journal article·2025-01

Facile synthesis of Cu2O nano-microspheres anode for lithium-ion batteries

Xinghua Liang, Shuhong Yun, Shangfeng Tang, Yifei Zhao, Lihong Chen, Siying Li, Qicheng Hu

Publisher page

Abstract

Transition metal oxide anode materials exhibit high theoretical specific capacities and can meet the energy density requirements through reasonable design. In this work, a facile wet-chemical method to fabricate Cu 2O nano-microspheres anode for lithium-ion batteries with controllable size varied from 0.4 ∼ 1.2 μm is introduced, which basically using copper acetate as copper precursor and ascorbic acid as reducing agent. The solvent composition (DI water only or DI water:Ethanol = 1:1), solution alkalinity (amount of NaOH input), and synthesis temperature are investigated as factors affecting the size and morphology of Cu 2O nano-microspheres. The samples are characterized by X-ray diffraction, transmission electron microscope and scanning electron microscope. Nanoparticle cluster structure is observed in the reaction product with the bi-solvent system. With the optimized synthesis condition, the prepared Cu 2O anode (size of ∼ 455 ± 41 nm) delivers an initial discharge capacity of 539 mAh/g at a current density of 0.5C, 100 cycles of cyclic discharge at 0.5C with a capacity retention rate of 84.73 %. At the current density of 2C, the specific capacity is 347 mAh/g. Even at a large current density of 5C, the specific capacity is still as high as 219 mAh/g, indicating good rate capability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Copper-based nanomaterials and applications · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. An Efficient and Fast Li-Ion Battery Charging System Using Energy Harvesting or Conventional Sources10.1109/TIE.2018.2793243 ↗
2. From Solid-Solution Electrodes and the Rocking-Chair Concept to Today's Batteries10.1002/anie.201913923 ↗
3. X.L.J.J.o.M.S.; Technology. An advanced cathode composite for co-utilization of cations and anions in lithium batteries10.1016/j.jmst.2021.05.074 ↗
4. Flexible, Additive-Free, and Scalable Hard Carbon Paper Self-Interwoven by 1D Microbelts: Superb Room/Low-Temperature Sodium Storage and Working Mechanism10.1002/adma.201903125 ↗
5. Challenges for Rechargeable Li Batteries10.1021/cm901452z ↗
6. The Electrochemical Decomposition of Propylene Carbonate on Graphite10.1149/1.2407470 ↗
7. Access to long-lived room temperature phosphorescence through auration of 2,1,3-benzothiadiazole10.1039/D4DT00238E ↗
8. In situ-formed nitrogen-doped carbon/silicon-based materials as negative electrodes for lithium-ion batteries10.1016/j.jelechem.2021.115732 ↗
9. Efficient electrochemical synthesis of Cu3Si/Si hybrids as negative electrode material for lithium-ion battery10.1016/j.jallcom.2024.174996 ↗
10. Cycling performance and failure behavior of lithium-ion battery Silicon-Carbon composite electrode10.1016/j.jelechem.2024.118095 ↗
11. Recent progress and challenges in silicon-based anode materials for lithium-ion batteries10.1039/D3IM00115F ↗
12. Si-Based Anodes: Advances and Challenges in Li-Ion Batteries for Enhanced Stability10.1007/s41918-024-00214-z ↗
13. Employing Ni-Embedded Porous Graphitic Carbon Fibers for High-Efficiency Lithium-Sulfur Batteries10.1021/acsami.1c24755 ↗
14. Tactics to optimize conversion-type metal fluoride/sulfide/oxide cathodes toward advanced lithium metal batteries10.1007/s12274-023-5427-7 ↗
