Wireless chipless RFID temperature and humidity sensor based on Fe2O3-Co3O4/SnO2/rGO composites
Source abstract
Abstract
Due to its convenience and affordability, chipless RFID technology has become increasingly popular for detecting environmental temperature and humidity. This paper presents a wireless chipless RFID sensor for measuring temperature and humidity. The sensor utilizes a composite material consisting of Fe 2O 3-Co 3O 4、SnO 2、and rGO to achieve accurate detection of both temperature and humidity. We investigated the change of RFID resonance frequency under different temperature and humidity variations. The temperature and humidity sensitive material is coated on the surface of the antenna by spinning coating machine. The combined structure of nanoparticle-attached rods of Fe 2O 3-Co 3O 4, granular clusters of SnO 2 and flakes of rGO enhances the sensor’s sensitivity to temperature and humidity measurements. The sensitivity of the temperature and humidity sensor is approximately-0.293 MHz/°C and −2.12 dB/°C during a change in ambient temperature from 10 °C to 85 °C, and approximately −2.11 MHz/°C and 0.19 dB/%RH during a change in humidity from 10 %RH to 65 %RH at normal ambient temperature. The response time of the temperature and humidity sensor to temperature and humidity changes is 15.3 s and 10.1 s, and the recovery time is 21.7 s and 17.5 s, respectively. The wireless chipless RFID sensor has good sensitivity and responsiveness for temperature and humidity measurements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Smart paper from graphene coated cellulose for high-performance humidity and piezoresistive force sensor[J]10.1016/j.synthmet.2020.116420 ↗
2. The enhanced performance of capacitive-type humidity sensors based on ZnO nanorods/WS2 nanosheets heterostructure[J]10.1016/j.snb.2020.127810 ↗
3. Halloysite nanotubes: natural, environmental-friendly and low-cost nanomaterials for high-performance humidity sensor[J]10.1016/j.snb.2020.128204 ↗
4. Multi-parameters detection implemented by LC sensors with branching inductors[J]10.1109/JSEN.2018.2876060 ↗
5. A MoS2 nanoflakes-based LC wireless passive humidity sensor[J]10.3390/s18124466 ↗
6. A reusable battery-free RFID temperature sensor[J]10.1109/TAP.2019.2921150 ↗
7. A review of IoT sensing applications and challenges using RFID and wireless sensor networks[J]10.3390/s20092495 ↗
8. Interdigital capacitor-based passive LC resonant sensor for improved moisture sensing[J]10.3390/s20216306 ↗
9. Construction of Fe2O3/Co3O4/exfoliated graphite composite and its high efficient treatment of landfill leachate by activation of potassium persulfate[J]10.1016/j.cej.2018.08.168 ↗
10. A U-shaped microfiber interferometer coated with MoS2 film for simultaneous measuring relative humidity and temperature[J]10.1016/j.yofte.2022.103009 ↗
11. Dual-cavity fiber Fabry-Perot interferometer coated with SnO2 for relative humidity and temperature sensing[J]10.1109/JSEN.2020.3008167 ↗
12. Coaxial electrospinning Fe2O3@Co3O4 double-shelled nanotubes for enhanced ethanol sensing performance in a wide humidity range[J]10.1016/j.jallcom.2021.161868 ↗
13. The effect of rGO-doping on the performance of SnO2/rGO flexible humidity sensor[J]10.3390/nano11123368 ↗
14. Soft, wirelessly powered humidity sensor based on SnO2 nanowires for wireless/wearable sensor application[J]10.3390/ma13092176 ↗
15. QCM-based humidity sensor and sensing properties employing colloidal SnO2 nanowires[J]10.1016/j.snb.2019.05.009 ↗
16. Preparation of polypyrrole-decorated MnO2/reduced graphene oxide in the presence of multi-walled carbon nanotubes composite for high performance asymmetric supercapacitors[J]10.1016/j.physb.2018.11.070 ↗
17. ZnO/MoS2/rGO nanocomposite non-contact passive and chip-less LC humidity sensor[J]10.1109/JSEN.2022.3169152 ↗
18. An LC-type passive wireless humidity sensor system with portable telemetry unit[J]10.1109/JMEMS.2014.2333747 ↗
19. Passive RFID microstrip photosensitive sensor based on TiO2/rGO/CuO composite[J]10.1016/j.vacuum.2022.111736 ↗
20. Investigation of chemical bonding and electronic network of rGO/PANI/PVA electrospun nanofiber[J]10.1007/s00289-020-03442-7 ↗
21. A facile and one step synthesis of large surface area SnO2 nanorods and its photocatalytic activity[J]10.1007/s10854-017-6529-y ↗
22. Ultrathin-nanosheet-induced synthesis of 3D transition metal oxides networks for lithium ion battery anodes[J]10.1002/adfm.201605017 ↗
23. Characterization of sp3 carbon produced by plasma deposition on gamma-TiAl alloys[J]10.1016/j.apsusc.2008.02.023 ↗
24. Facile preparation of RGO/Cu2O/Cu composite and its excellent microwave absorption properties[J]10.1016/j.matlet.2013.07.045 ↗
25. XPS and Kelvin probe studies of SnO2/RGO nanohybrids based NO2 sensors[J]10.1016/j.apsusc.2019.05.176 ↗
26. Humidity sensing behaviour of Lyophilized rGO/Fe2O3 nanocomposite[J]10.1007/s10904-020-01570-1 ↗
27. A hybrid thread-based temperature and humidity sensor for continuous wound monitoring[J]10.1016/j.snb.2022.132414 ↗
28. Fiber temperature and humidity sensor based on photonic crystal fiber coated with graphene oxide[J]10.1016/j.optcom.2020.125707 ↗
29. Fe2O3-Co3O4 nanocomposites based humidity and temperature sensors[J]10.1016/j.molliq.2017.04.060 ↗
30. Preparation, investigation, and temperature sensing application of rGO/SnO2/Co3O4 composite[J]10.1007/s10854-022-09247-w ↗