Tailoring the proportion of particle size to evaluate extrusion-based 3D printed alumina ceramics
Source abstract
Abstract
Extrusion-based 3D printing is a promising technology for manufacturing ceramics. The pros include the customized shaping of the ceramic parts and the economical aspects. Exploring extrusion-based ceramic 3D printing necessitates careful control of the slurry preparation with different particle sizes, printing parameters, and sintering temperatures. Altering particle sizes and printing parameters is of interest to improve the properties of the extrusion-deposited ceramic parts. The alumina particles are prepared using the combination of three different particle sizes (15 µm, 12.5 µm, and 10 µm) and sintered at the range of densification temperature for alumina. The combination of ceramics is done in the proportions of composition A (50 % 10 µm + 50 % 12.5 µm), composition B (50 % 12.5 µm + 50 % 15 µm), composition C (50 % 10 µm + 50 % 15 µm), composition D (10 µm), composition E (12.5 µm), and composition F (15 µm). The outcomes suggest that the proportionate mixing of the different particle sizes leads to 3D printing of the parts with improved characteristics.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Effect of ceramic bonding phases on the thermo-mechanical properties of Al2O3-C refractories10.1016/j.ceramint.2013.01.024 ↗
2. Extrusion-based additive manufacturing of yttria-partially-stabilized zirconia ceramics10.1016/j.ceramint.2019.10.245 ↗
3. Synthesis of SiC/SiO2 core–shell powder by rotary chemical vapor deposition and its consolidation by spark plasma sintering10.1016/j.ceramint.2012.09.025 ↗
4. A novel fabrication strategy for additive manufacturing processes10.1016/j.jclepro.2020.122916 ↗
5. Optimization of process planning for reducing material consumption in additive manufacturing10.1016/j.jmsy.2017.05.003 ↗
6. Sintering energy conservation in extrusion-based 3D printing of porcelain ceramics blended with copper and allied alloys: A sustainable approach10.1016/j.ceramint.2023.10.204 ↗
7. Direct ink writing of dense alumina ceramics prepared by rapid sintering10.1016/j.ceramint.2022.07.028 ↗
8. Recent progress of alumina ceramics by direct ink writing: Ink design, printing and post-processing10.1016/j.ceramint.2023.01.143 ↗
9. Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach
10. P. Bhargav Chandan, M. Ravi Sankar, Synergistic regulation of sintering temperature in calcium silicide-infused porcelain ceramic 3D printing for dephosphorization and deoxygenation, MRS Commun., pp. 1–13, Oct. 2024, doi: 10.1557/s43579-024-00672-y.10.1557/s43579-024-00672-y ↗
11. Effects of ceramic layer height on the mechanical properties of Cf/SiC ceramic matrix composites fabricated by fiber-laying-assisted material extrusion 3D printing10.1016/j.coco.2024.101926 ↗
12. Extrusion-based 3D printing of bioactive glass scaffolds-process parameters and mechanical properties : A review10.1016/j.bprint.2022.e00219 ↗
13. A Statistical Analysis of Powder Flowability in Metal Additive Manufacturing10.1002/adem.202000022 ↗
14. Fabrication and compressive properties of closed-cell alumina ceramics by binding hollow alumina spheres with high-temperature binder10.1016/j.ceramint.2016.07.117 ↗
15. A comparison of the fluidity of spherical cement with that of broad cement and a study of the properties of fresh concrete using spherical cement10.1016/S0008-8846(99)00013-7 ↗
16. Additive manufacturing of zirconia ceramics by material jetting10.1016/j.jeurceramsoc.2021.04.018 ↗
17. Silica strengthened alumina ceramic cores prepared by 3D printing10.1016/j.jeurceramsoc.2020.11.050 ↗
18. Influence of debinding holding time on mechanical properties of 3D-printed alumina ceramic cores10.1016/j.ceramint.2020.10.061 ↗
19. Characterization of the wall effect of concrete via random packing of polydispersed superball-shaped aggregates10.1016/j.matchar.2019.06.024 ↗
