journal article·2022-08

Creep, recovery and dynamic mechanical properties of PEK/MWCNT nanocomposites

M.G. Kulthe, R.K. Goyal, S.P. Butee

Publisher page

Abstract

The creep behavior of the poly(ether-ketone) (PEK)/MWCNT nanocomposites fabricated by solution method followed by hot pressing were studied for the first time. The incorporation of MWCNT to the PEK increased significantly the Vickers microhardness, storage modulus and glass transition temperature. The microhardness and storage modulus of the nanocomposites increased up to 47 % and 67 %, respectively compared to neat PEK. Due to better dispersion of MWCNT in the matrix, the reinforcing efficiency of the nanocomposites containing lower loading of MWCNT was found better at higher temperatures too. Both creep strain and unrecovered strain (measured at 120 °C) of the nanocomposite containing 2.07 vol% MWCNT decreased significantly compared to the neat PEK. Thereafter further addition of MWCNT into the matrix increased both creep strain and unrecovered strain compared to that of 2.07 vol% nanocomposite.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Electrical, mechanical, and electromagnetic interference shielding properties of poly(ether-ketone)-MWCNT nanocomposites
2. G.-Fatou, High-performance nanocomposites based on polyetherketones10.1016/j.pmatsci.2012.03.003 ↗
3. Mechanical, thermomechanical, and creep performance of CNT embedded epoxy at elevated temperatures: An emphasis on the role of carboxyl functionalization
4. Dynamic mechanical and creep properties of poly(ether ketone)-graphite nanoplatelet (GNP) nanocomposites
5. A novel route for improving creep resistance of polymers using nanoparticles10.1016/j.compscitech.2007.01.015 ↗
6. High performance polyethylene nanocomposite fibers10.3144/expresspolymlett.2012.101 ↗
7. Creep resistant polymer nanocomposites reinforced with multiwalled carbon nanotubes10.1002/marc.200600866 ↗
8. Creep and physical behavior of PA6 nanocomposites10.1016/j.polymer.2005.10.120 ↗
9. The creep behaviour of poly(vinylidene fluoride)/bud-branched nanotubes nanocomposites10.1016/j.compscitech.2012.06.025 ↗
10. High-temperature creep properties of TATB-based polymer bonded explosives filled with multi-walled carbon nanotubes10.1039/C4RA11637B ↗
11. Study on the mechanical properties and creep behaviour of carbon fiber nano-composites
12. Effect of nanoparticle aggregation on the creep behavior of polymer nanocomposites10.1016/j.compscitech.2018.04.025 ↗
13. Multiwalled carbon nanotubes reinforced poly(ether-ketone) nanocomposites: Assessment of rheological, mechanical, and electromagnetic shielding properties10.1002/pat.4120 ↗
14. Creep behavior of polyurethane nanocomposites with carbon nanotubes10.1016/j.compositesa.2013.03.015 ↗
15. Increase the mechanical performance of polyvinylidene fluoride PVDF
16. Creep behavior of polystyrene/ fluorohectorite micro- and nanocomposites10.1002/marc.200600539 ↗
17. Creep resistant polymeric nanocomposites10.1016/j.polymer.2004.03.004 ↗
18. Creep and recovery of polystyrene composites filled with graphene additives10.1016/j.compscitech.2013.11.028 ↗
19. Creep response of a LDPE-based nanocomposites
20. Tensile creep behavior of polymethylpentene-silica nanocomposites10.1002/pi.2769 ↗
21. Cyclic creep of polymers and polymer-matrix composites10.1023/A:1010683609939 ↗
22. Synergistic effect of carbon nanotube and graphene nanoplates on the mechanical, electrical and electromagnetic interference shielding properties of polymer composites and polymer composite foams10.1016/j.cej.2018.07.144 ↗
23. Thermal and mechanical properties of carbon nanotube /epoxy nanocomposites reinforced with pristine and functionalized multiwalled carbon nanotubes10.1002/pc.23097 ↗
24. N. Darwish, A. A. E. Megeed, N. Badawy, A. E.-Bayaa and S. E.-Mogy, Creep behavior of carbon nanofillers/polypropylene composites, J App Sci 4(2) (2014) 425-435.
25. A. A. Moosa, A Ramazani S. A and M. N. Ibrahim, Effects of carbon-nanotubes on the mechanical and electrical properties of epoxy nanocomposites, Int J Current Eng Technol 5 (2015) 3253-3258.
26. Creep-resistant behavior of MWCNT-polycarbonate melt spun nanocomposite fibers at elevated temperature10.1016/j.polymer.2013.05.013 ↗
27. Micro-hardness and flexural properties of randomly-oriented carbon nanotube composites10.1177/0021998303037004043 ↗
28. Improvement in the mechanical properties of neat GFRPs with multi-walled CNTs10.1016/j.jmrt.2018.02.009 ↗
29. Zhang Preparation and characterization of carbon nanotube/polyetherimide nanocomposite films10.1016/j.compscitech.2006.09.007 ↗
30. Khan · 2016
31. Stress–strain behavior of multi-walled carbon nanotube/PEEK composites10.1016/j.compscitech.2010.10.001 ↗
32. Superior performance nanocomposites from uniformly dispersed octadecylamine functionalized multi-walled carbon nanotubes
33. Effect of multi walled carbon nanotube on mechanical, thermal and rheological properties of polypropylene10.1016/j.jmrt.2019.08.018 ↗
34. Dynamic mechanical behavior of melt-processed multi-walled carbon nanotube/poly (methyl methacrylate) composites10.1016/S0009-2614(01)00186-5 ↗
35. High performance polyetherketone-hexagonal boron nitride nanocomposites for electronic applications
36. H. G. M. Doan and P. Mertiny, Creep testing of thermoplastic fiber-reinforced polymer composite tubular coupons. Materials 13 (2020) 4637 (1-17).10.3390/ma13204637 ↗
37. Temperature dependence of creep and recovery behaviors of polymer composites filled with chemically reduced graphene oxide10.1016/j.compositesa.2014.11.031 ↗
38. Creep and recovery behavior of compression molded low density polyethylene/cellulose composites
39. High electromagnetic interference shielding of poly(ethersulfone)/multiwalled carbon nanotube nanocomposites fabricated by eco-friendly route10.1088/1361-6528/ab97d3 ↗