15. The Electrochemical Reduction of Co O in a Lithium Cell10.1149/1.1435358 ↗
16. A high-energy conversion-type cathode activated by amorpholization for Li rechargeable batteries10.1039/D2TA02167F ↗
17. Probing the role of the so-called inactive transition metal in conversion reactions: Not so inactive!
18. Recent Progress in Polyanionic Anode Materials for Li (Na)-Ion Batteries10.1007/s41918-021-00095-6 ↗
19. Nanoionics: ion transport and electrochemical storage in confi ned systems10.1038/nmat1513 ↗
20. Nanostructured Conversion-type Anode Materials for Advanced Lithium-Ion Batteries10.1016/j.chempr.2018.01.003 ↗
21. Scope and significance of transition metal oxide nanomaterials for next-generation Li-ion batteries10.1039/D3QM00226H ↗
22. Hierarchically Nanostructured Transition Metal Oxides for Lithium-Ion Batteries10.1002/advs.201700592 ↗
23. Effects of cation superstructure ordering on oxygen redox stability in O2-type lithium-rich layered oxides10.1039/D2EE03527H ↗
24. Hard carbons for sodium-ion batteries: Structure, analysis, sustainability, and electrochemistry10.1016/j.mattod.2018.12.040 ↗
25. Recent advances in transition metal oxides as anode materials for high-performance lithium-ion capacitors10.1016/j.cej.2024.154535 ↗
26. Graphene-encapsulated ZnO composites as high-performance anode materials for lithium ion batteries10.1007/s11581-019-03219-7 ↗
27. Constructing heterojunction-induced oxygen vacancies of N-doped carbon-encapsulated Sn/SnOx microplates for boosting lithium storage capability10.1016/j.cej.2024.152983 ↗
28. Design of multishell microsphere of transition metal oxides/carbon composites for lithium ion battery10.1016/j.cej.2019.122489 ↗
29. Recent Advances in Conversion-Type Electrode Materials for Post Lithium-Ion Batteries10.1021/acsmaterialslett.1c00043 ↗
30. Natural Activation of CuO to CuCl2 as a Cathode Material for Dual-Ion Lithium Metal Batteries10.1016/j.ensm.2021.06.022 ↗
31. Improving performance of device made up of CuO nanoparticles synthesized by hydrothermal over the reflux method10.1016/j.apsusc.2018.04.262 ↗
32. Probing on the hydrothermally synthesized iron oxide nanoparticles for ultra-capacitor applications10.1016/j.powtec.2014.12.021 ↗
33. Preparation of 3D nanoporous copper-supported cuprous oxide for high-performance lithium ion battery anodes10.1039/c2nr33383j ↗
34. Surfactant-free synthesis of Cu2O hollow spheres and their wavelength-dependent visible photocatalytic activities using LED lamps as cold light sources10.1186/1556-276X-9-624 ↗
35. Surface modified and size-controlled octahedral Cu2O nanostructured electrodes for lithium-ion batteries10.1016/j.jallcom.2019.04.225 ↗
36. Wet chemical synthesis and characterization of nanocrystalline ZnWO4 for application in Li-ion batteries10.1016/j.matchemphys.2017.12.074 ↗
37. Wet-Chemistry Synthesis of Carbon Nanostructures
38. The E factor 25 years on: the rise of green chemistry and sustainability10.1039/C6GC02157C ↗
39. Recent advances in green synthesized nanoparticles: from production to application
40. Research progress in toxicity of carbon quantum dots
41. Preparation methods of different nanomaterials for various potential applications: A Review10.1016/j.molstruc.2023.135148 ↗
42. Hollow Cu2O nanospheres with surface 111 and 110 active facets and intraluminal Cu2O nanoparticles as anode materials for high-performance lithium-ion batteries10.1016/j.jallcom.2022.166618 ↗
