p-Type LaCuOS films grown by PLD using a quaternary target fabricated by a two-step solid-state reaction/sulfurization process
Source abstract
Abstract
A LaCuOS target was obtained through a two-step route: first, the synthesis of the CuLaO 2 compound by solid-state reaction, and subsequently its sulfurization under a sulfur atmosphere. The LaCuOS powder was used to deposition films by pulsed laser deposition at different growth times: 10, 15, 20, and 25 min. The films were deposited in vacuum at a substrate temperature of 400 °C and a wavelength of 266 nm. The structural characterization showed that the dislocation density and stress in LaCuOS films increase as the deposition time increases. The LaCuOS films exhibit optical transmittance of 52–81 % in the visible region. Electrical measurements indicate high values of hole mobility and carrier densities up to 10 19 cm −3, with a p-type electrical conductivity of 0.74 S/cm; these properties suggest that LaCuOS films have the potential to be integrated as transparent material in devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Room temperature deposition of high figure of merit p-type transparent conducting Cu -Zn-S thin films and their application in organic solar cells as an efficient hole transport layer10.1016/j.jallcom.2020.154507 ↗
2. Improved performance of transparent p-type conductors CuCrO2: Mg delafossite thin films through easy and low cost laser annealing10.1016/j.matlet.2022.131795 ↗
3. Screening criteria for high-performance p-type transparent conducting materials and their applications
4. Semi-transparent p-type barium copper sulfide as a back contact interface layer for cadmium telluride solar cells10.1016/j.solmat.2020.110764 ↗
5. Plasma-treated room temperature synthesized CuCrO2/Au/CuCrO2 on Polyethylene terephthalate: Towards a high-performance flexible p-type transparent conductor10.1016/j.tsf.2021.138582 ↗
6. A. Facchetti, T.J. Marks, Transparent Electronics: From Synthesis to Applications, 2010.10.1002/9780470710609 ↗
7. Resonant Ta Doping for Enhanced Mobility in Transparent Conducting SnO210.1021/acs.chemmater.9b04845 ↗
8. Resonant doping for high mobility transparent con- ductors: the case of Mo-doped In2O310.1039/C9MH01014A ↗
9. P-type electrical conduction in transparent thin films of CuAlO210.1038/40087 ↗
10. Highly Conducting p-Type Transparent LnCuOS (Ln = La and Nd) and p−n Junction by Using Ink10.1021/acsaelm.9b00336 ↗
11. Understanding the p -type defect chemistry of CuCrO210.1039/c0jm03852k ↗
12. P-type transparent LaCuOS semiconductor synthesized via a novel two-step solid state reaction and sulfurization process10.1016/j.ceramint.2017.02.035 ↗
13. Transparent p-type semiconductor: LaCuOS layered oxysulfide10.1063/1.1319507 ↗
14. Recent developments in the emerging field of crystalline p-type transparent conducting oxide thin films10.1016/j.pcrysgrow.2005.10.001 ↗
15. A New Highly Conductive Direct Gap p-Type Semiconductor La1−xYxCuOS for Dual Applications: Transparent Electronics and Thermoelectricity10.1021/acsami.9b21150 ↗
16. Frontier of transparent oxide semiconductors10.1016/S0038-1101(03)00208-9 ↗
17. Single-atomic-layered quantum wells built in wide-gap semiconductors LnCuOCh (Ln=lanthanide, Ch=chalcogen)10.1103/PhysRevB.69.155305 ↗
18. Understanding doping anomalies in degenerate p-type semiconductor LaCuOSe10.1039/C4TC00096J ↗
19. Degenerate p -type conductivity in wide-gap LaCuOS1 − xSex (x = 0–1) epitaxial films
20. Preparation of LaCuOS by solid phase reaction method using La2S3 and CuO starting materials10.1002/pssc.200669584 ↗
21. High performance p-type transparent LaCuOS thin film fabricated through a hydrogen-free method
22. Third-order optical nonlinearity originating from room-temperature exciton in layered compounds LaCuOS and LaCuOSe
23. Synthesis of non-stoichiometric (LaO)CuS thin films by pulse laser deposition10.1007/s00339-008-4768-8 ↗
24. Study of CuSbSe2 thin films grown by pulsed laser deposition from bulk source material10.1016/j.mssp.2020.105420 ↗
25. Mechanism for Heteroepitaxial Growth of Transparent P-Type Semiconductor: LaCuOS by Reactive Solid-Phase10.1021/cg034163l ↗
26. CdTe thin films grown by pulsed laser deposition using powder as target: Effect of substrate temperature10.1016/j.jcrysgro.2013.09.036 ↗
27. Substrate temperature effect of CdTe films grown by PLD on photovoltaic properties of CdS/CdTe solar cells
28. One-step electrodeposition of CuAlGaSe2 thin films using triethanolamine as a complexing agent10.1016/j.tsf.2020.138351 ↗
29. Synthesis of n-type ZrO2 doped E-Ga2O3 thin films by PLD fabrication of Schottky diode10.1016/j.jallcom.2021.163120 ↗
30. K.H.L. Zhang, K. Xi, M.G. Blamire, R.G. Egdell, P -type transparent conducting oxides, J. Phys. Condens. Matter. 383002 (n.d.) 383002. https://doi.org/10.1088/0953-8984/28/38/383002.10.1088/0953-8984/28/38/383002 ↗
31. Optoelectronic properties and electronic structure of YCuOSe
32. Probing the significance of RF magnetron sputtering conditions on the physical properties of CdS thin films for ultra-thin CdTe photovoltaic applications10.1016/j.apsusc.2021.151640 ↗
33. Raman spectroscopic investigations on delafossite CuLaO2 at high pressures10.1088/1742-6596/377/1/012020 ↗
34. Copper Delafossites under High Pressure — A Brief Review of XRD and Raman Spectroscopic Studies
35. Exploring the origin of ultralow thermal conductivity in layered BiOCuSe
36. Hydrogen photoproduction over new catalyst CuLaO210.1016/j.jphotochem.2006.09.017 ↗
37. Effects of the Cu off-stoichiometry on transport properties of wide gap p-type semiconductor, layered oxysulfide LaCuSO10.1063/1.4890302 ↗
38. Preparation of transparent p-type (La1−xSrxO)CuS thin films by r.f. sputtering technique10.1016/S0040-6090(02)00200-6 ↗
39. Influence of the substrate temperature on the formation of CuSbSe2 thin films grown by pulsed laser deposition10.1016/j.ceramint.2022.08.092 ↗
40. High-temperature epitaxy of metastable sulfides on oxide substrates using stoichiometric transportation10.1002/1521-4095(200111)13:21<1624::AID-ADMA1624>3.0.CO;2-B ↗
41. Fabrication of P-type transparent conducting CuxZn1-xS films on glass substrates with high conductivity and optical transparency10.1016/j.jallcom.2018.03.402 ↗
42. Optoelectronic properties of Cl and F doped CdS thin films grown by chemical bath deposition
43. Transparent p-Type Semiconductors: Copper-Based Oxides and Oxychalcogenides
44. Efficient calculation of carrier scattering rates from first principles10.1038/s41467-021-22440-5 ↗
45. Latest directions in p-type transparent conductor design currently leads the Materials
46. Effect of Hole Effective Mass and Carrier Concentration on the Conductivity of a Transparent p-type LaCuOS Semiconductor with Good Transmittance in both Visible and Mid-infrared Ranges10.1002/pssr.202100273 ↗
47. Optical transparency, carrier mobility, and electrical conductivity of La-based copper layered oxychalcogenides: A density functional theory study10.1016/j.solener.2020.04.091 ↗