journal article·2025-03

Optical and thermal properties of grown bulk ZnMgS mixed crystals

Ali Abouais, Amine Alaoui Belghiti, Karol Strzałkowski, Amina Laouid, Diksha Singh, Daniel M. Kamiński, Grzegorz Trykowski, Abdelowahed Hajjaji

Publisher page

Abstract

This work investigates the optical and thermal properties of zinc sulfide ZnS single crystal mixed with magnesium (Zn 1−xMg xS). The starting material’s Mg mass ratio (x) varied from x = 0 to x = 0.34. The investigated alloys were grown using the vertical modified Bridgman method. The SEM/EDS method was used to check the accurate composition of the crystals. X-ray diffraction analysis was applied to check the phase and crystallinity of the grown alloys. The band gap energy was measured for each sample by transmission spectroscopy. The dynamical thermal properties were measured using photopyroelectric calorimetry (PPE). The thermal diffusivity and effusivity values were extracted from the experiment, allowing the calculation of the specimens’ thermal conductivity. The optical and thermal properties of grown Zn 1−xMg xS crystals versus composition were discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Temperature dependence of the energy gap of MgxZn1−xTe semiconductors alloys10.1016/0038-1098(78)90481-7 ↗
2. Tailoring the electrochemical performance of olivine phosphate cathode materials for Li-ion batteries by strain engineering: computational experiments10.1021/acsaem.3c00711 ↗
3. Identification of the photoluminescence response in the frequency domain modulated infrared radiometry signal of ZnTe:Cr bulk crystal10.1016/j.infrared.2016.08.005 ↗
4. Feeling the strain: Enhancing the thermodynamics characteristics of magnesium nickel hydride Mg2NiH4 for hydrogen storage applications through strain engineering10.1016/j.ijhydene.2024.04.159 ↗
5. Generation of red light with intense photoluminescence assisted by Forster resonance energy transfer from Znq2 and DCM thin films10.1007/s11356-022-23217-z ↗
6. Vibrational-mechanical properties of the highly-mismatched Cd1−xBexTe semiconductor alloy: experiment and ab initio calculations10.1038/s41598-023-39248-6 ↗
7. Growth of zinc blende MgS/ZnSe single quantum wells by molecular-beam epitaxy using ZnS as a sulphur source10.1063/1.126824 ↗
8. Determination of the band-gap of MgS and MgS-rich Zn1−xMgxSySe1−y alloys from optical transmission measurements10.1002/pssb.200983190 ↗
9. Single step chemical growth of ZnMgS nanorod thin film and its DFT study10.1016/j.mseb.2017.11.018 ↗
10. Influence of Mg content on molecular-beam-epitaxy-grown ZnMgS ultraviolet photodetectors10.1016/j.jcrysgro.2004.01.034 ↗
11. Detectivity studies of SMD-packaged ZnSSe and ZnMgS UV detectors10.1007/s11664-006-0262-2 ↗
12. Effect of shock compression on wurtzite-type ZnMgS crystals10.1063/1.3532045 ↗
13. Quaternary alloy Zn1−xMgxSySe1−y
14. Enhancing the efficiency and stability of Non_Toxic RbSn0.5Ge0.5I3_Based perovskite solar cells through optimization10.1016/j.mseb.2024.117672 ↗
15. Growth of octahedral structured AgBiS2 single crystals and its insights on the high performance electrocatalytic hydrogen generation10.1016/j.ijhydene.2024.06.157 ↗
16. Rapid, non-destructive determination of butter adulteration by means of photopyroelectric (PPE) calorimetry10.1007/s10973-016-5630-4 ↗
17. Structural, thermal and dielectric properties of Pb(Mg1/3Nb2/3)1‑xTixO3 ceramics at morphotropic phase boundary10.1051/epjap/2020200171 ↗
18. Photothermal determination of the surface treatment of Cd1-xBexTe mixed crystals10.3390/app13042113 ↗
19. Growth of ZnS single crystals from the melt at 1850 °C under argon pressure of 50 atm
20. Basic problems of vertical Bridgman growth of CdTe10.1016/0921-5107(93)90005-8 ↗
21. Growth of β-Ga2O3 single crystals using vertical Bridgman method in ambient air10.1016/j.jcrysgro.2016.04.022 ↗
22. Thermoelectric potential: role of bismuth in CuSb1−xBixSe2 for improved transport properties10.1007/s10854-024-12966-x ↗
23. Thermal properties of selected II–VI semiconductors determined by photopyroelectric calorimetry technique10.1007/s10973-020-09897-0 ↗
24. Thermal transport properties of Cd1-xMgxSe mixed crystals measured by means of the photopyroelectric method10.1007/s10765-009-0590-6 ↗
25. Thermal characterization of ZnBeMnSe mixed compounds by means of photopyroelectric and lock-in thermography methods10.1007/s00339-015-9086-3 ↗
26. Photopyroelectric calorimetry of solids10.1007/s10973-009-0513-6 ↗
27. Alloy disordering effects on the thermal conductivity and energy gap temperature dependence of Cd1−xZnxSe ternary crystals grown by the Bridgman method10.3390/ma16113945 ↗
28. On the optimization of experimental parameters in photopyroelectric investigation of thermal diffusivity of solids10.1016/j.tca.2015.06.027 ↗
29. Thermal diffusivity of semiconductors evaluated by differential PPE method10.7567/JJAPS.31S1.38 ↗
30. Photopyroelectric calorimetry of liquids; recent development and applications10.1134/S1054660X09060255 ↗
31. How to correctly determine the band gap energy of modified semiconductor photocatalysts based on UV–Vis spectra10.1021/acs.jpclett.8b02892 ↗
32. E band‐gap energy and lattice constant of ternary Zn1−xMgxSe as functions of composition10.1063/1.118132 ↗
33. BeCdSe as a ternary alloy for blue-green optoelectronic applications10.1063/1.1342202 ↗
34. Optical characterizations of Cd1-XZnXTe mixed crystals grown by vertical Bridgman-Stockbarger method10.1016/j.jcrysgro.2020.125491 ↗
35. Molecular-beam epitaxy growth and properties of BexZn1−xTe alloys for optoelectronic devices
36. Study of the thermal properties and lattice disorder effects in CdTe–based crystals: CdBeTe, CdMnTe, and CdZnTe10.3390/cryst12111555 ↗
37. Lattice thermal conductivity of disordered semiconductor alloys at high temperatures
38. Lattice thermal conductivity of group-IV and III–V semiconductor alloys10.1063/1.2779259 ↗