Probing the acoustic losses of graphene with a low-loss quartz bulk-acoustic-wave resonator at cryogenic temperatures
Source abstract
Abstract
We observe mechanical effects of an exfoliated graphene monolayer deposited on a quartz crystal substrate designed to operate as an extremely low-loss bulk-acoustic-wave cavity at liquid-helium temperature.This is achieved by sensing overtones of the three thickness eigen-modes of the so-called SC-cut, since all three modes, two shear mode and one extensional mode, can be electrically probed with such a crystal cut. From quality-factor measurements, the mechanical losses of the adhesive graphene monolayer are assessed to be about 8 x 10-4 at 4 K in the best case. They are therefore significantly greater than those already reported for suspended membranes but also for adherent layers on SiO2/Si substrates operating in torsional modes. In fact, results reveal that surface scattering occurs due to a roughness degradation of a factor 7. In addition, the mechanical losses presented here are also placed in the context of a device submitted to thermomechanical stresses, but which are not the only ones existing. Some of them could be intrinsic ones related to the deposition process of the graphene layer. Based on a force-frequency theory applied to the three thickness modes which react differently to stresses, it is demonstrated that this stress effect actually entangled with that of mass loading reconciles the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical and Optical Resonators · Acoustic Wave Resonator Technologies · Advanced MEMS and NEMS Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Detection of individual gas molecules adsorbed on graphene10.1038/nmat1967 ↗
2. Graphene-coated quartz crystal microbalance for detection of volatile organic compounds at room temperature10.1016/j.tsf.2014.07.036 ↗
3. Losses in high quality quartz crystal resonators at cryogenic temperatures10.1063/1.3559611 ↗
4. Extremely low loss phonon-trapping cryogenic acoustic cavities for future physical experiments10.1038/srep02132 ↗
5. Gravitational wave detection with high frequency phonon trapping acoustic cavities10.1103/PhysRevD.90.102005 ↗
6. Acoustic tests of Lorentz symmetry using quartz oscillators
7. Next generation of phonon tests of Lorentz invariance using quartz BAW resonators10.1109/TUFFC.2018.2824845 ↗
8. Hybrid quantum systems with trapped charged particles10.1103/PhysRevA.95.022327 ↗
9. Cavity optomechanics10.1103/RevModPhys.86.1391 ↗
10. Piezo-optomechanical coupling of a 3D microwave resonator to a bulk acoustic wave crystalline resonator
11. Bulk crystalline optomechanics
12. Cryogenic optomechanic cavity in low mechanical loss material
13. Measurement of refractive index at cryogenic temperature of absorptive silver thin films used as reflectors in a Fabry-Perot cavity10.1364/AO.434072 ↗
14. A new method of probing mechanical losses of coatings at cryogenic temperatures10.1063/1.4972106 ↗
15. Quality factor measurements of various types of quartz crystal resonators operating near 4 K10.1109/TUFFC.2015.2508812 ↗
16. Graphene as a massless electrode for ultrahigh-frequency piezoelectric nanoelectromechanical systems10.1021/acs.nanolett.5b01208 ↗
17. Graphene as an active virtually massless top electrode for RF solidly mounted bulk acoustic wave (SMR-BAW) resonators
18. URL https://www.graphenea.com/collections/buy-graphene-films/products/graphene-on-your-substrate (accessed Dec. 2021).
19. Determination of refractive index and extinction coefficient of standard production CVD-graphene
20. On the absorption of sound in solids
21. Uber Schall absorption in festen Körpen
22. Ch. interaction of sound waves with thermal phonons in dielectric crystals10.1016/B978-0-12-395668-2.50011-9 ↗
23. Observation of Rayleigh phonon scattering through excitation of extremely high overtones in low-loss cryogenic acoustic cavities for hybrid quantum systems10.1103/PhysRevLett.111.085502 ↗
24. Defect studies of thin layers by the vibration-reed techniques
25. Bunch · 2008
26. Performance of monolayer graphene nanomechanical resonators with electrical readout10.1038/nnano.2009.267 ↗
27. Energy dissipation in graphene mechanical resonators with and without free edges
28. Large-scale arrays of single-layer graphene resonators10.1021/nl102713c ↗
29. Shear modulus of monolayer graphene prepared by chemical vapor deposition10.1021/nl204196v ↗
30. Low temperature elastic properties of chemically reduced and CVD-grown graphene thin films10.1016/j.diamond.2010.02.011 ↗
31. Determination of the elastic moduli of CVD graphene by probing graphene/polymer Bragg stacks10.1088/2053-1583/abfedb ↗
32. Van der waals integration before and beyond two-dimensional materials10.1038/s41586-019-1013-x ↗
33. Phonon energy dissipation in friction between graphene/graphene interface10.1063/1.5130705 ↗
34. Reduction of spectral phonon relaxation times from suspended to supported graphene10.1063/1.4712041 ↗
35. Distortions of thickness shear mode shapes in plano-convex quartz resonators with mass perturbations10.1109/58.63115 ↗
36. Microwave phonon-attenuation measurements in quartz10.1103/PhysRev.159.703 ↗
37. Extremely low-loss acoustic phonons in a quartz bulk acoustic wave resonator at millikelvin temperature10.1063/1.4729292 ↗
38. Verwendung von schwingquarzen zur wägung dünner schichten und zur mikrowägung10.1007/BF01337937 ↗
