journal article·2025-04

Nd doping based on optimized calcination process to facilitate energy band electron transition: First-principles calculations enable NCM to achieve performance breakthroughs

Ruifen Yang, Longjiao Chang, Zenglei Hou, Xinran Li, Jie Zou

Publisher page

Abstract

LiNi 0.6Co 0.2Mn 0.2O 2 (NCM622) was made via the hydrothermal approach in the present work. After careful consideration, the optimum preparation conditions were found by adjusting the calcination temperature. The initial discharge capacity of the sample at 850 ℃ is 176.2 mAh/g, and the initial coulomb efficiency is 96.8 %. After 300 cycles at 0.1C, the capacity retention rate of the material is 86.8 %.This served as the foundation for the investigation of the rare earth element Nd doping, the design and synthesis of the ternary cathode material Li[Ni 0.6Co 0.2Mn 0.2] 1−xNd xO 2 (x = 0.02, 0.04, and 0.06), and the testing of its phase and electrochemical performances. The results of the test proved that the optimal doping amount for the sample was 0.04, with a beginning coulomb efficiency of up to 97.6 %, an initial charging capacity of 205.7 mAh/g, and a capacity retention rate of up to 90.3 % after 300 cycles. The first discharge capacity of doped samples is higher than that of undoped samples, which may be due to the fact that doped neodymium ions reduce the mixed discharge of cations and increase the electrochemically active Li, thus increasing the first discharge capacity of materials. When the current density reaches 5C, the discharge capacity is 151.52 mAh/g, and the capacity retention rate is 79.8 % after 300 cycles. The first-principle calculation reveals that the addition of lanthanide atoms causes the entire band to shift toward the low energy direction and lowers the energy required for the electrons to transition from the conduction band to the valence band, facilitating the electronic transition. This fully supports the idea that Nd doping enhances NCM622′s electronic conductivity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Battery Materials and Technologies · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Lithium-ion batteries: outlook on present, future, and hybridized technologies[J]10.1039/C8TA10513H ↗
2. Promoting reversibility of Co‐free layered cathodes by Al and cation vacancy[J]
3. A protophilic MOF enables Ni‐rich lithium‐battery stable cycling in a high water/acid content[J]10.1002/adma.202212292 ↗
4. Collaboratively enhancing electrochemical properties of LiNi0.83Co0.11Mn0.06O2 through doping and coating of quadrivalent elements[J]10.1007/s12598-023-02356-3 ↗
5. Lowering charge transfer barrier of LiMn2O4 via nickel surface doping to enhance Li+ intercalation kinetics at subzero temperatures[J]10.1021/jacs.9b05531 ↗
6. Internet of things dataset for home renewable energy management[J]10.1016/j.dib.2024.110166 ↗
7. Computational approach inspired advancements of solid-state electrolytes for lithium secondary batteries: from first-principles to machine learning[J]
8. Synthesis and processing by design of high-nickel cathode materials[J]
9. From atomistic modeling to materials design: computation-driven material development in lithium-ion batteries[J]10.1007/s11426-022-1506-1 ↗
10. Oxalate co-precipitation synthesis of LiNi0.6Co0.2Mn0.2O2 for low-cost and high-energy lithium-ion batteries[J]10.1016/j.mtcomm.2019.02.001 ↗
11. Phosphate polyanion materials as high-voltage lithium-ion battery cathode: a review[J]10.1021/acs.energyfuels.1c01102 ↗
12. Cathodes pinpoints for the next generation of energy storage devices: the LiFePO4 case study[J]
13. Resolving complex intralayer transition motifs in high-Ni-content layered cathode materials for lithium-ion batteries[J]10.1038/s41563-022-01461-5 ↗
14. Co/S co-doped Li4Ti5O12 as lithium-ion batteries anode for high-rate[J]