43. Facile Synthesis of Mesoporous Cu2O Microspheres with Improved Catalytic Property for Dimethyldichlorosilane Synthesis10.1021/ie2020747 ↗
44. Interior Structural Tailoring of Cu2O Shell-in-Shell Nanostructures through Multistep Ostwald Ripening10.1021/jp2059613 ↗
45. Facile Synthesis, Shape Evolution, and Photocatalytic Activity of Truncated Cuprous Oxide Octahedron Microcrystals with Hollows10.1021/cg900110u ↗
46. Hydrothermal Synthesis of Uniform Cuprous Oxide Microcrystals with Controlled Morphology10.1021/cg8003678 ↗
47. Nonpolar solute cononsolvency in ethanol/water mixtures – Connections to solvent structure10.1016/j.molliq.2019.111944 ↗
48. Morphological guidance and proportional control of Cu2O/ZnO core/shell heterojunction with enhanced visible-light-driven photocatalytic performance10.1007/s10853-022-08059-x ↗
49. From batch to flow: the effect of pH, current, and the crystal facets of Cu2O on electrochemical CO2 reduction10.1039/D4SE00130C ↗
50. Electrodeposition of Cu2O: growth, properties, and applications10.1007/s10008-017-3660-x ↗
51. Technologies for Removal of Hazardous Volatile Organic Compounds from Industrial Effluents and/or Potable Water Sources
52. Nucleation and Growth in Solution Synthesis of Nanostructures – from Fundamentals to Advanced Applications
53. Matched Ligands for Small, Stable Colloidal Nanoparticles of Copper, Cuprous Oxide and Cuprous Sulfide. Chemistry – A10.1002/chem.202300228 ↗
54. Effect of polar solvents on the growth, morphology and thermoelectric properties of Bi2Te3 nano particles10.1016/j.physe.2021.115072 ↗
55. Porous CuO@C composite as high-performance anode materials for lithium-ion batteries10.1039/D0DT02493G ↗
56. Wet chemical synthesis of ZnO nanocrystals: dependence of growth and morphology on the solvent composition10.1007/s10854-014-2009-9 ↗
57. Faceted Cu2O structures with enhanced Li-ion battery anode performances10.1039/C4CE02340D ↗
58. Role of alloying in Cu2O conversion anode for Li-ion batteries10.1007/s00214-018-2412-z ↗
59. Evaluation of the Structural Deviation of Cu/Cu2O Nanocomposite Using the X-ray Diffraction Analysis Methods10.3390/cryst12040566 ↗
60. Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges10.1039/D0MA00807A ↗
61. Quintuple-mode dynamic anti-counterfeiting using multi-mode persistent phosphors10.1039/D1TC04568G ↗
62. Review on recent progress of nanostructured anode materials for Li-ion batteries10.1016/j.jpowsour.2013.11.103 ↗
63. Phosphorus-Based Alloy Materials for Advanced Potassium-Ion Battery Anode10.1021/jacs.6b12185 ↗
64. Direct measurements of size-independent lithium diffusion and reaction times in individual polycrystalline battery particles10.1039/D3EE00953J ↗
65. Dynamic Elucidation of Lithium Insertion Reaction into MgMn2O4 Spinel10.1149/1945-7111/ac72c5 ↗
66. Hengwei Wang; Xiang-Kui Gu; Xusheng Zheng; Haibin Pan; Junfa Zhu; Si Chen; Lina Cao; Wei-Xue Li; Lu, J. Disentangling the size-dependent geometric and electronic effects of palladium nanocatalysts beyond selectivity. Science Advances 2019, 5, doi: 10.1126/sciadv.aat6413.10.1126/sciadv.aat6413 ↗
67. Effects of calcination temperature for rate capability of triple-shelled ZnFe2O4 hollow microspheres for lithium ion battery anodes10.1038/srep46378 ↗
68. Exploring Anomalous Charge Storage in Anode Materials for Next-Generation Li Rechargeable Batteries10.1021/acs.chemrev.9b00618 ↗
69. Surfaces/Interfaces Modification for Vacancies Enhancing Lithium Storage Capability of Cu2O Ultrasmall Nanocrystals10.1021/acsami.8b11592 ↗