39. Lostis · Rev. Opt. Instrum. · 1959 · 206
40. Investigation of film-thickness determination by oscillating quartz resonators with large mass load10.1063/1.1660931 ↗
41. The mechanism of the interaction of thin films with resonating quartz crystal substrates: the energy transfer model10.1016/0040-6090(79)90349-3 ↗
42. Physical description of a viscoelastically loaded AT-cut quartz resonator10.1063/1.346548 ↗
43. Viscoelastic, mechanical, and dielectric measurements on complex samples with the quartz crystal microbalance10.1039/b803960g ↗
44. Johannsmann · 2015
45. Thermal expansion, Grüneisen functions and static lattice properties of quartz10.1088/0022-3719/15/20/016 ↗
46. First-principles determination of the structural, vibrational and thermodynamic properties of diamond, graphite, and derivatives10.1103/PhysRevB.71.205214 ↗
47. Probing thermal expansion of graphene and modal dispersion at low-temperature using graphene NEMS resonators10.1088/0957-4484/21/16/165204 ↗
48. Negative thermal expansion coefficient of graphene measured by Raman spectroscopy10.1021/nl201488g ↗
49. Coefficient of thermal expansion measurements for freestanding nanocrystalline ultra-thin gold films10.1007/s12541-013-0311-8 ↗
50. Thermal expansion of copper, silver, and gold at low temperatures10.1007/BF00629120 ↗
51. Corruccini · 1961 · vol. 29 · 22 pages
52. Derivation of the shear compliance of thin films on quartz resonators from comparison of the frequency shifts on different harmonics: A perturbation analysis10.1063/1.1358317 ↗
53. Frictional characteristics of atomically thin sheets10.1126/science.1184167 ↗
54. Ultrastrong adhesion of graphene membranes10.1038/nnano.2011.123 ↗
55. Nanoscale interfacial friction and adhesion on supported versus suspended monolayer and multilayer graphene10.1021/la304079a ↗
56. Apparent negative mass in QCM sensors due to punctual rigid loading10.1088/1757-899X/42/1/012046 ↗
57. Apparent negative mass in QCM sensors due to punctual rigid loading
58. Positive frequency shifts observed upon adsorbing micron-sized solid objects to a quartz crystal microbalance from the liquid phase10.1021/ac902012e ↗
59. A. Ballato, E.P. Eernisse, T.J. Lukaszek, Experimental verification of stress compensation in the SC cut, in: IEEE Ultrasonics Symposium Proceedings, 1978, pp. 144–147, http://dx.doi.org/10.1109/ULTSYM.1978.197020.10.1109/ULTSYM.1978.197020 ↗
60. Perturbation theory for linear electroelastic equations for small fields superposed on a bias10.1121/1.382031 ↗
61. Nonlinear electroelastic equations for small fields superposed on a bias10.1121/1.1914312 ↗
62. Elastic waves in crystals under a bias10.1080/00150198208210610 ↗
63. Intrinsic stress in thin films deposited on anisotropic substrates and its influence on the natural frequencies of piezoelectric resonators10.1063/1.329495 ↗
64. Third order elastic constants and the velocity of small amplitude elastic waves in homogeneous stresses media10.1103/PhysRev.133.A1604 ↗
65. J.T. Stewart, D.S. Stevens, Analysis of the effects of mounting stresses on the resonant frequency of crystal resonators, in: IEEE International Frequency Control Symposium, 1997, pp. 621–629, http://dx.doi.org/10.1109/FREQ.1997.638727.10.1109/FREQ.1997.638727 ↗
66. Elastic and piezoelectric constants of alpha-quartz10.1103/PhysRev.110.1060 ↗
67. Complete set of elastic and piezoelectric coefficients of alpha quartz at low temperatures10.1063/1.2816252 ↗
68. Force-frequency coefficient of singly rotated vibrating quartz crystals10.1147/rd.121.0092 ↗
69. D. Janiaud, L. Nissim, J.-J. Gagnepain, Analytical calculation of initial stress effects on anisotropic crystals : application to quartz resonators, in: Proc. of the 32nd Annual Frequency Control Symposium, 1978, pp. 169–179, http://dx.doi.org/10.1109/FREQ.1978.200235.10.1109/FREQ.1978.200235 ↗
70. Simultaneous thin film stress and mass change measurements using quartz resonators10.1063/1.1661322 ↗
71. Subjecting a graphene monolayer to tension and compression10.1002/smll.200900802 ↗
72. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
73. Tamarin · 2002 · 808 pages
74. Investigation of the deformation mechanics in nanoindenter deflected freestanding submicron gold thin films
75. Merle · 2013
76. Elastic constants of compression-annealed pyrolytic graphite
77. First temperature derivatives of the fundamental elastic constants of quartz10.1063/1.326234 ↗
78. Temperature dependence of the resonant frequency of electroded contoured AT-cut quartz crystal resonators10.1063/1.332221 ↗
79. A perturbation method for predicting the temperature and stress sensitivities of quartz vibrating structures simulated by finite-element analysis10.1109/TUFFC.2006.148 ↗
80. ThirdOrder elastic coefficients of quartz10.1063/1.1707824 ↗
81. Hutchinson · 1996
82. The effect of transverse shear deformation on the bending of elastic plates10.1115/1.4009435 ↗
83. Influence of rotatory inertia and shear on flexural motions of isotropic elastic plates10.1115/1.4010217 ↗
84. On-wafer characterization of thermomechanical properties of isotropic thin films deposited on anisotropic substrates10.1143/JJAP.47.5623 ↗
85. W.H. Whyte, K.R. Agricola, M. Derks, Airborne particle deposition in cleanrooms: relationship between deposition rate and airborne concentration, 0000. URL http://eprints.gla.ac.uk/119091/1/119091.pdf.