15. A Co-Modified strategy for enhanced structural stability and long cycling life of Ni-Rich LiNi0.8Co0.1Mn0.1O2 cathode material[J]10.1016/j.jallcom.2020.157877 ↗
16. Quaternary layered Ni-rich NCMA cathode for lithium-ion batteries[J]10.1021/acsenergylett.8b02499 ↗
17. The role of intragranular nanopores in capacity fade of nickel-rich layered Li(Ni1−x−yCoxMny)O2 cathode materials[J]10.1021/acsnano.9b05047 ↗
18. Controlling residual lithium in high-nickel (> 90%) lithium layered oxides for cathodes in lithium-ion batteries[J]10.1002/anie.202007436 ↗
19. Electronic structure influences on the formation of the solid electrolyte interphase[J]10.1039/D0EE01825B ↗
20. Yttrium modified Ni-rich LiNi0.8Co0.1Mn0.1O2 with enhanced electrochemical performance as high energy density cathode material at 4.5 V high voltage[J]10.1016/j.jallcom.2018.09.281 ↗
21. High-efficiency Mo doping stabilized LiNi0.9Co0.1O2 cathode materials for rapid charging and long-life Li-ion batteries[J]10.1016/j.ces.2020.115518 ↗
22. The synergism of nanoplates with habit-tuned crystal and substitution of cobalt with titanium in Ni-rich LiNi0.80Co0.15Al0.05O2 cathode for lithium-ion batteries[J]10.1016/j.jallcom.2020.154555 ↗
23. STEM-EELS analysis of improved cycle life of lithium-ion cells with Al2O3-coated LiNi0.8Co0.1Mn0.1O2 cathode active material[J]10.1016/j.jallcom.2021.159259 ↗
24. A low cost single-crystalline LiNi0.60Co0.10Mn0.30O2 layered cathode enables remarkable cycling performance of lithium-ion batteries at elevated temperature[J]10.1016/j.jpowsour.2021.230028 ↗
25. A universal etching method for synthesizing high-performance single crystal cathode materials[J]10.1016/j.nanoen.2021.106194 ↗
26. Combining surface holistic Ge coating and subsurface Mg doping to enhance the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathodes[J]10.1021/acsami.2c04666 ↗
27. LiFePO4 as a dual-functional coating for separators in lithium-ion batteries: a new strategy for improving capacity and safety[J]10.1016/j.jechem.2023.07.037 ↗
28. Influence of annealing atmosphere on Li2ZrO3-coated LiNi0.6Co0.2Mn0.2O2 and its high-voltage cycling performance[J]10.1016/j.electacta.2019.01.077 ↗
29. Overcoming the interfacial challenges of LiFePO4 in inorganic all-solid-state batteries[J]10.1021/acsenergylett.2c02138 ↗
30. Synthesis and enhanced electrochemical properties of LiNi0.6Co0.2Mn0.2O2 cathode materials via SDBS-assisted hydrothermal method[J]10.1007/s10008-023-05533-7 ↗
31. Doping of rare earth elements: towards enhancing the electrochemical performance of pseudocapacitive materials[J]10.1016/j.jallcom.2023.170601 ↗
32. High-voltage cathode materials by combustion-based preparative approaches for Li-ion batteries application[J]10.1016/j.jpowsour.2020.228368 ↗
33. Targeted masking enables stable cycling of LiNi0.6Co0.2Mn0.2O2 at 4.6 V[J]10.1016/j.nanoen.2022.107123 ↗
34. Anode materials for lithium-ion batteries: a review[J]10.1016/j.apsadv.2022.100233 ↗
35. Critical review on low‐temperature Li‐ion/metal batteries[J]10.1002/adma.202107899 ↗
36. Stepwise dopant selection process for high‐nickel layered oxide cathodes[J]10.1002/aenm.202200136 ↗
37. Opportunities and challenges of lithium ion batteries in automotive applications[J]10.1021/acsenergylett.0c02584 ↗
38. Citraconic anhydride as an electrolyte additive to improve the high temperature performance of LiNi0.6Co0.2Mn0.2O2/graphite pouch batteries[J]10.1016/j.jallcom.2019.07.140 ↗
39. Capability and reversibility of LiCoO2 during charge/discharge with O3/H1-3 layered structure change[J]10.1149/1945-7111/abfc9d ↗
40. An in-depth understanding of the effect of aluminum doping in high-nickel cathodes for lithium-ion batteries[J]10.1016/j.ensm.2020.09.015 ↗
41. The theory guides the doping of rare earth elements in the bulk phase of LiNi0.6Co0.2Mn0.2O2 to reach the theoretical limit of energy density[J]10.1016/j.jcis.2024.11.216 ↗