20. Effect of particle size distribution and printing parameters on alumina ceramics prepared by Additive Manufacturing10.1016/j.ceramint.2023.11.365 ↗
21. Mechanical qualification and microstructural analysis of alumina produced by material extrusion10.1016/j.msea.2023.145456 ↗
22. Effect of the Particle Size Distribution of Irregular Al Powder on Properties of Parts for Electronics Fabricated by Binder Jetting10.3390/electronics12122733 ↗
23. Near zero shrinkage porous Al2O3 prepared via 3D-printing and reaction bonding10.1016/j.matlet.2015.02.037 ↗
24. Incorporating Nanoparticles in Alumina Ink for Improved Solid-Loading and Sinterability of Extrusion-Based 3D Printing10.1021/acsanm.2c03792 ↗
25. Extrusion-based 3D printing alumina-silica inks: Adjusting rheology and sinterability incorporating waste derived nanoparticles10.1016/j.jeurceramsoc.2023.03.068 ↗
26. SiC Nanoparticles Strengthened Alumina Ceramics Prepared by Extrusion Printing10.3390/ma16062483 ↗
27. Investigation on properties of Al2O3–SiO2 complex shaped refractory fabricated by layered extrusion forming10.1016/j.ceramint.2020.04.226 ↗
28. Surface Morphology in Selective Laser Melting of Metal Powders10.1016/j.phpro.2011.03.034 ↗
29. New sintered wollastonite glass-ceramic for biomedical applications10.1016/j.ceramint.2018.07.275 ↗
30. Spray drying and sintering of zirconia based hollow powders10.1016/j.powtec.2005.05.031 ↗
31. Quasi-static and dynamic response of 3D-printed alumina10.1016/j.jeurceramsoc.2018.03.006 ↗
32. Effect of parameters on 3D printing of alumina ceramics and evaluation of properties of sintered parts10.1080/21870764.2021.1920159 ↗
33. 3D printing of complex shaped alumina parts10.1016/j.ceramint.2018.07.153 ↗
34. Layered extrusion forming of complex ceramic structures using starch as removable support10.1016/j.ceramint.2019.07.193 ↗
35. A new method of zeta-potential measurement by the use of the sedimentation balance method10.1016/j.powtec.2012.12.011 ↗
36. Gelcasting of aluminum nitride ceramics using hydantion epoxy resin as gelling agent10.1016/j.ceramint.2013.05.060 ↗
37. Effect of particle size on additive manufacturing of complex architecture of silicon carbide10.1016/j.ceramint.2023.02.108 ↗
38. Effect of print path process on sintering behavior and thermal shock resistance of Al2O3 ceramics fabricated by 3D inkjet-printing10.1016/j.ceramint.2018.06.108 ↗
39. Extrusion‐based additive manufacturing of alumina ceramics through controlled extrusion pressure
40. Design and printing of proprioceptive three-dimensional architected robotic metamaterials10.1126/science.abn0090 ↗
41. G. Tarı̀, J. M. . Ferreira, Influence of solid loading on drying-Shrinkage behaviour of slip cast bodies, J. Eur. Ceramic Soc., vol. 18, no. 5, pp. 487–493, May 1998, doi: 10.1016/S0955-2219(97)00161-1.10.1016/S0955-2219(97)00161-1 ↗
42. The application of differential thermal analysis to the study of isothermal and non-isothermal crystallization kinetics of coal fly ash based glasses10.1016/j.jnoncrysol.2009.01.023 ↗
43. Dimensional retention of photocured ceramic units during 3D printing and sintering processes10.1016/j.ceramint.2020.12.233 ↗
44. Effect of particle size on three dimensional printed mesh structures10.1016/j.powtec.2008.12.011 ↗
45. Effect of size distribution on tapping properties of fine powder10.1016/S0032-5910(01)00294-7 ↗
46. 3D printing of highly-loaded slurries via layered extrusion forming: Parameters optimization and control
47. Quantitative characterization of defects in stereolithographic additive manufactured ceramic using X-ray computed tomography10.1016/j.jmst.2021.11.060 ↗
48. A review of defects in vat photopolymerization additive-manufactured ceramics: Characterization, control, and challenges10.1016/j.jeurceramsoc.2023.10.067 ↗