryst7100319 ↗
32. How To Correctly Determine the Band Gap Energy of Modified Semiconductor Photocatalysts Based on UV-Vis Spectra10.1021/acs.jpclett.8b02892 ↗
33. A. Escobedo-Morales, I.I. Ruiz-López, M. de L. Ruiz-Peralta, L. Tepech-Carrillo, M. Sánchez-Cantú, J.E. Moreno-Orea, Automated method for the determination of the band gap energy of pure and mixed powder samples using diffuse reflectance spectroscopy, Heliyon 5 (2019) 1–19. https://doi.org/10.1016/j.heliyon.2019.e01505.10.1016/j.heliyon.2019.e01505 ↗
34. Effect of nanographene platelets on adsorption and sonophotocatalytic performances of TiO2/CuO composite for removal of organic pollutants10.1016/j.materresbull.2017.10.033 ↗
35. Significantly enhanced visible light photocatalytic efficiency of phosphorus doped TiO2 with surface oxygen vacancies for ciprofloxacin degradation: Synergistic effect and intermediates analysis10.1016/j.jhazmat.2018.03.013 ↗
36. The effect of nanoparticle and mesoporous TiO2 additions on the electronic characteristics of reduced graphene oxide nanocomposites with zinc oxide under UV irradiation10.1016/j.mseb.2019.06.003 ↗
37. A highly efficient hybrid GaAs solar cell based on colloidal-quantum-dot- sensitization10.1038/srep05734 ↗
38. Blue-green and red photoluminescence in CaTiO3:Sm10.1016/j.jlumin.2006.08.100 ↗
39. Surface plasmon mediated optical properties of ZnO/Au/TiO2 nanoheterostructure rod arrays10.1016/j.mseb.2018.08.001 ↗
40. Band alignment and charge transfer pathway in three phase anatase-rutile-brookite TiO2 nanotubes: An efficient photocatalyst for water splitting10.1016/j.apcatb.2017.06.033 ↗
41. Enhanced visible light photocatalytic activity of BiFeO3-ZnO p-n heterojunction for CO2 reduction10.1016/j.mseb.2018.12.023 ↗
42. CdO-CuO-TiO2 ternary dielectric systems: Subsolidus phase diagram and the effects of Cu segregation10.1016/j.jeurceramsoc.2018.07.038 ↗
43. Fabrication of flexible sheets of Cu/CuO/Cu2O heterojunction nanodisks: A dominant performance of multiple photocatalytic sheets under natural sunlight10.1016/j.mseb.2020.114652 ↗
44. Hierarchical C-doped CuO nanorods on carbon cloth as flexible binder-free anode for lithium storage10.1016/j.matdes.2018.11.042 ↗
45. Significant influence of controllable surface oxygen vacancies of CuO for enhancing sensitivity of glucose detection10.1016/j.apsusc.2021.151649 ↗
46. Carbon-Doped ZnO hybridized homogeneously with graphitic carbon nitride nanocomposites for photocatalysis10.1021/jp502677h ↗
47. Fabrication of a Cu2O/Au/TiO2 composite film for efficient photocatalytic hydrogen production from aqueous solution of methanol and glucose10.1016/j.mseb.2017.02.011 ↗
48. Novel-structured electrospun TiO2/CuO composite nanofibers for high efficient photocatalytic cogeneration of clean water and energy from dye wastewater10.1016/j.watres.2012.12.044 ↗
49. S. Kumar, K.R. Reddy, C.V. Reddy, N.P. Shetti, V. Sadhu, M. V. Shankar, V.G. Reddy, A. V. Raghu, T.M. Aminabhavi, Metal Nitrides and Graphitic Carbon Nitrides as Novel Photocatalysts for Hydrogen Production and Environmental Remediation, in: S. Balakumar, V. Keller, M.V. Shankar (Eds.), Nanostructured Mater. Environ. Appl., Springer International Publishing, Cham, 2021: pp. 485–519. https://doi.org/10.1007/978-3-030-72076-6_19.10.1007/978-3-030-72076-6_19 ↗
50. Synergistic effect of multiple-phase rGO/CuO/Cu2O heterostructures for boosting photocatalytic activity and durability10.1016/j.apsusc.2020.148607 ↗