Solid-state ionics method fabricated high aspect ratio silver nanowires: Application in transparent conductive films
Source abstract
Abstract
Abstract Silver nanowires (AgNWs) with high aspect ratio were prepared by the solid-state ionics method using fast ionic conductor RbAg4I5 films under the different impressed currents and the corresponding transparent conductive films (TCFs) were prepared. The results indicate that the prepared AgNWs presented long-range order and short-range order and the average length of nanowires (NWs), which was approximately 400 μm, had no significant changes under different impressed currents. The best result of AgNWs-TCFs was the one with a transmittance of 87.3% at 550 nm accompanied with a low sheet resistance of 15.80 Ω/sq by controlling the drop-coating times, dispersant volume fraction and the impressed current intensity fixed at 2, 15% and 7 μA, respectively. The figure of merit for TCFs was 16.3, which is larger than the value of 8.8 for commercial indium tin oxide (ITO) films. These amazing results would render AgNWs-TCFs as a promising candidate to replace conventional ITO.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Fluid Dynamics and Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Effect of C4H6O6 concentration on the properties of SnS thin films for solar cell applications10.1016/j.apsusc.2018.09.214 ↗
2. Properties of transparent and conductive Al:ZnO/Au/Al:ZnO multilayers on flexible PET substrates10.1016/j.mseb.2015.06.008 ↗
3. Oxidation-resistant metallized nanofibers as transparent conducting films and heaters10.1016/j.actamat.2017.09.068 ↗
4. Direct spray-coating of highly robust and transparent Ag nanowires for energy saving windows10.1016/j.nanoen.2019.04.071 ↗
5. High-performance red organic light-emitting diodes with ultrathin Cu film as anodes10.1016/j.orgel.2019.02.027 ↗
6. Nanopatterned metallic films for use as transparent conductive electrodes in optoelectronic devices10.1021/nl1011239 ↗
7. One-step method to fabricate the highly porous layer of poly (pyrrole/(3, 4-ethylenedioxythiophene)/) wrapped graphene hydrogel composite electrode for the flexibile supercapacitor10.1016/j.matlet.2016.08.031 ↗
8. Environment and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
9. Optimization of silver nanowire-based transparent electrodes: effects of density, size and thermal annealing10.1039/C5NR04084A ↗
10. Ultrahigh aspect ratio copper-nanowire-based hybrid transparent conductive electrodes with PEDOT:PSS and reduced graphene oxide exhibiting reduced surface roughness and improved stability10.1021/acsami.5b01379 ↗
11. Microwave characterization of conducting polymer PEDOT: PSS film using a microstrip line for humidity sensor application10.1016/j.measurement.2019.01.032 ↗
12. Metal nano-grids for transparent conduction in solar cells10.1016/j.solmat.2017.04.048 ↗
13. Laser transmission welding and surface modification of graphene film for flexible supercapacitor applications10.1016/j.apsusc.2019.03.349 ↗
14. Transparent, conductive carbon nanotube films10.1126/science.1101243 ↗
15. Synthesis of copper nanowires and its application to flexible transparent electrode10.1016/j.jallcom.2015.09.279 ↗
16. Electrodeposited metal nanowires as transparent conductive electrodes: their release conditions, electrical conductivity, optical transparency and chemical stability10.1016/j.matdes.2018.07.048 ↗
17. Synthesis of uniform silver nanowires from AgCl seeds for transparent conductive films as via spin-coating at variable spin-speed10.1016/j.colsurfa.2018.11.050 ↗
18. Carbon nanotubes thin films: fabrication, properties, and applications10.1021/cr9002962 ↗
19. Preparation of carbon nanotube film with high alignment and elevated density10.1016/j.carbon.2017.04.072 ↗
20. Large-scale pattern growth of graphene films for stretchable transparent electrodes10.1038/nature07719 ↗
21. One-spot rapid synthesis of high aspect ratio silver nanowires for transparent conductive electrodes10.1016/j.materresbull.2018.02.010 ↗
22. Polyol synthesis of ultrathin and high-aspect ratio Ag nanowire for transparent conductive films10.1016/j.matlet.2017.02.011 ↗
23. Enhanced conductivity of transparent and flexible silver nanowire electrodes fabricated by a solution-processed method at room temperature10.1016/j.tsf.2017.01.027 ↗
24. Electrostatic spray deposition of highly transparent silver nanowire electrode on flexible substrate10.1021/am3023543 ↗
25. Formation of silver nanoparticles inside a soda-lime glass matrix in the presence of a high intensity Ar+ laser beam10.1063/1.3684552 ↗
26. The influence of post-annealing treatment on the wettability of Ag+/Na+ ion-exchanged soda-lime glasses10.1016/j.apsusc.2013.01.092 ↗
27. Synthesis of dimension-controlled silver nanowires for highly conductive and transparent nanowire films10.1016/j.actamat.2014.09.042 ↗
28. Fabrication of silver nanowire transparent electrodes at room temperature10.1007/s12274-011-0172-3 ↗
29. Effect of silver nitrate concentration of silver nanowires syhthesized using a polyol method and their application as transparent conductive films10.1016/j.tsf.2015.02.067 ↗
30. Shape-controlled synthesis of silver nanostructures10.1088/0957-4484/16/10/070 ↗
31. Synthesis of centimeter level AgCu alloy nanowires via a solid-state ionics method and their SERS effect10.1016/j.jallcom.2017.07.152 ↗
32. SERS effect of Rhodamine 6G molecular probe on AgAu alloy nanowires arrays by a solid-state ionics method10.1016/j.physe.2018.05.005 ↗
33. Solid-state ionics method fabricated centimeter level CuAu alloy nanowires: application in SERS10.1016/j.jcis.2017.04.025 ↗
34. New figure of merit for transparent conductors10.1063/1.323240 ↗
35. Formulation of concentrated and stable ink of silver nanowires with application in transparent conductive films10.1039/C6RA25508F ↗
36. Synthesis of very thin Ag nanowires with fewer particles by suppressing secondary seeding10.1039/C6CE02075E ↗
37. Growth process and investigation of some physical properties of CdS nanocrystals formed in polymer matrix by successive ionic layer adsorption and reaction (SILAR) method10.1016/j.jcrysgro.2007.03.010 ↗
38. Effect of Ar:N2 flow rate on morphology, optical and electrical properties of CCTO thin films deposited by RF magnetron sputtering10.1016/j.ceramint.2019.04.245 ↗
39. Effects of deposition time on properties of CaCu3Ti4O12 thin film deposited on ITO substrate by RF magnetron sputtering at ambient temperature10.1016/j.ceramint.2018.07.115 ↗
40. Structural, surface morphology and optical properties of sputter-coated CaCu3Ti4O12 thin film: influence of RF magnetron sputtering power10.1016/j.mssp.2017.04.019 ↗
41. Effects of annealing temperature on the structural, morphology, optical properties and resistivity of sputtered CCTO thin film10.1007/s10854-017-7067-3 ↗