Electrohydrodynamic ink-jet printing characteristics of inks for temperature measurements
Source abstract
Abstract
Temperature sensors have high usability owing to their small size and high resolution. These can be achieved with electrohydrodynamic (EHD) ink-jet printing technology, but it is important to find applicable inks. Therefore, inks capable of measuring temperature were produced using polymer-based and surfactant-based solutions in this study. The temperature measurement performance of the inks was evaluated, in a high-temperature environment. Inks capable of sensing temperature were applied to an EHD ink-jet printer. Printable inks were derived, and experiments were conducted to determine the stability of the meniscus shapes and printed lines under varying voltage and height conditions. In addition, experiments were conducted to assess the variation in the line thickness with the printing speed by determining the optimum voltage and height parameters. Through these experiments, inks capable of measuring temperature were manufactured, and the optimal printing conditions for EHD ink-jet printing were obtained.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Electrowetting and Microfluidic Technologies · Innovative Microfluidic and Catalytic Techniques Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A prototype active-matrix OLED using graphene anode for flexible display application10.1080/15980316.2019.1680452 ↗
2. High performance piezocomposites for flexible device application10.1039/D0NR00111B ↗
3. Direct writing of copper conductive patterns by ink-jet printing10.1016/j.tsf.2006.11.142 ↗
4. The rheological behaviors of screen-printing pastes10.1016/j.jmatprotec.2007.06.067 ↗
5. Drug-printing by flexographic printing technology—A new manufacturing process for orodispersible films10.1016/j.ijpharm.2012.12.023 ↗
6. Printing parameters and ink components affecting ultra-fine-line gravure-offset printing for electronics applications10.1016/j.jeurceramsoc.2003.11.011 ↗
7. Yin · 2018 · 1
8. Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics10.1039/C7NR09570H ↗
9. Optimization of Experimental Parameters To Determine the Jetting Regimes in Electrohydrodynamic Printing10.1021/la403111m ↗
10. Design optimization of ink in electrohydrodynamic jet printing: Effect of viscoelasticity on the formation of Taylor cone jet10.1016/j.matdes.2015.09.141 ↗
11. Mechanism of electrohydrodynamic printing based on ac voltage without a nozzle electrode10.1063/1.3126957 ↗
12. High-speed and drop-on-demand printing with a pulsed electrohydrodynamic jet10.1088/0960-1317/20/9/095026 ↗
13. High-resolution electrohydrodynamic jet printing10.1038/nmat1974 ↗
14. Tip-assisted electrohydrodynamic jet printing for high-resolution microdroplet deposition
15. Experimental study of the influence of ink properties and process parameters on ejection volume in electrohydrodynamic jet printing10.3390/mi9100522 ↗
16. Nanoscale coaxial focused electrohydrodynamic jet printing10.1039/C8NR01001C ↗
17. Electrohydrodynamic 3D printing of orderly carbon/nickel composite network as supercapacitor electrodes10.1016/j.jmst.2020.12.034 ↗
18. Electrohydrodynamic jet printed conducting polymer for enhanced chemiresistive gas sensors10.1039/D0TC05719C ↗
19. High-resolution patterns of quantum dots formed by electrohydrodynamic jet printing for light-emitting diodes10.1021/nl503779e ↗
20. Reviewing thermal monitoring techniques for smart power modules, IEEE Trans10.1109/JESTPE.2021.3063305 ↗
21. A high-performance solid-state electrocaloric cooling system10.1126/science.aba2648 ↗
22. Energy efficiency optimization of an integrated heat pipe cooling system in data center based on genetic algorithm10.1016/j.applthermaleng.2020.115800 ↗
23. Li, Experiment investigation on a novel composite silica gel plate coupled with liquid-cooling system for square battery thermal management10.1016/j.applthermaleng.2020.116217 ↗
24. Printed temperature sensor based on PEDOT: PSS-Graphene oxide composite10.1109/JSEN.2020.2969667 ↗
25. Temperature sensor realized by inkjet printing process on flexible substrate10.1016/j.mseb.2015.11.003 ↗
26. High sensitivity flexible paper temperature sensor and body-attachable patch for thermometers10.1016/j.sna.2020.112205 ↗
27. Indium tin oxide thin-film thermocouple probe based on sapphire microrod10.3390/s20051289 ↗
28. A novel fiber-optic temperature sensor based on high temperature-dependent optical properties of ZnO film on sapphire fiber-ending10.1016/j.mseb.2010.03.083 ↗
29. Temperature-sensing inks using electrohydrodynamic inkjet printing technology10.3390/ma14195623 ↗
30. Electrical evaluations of anisotropic conductive film manufactured by electrohydrodynamic ink jet printing technology10.1016/j.orgel.2019.105561 ↗
31. Microstructure and electrical properties of porous (Ba, Sr)TiO3 ceramics10.1016/S0921-5107(01)00911-4 ↗
32. Polyhedral silver nanocrystals with distinct scattering signatures10.1002/anie.200601277 ↗
33. Sensing characteristics of improved positive temperature coefficient thermistors with paint forms10.1166/jnn.2021.19211 ↗