Synthesis of industrially appealing low-silica zeolites using aluminum scraps and sand
Source abstract
Abstract
In this study, Carbon footprint (CF) and hydric footprint (HF) were estimated for the synthesis of zeolite A and X using aluminum cans and sand as sources of aluminum and silicon, respectively. The fuse reagent prepared from sand, at 250 and 500° C, and the filtrated of fuse reagent product were considered as input variables in the experimental design. Aluminum waste, the mixture of aluminum waste treated with sodium hydroxide, and the formed Al(OH) 3 were also considered as input parameters for the aluminum sources. Results showed that for obtaining of the fuse reagent based on sand, a temperature as low as 250 °C was sufficient to obtain the desired zeolites A, X and P without increasing the CF or the HF. The type of aluminum source did not display a significant impact on the CF and FH for the synthesis of the targeted zeolites.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Zeolite Catalysis and Synthesis · Mesoporous Materials and Catalysis · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. The hydrothermal synthesis of zeolites: precursors, intermediates and reaction mechanism10.1016/j.micromeso.2005.02.016 ↗
2. Sustainable strategies to synthesize small-pore NaP zeolites using natural minerals10.1007/s10853-023-09218-4 ↗
3. Sustainable route for the synthesis of SAPO-34 zeolites10.1016/j.jssc.2020.121442 ↗
4. Crystallization of low silica Na-A and Na-X zeolites from transformation of kaolin and obsidian by alkaline fusion
5. Zeolite synthesis from paper sludge ash at low temperature (90°C) with addition of diatomite10.1016/j.jhazmat.2005.09.045 ↗
6. Study of fly ash based zeolite by using slow positrons10.1016/j.mseb.2020.114890 ↗
7. Synthesis of 4A zeolites from kaolin for obtaining 5A zeolites through ionic exchange for adsorption of arsenic10.1016/j.mseb.2012.01.015 ↗
8. Optimisation of zeolite LTA synthesis from alum sludge and the influence of the sludge source10.1016/j.jes.2020.06.019 ↗
9. Zeolite synthesis from low-cost materials and environmental applications: A review10.1016/j.envadv.2020.100019 ↗
10. Preparation of zeolite type faujasite from glass waste and aluminum scraps for the selective catalytic reduction of NO with NH310.1016/j.inoche.2023.110749 ↗
11. A review on synthesis of zeolites from natural clay resources and waste ash: Recent approaches and progress10.1016/j.mineng.2023.108086 ↗
12. Research progress on green synthesis of various high-purity zeolites from natural material-kaolin10.1016/j.jclepro.2021.127248 ↗
13. Waste to health: Green synthesis of Zn loaded LTA zeolite prepared from waste glass and aluminum scrap with high antioxidant and antimicrobial activities10.1016/j.jclepro.2023.139946 ↗
14. Synthesis and characterization of ecofriendly materials zeolite from waste glass and aluminum scraps using the hydrothermal technique10.1016/j.jece.2022.108561 ↗
15. Synthesis of zeolite NaA at room temperature: The effect of synthesis parameters on crystal size and its size distribution10.1016/j.apt.2012.12.010 ↗
16. Cost-effective microwave rapid synthesis of zeolite NaA for removal of methylene blue10.1016/j.cej.2013.06.005 ↗
17. Transformation of Production Sand Waste to FAU and LTA zeolites for selective moisture adsorption and ethanol conversion10.1007/s11244-023-01853-0 ↗
18. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