journal article·2024-02Open access

Rapid preparation of nanoporous copper by transient joule heating vapor phase dealloying

Bao Lin, Yuhao Wang, Xiaoshi Hu, Wen Zhang, Haiying Qin

Abstract

In this paper, the effect of capacitor power sources on the preparation of copper nanoporous metals by brass vapor-phase dealloying (VPD) using a transient joule heating device was studied, and their performance as lithium-ion battery current collectors was tested. The results show that under the premise of similar heating temperatures, the increase of capacitance has promoted the dezincification of dealloyed samples, while the chemically active surface area (ECSA) increases first and then decreases, with a maximum increase of 317.6 times compared to the pristine sample. It is worth noting that the graphite electrode with joule-heated current collector has a specific capacity 15.7% higher than that of the commercial copper foil, but lower in rate performance. The transient joule-heat VPD method can quickly and conveniently prepare usable dealloyed copper nanoporous materials, which presented a great potential technique for bulk production on VPD technique.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanoporous metals and alloys · Anodic Oxide Films and Nanostructures · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Preparation and Characterization of Microbubbles with a Porous Ceramic Membrane
2. Hierarchical Mesoporous Carbon Nanosheets for Efficient Organic Pollutants Removal. Microporous Mesoporous Mater. 276 (2019) 251–259. 10.1016/j.micromeso.2018.10.008.10.1016/j.micromeso.2018.10.008 ↗
3. A Review of Recent Applications of Porous Metals and Metal Oxide in Energy Storage, Sensing and Catalysis10.1007/s10853-018-2961-5 ↗
4. Synthesis of Porous Silicon, Nickel and Carbon Layers by Vapor Phase Dealloying10.1016/j.surfcoat.2021.127812 ↗
5. Crystal Plane-Orientation Dependent Phase Evolution from Precursor to Porous Intermediate Phase in the Vapor Phase Dealloying of a Co-Zn Alloy10.1016/j.actamat.2022.118617 ↗
6. Preparation of Porous Silicon by Vacuum Sublimation Dealloying Method10.1016/j.vacuum.2023.112173 ↗
7. Vapor Phase Dealloying: A Versatile Approach for Fabricating 3D Porous Materials10.1016/j.actamat.2018.10.012 ↗
8. Spontaneous Evolution of Bicontinuous Nanostructures in Dealloyed Li-Based Systems10.1038/nmat3741 ↗
9. Evolution of Nanoporosity in Dealloying10.1038/35068529 ↗
10. Nanoporous Metals by Alloy Corrosion: Formation and Mechanical Properties10.1557/mrs2009.157 ↗
11. Nanoporous Metals by Dealloying Multicomponent Metallic Glasses10.1021/cm8009644 ↗
12. Dealloying by Metallic Melt10.1016/j.matlet.2011.01.054 ↗
13. Effect of Dealloying Temperature on Microstructure and Tensile Properties of Self-Supporting Nanoporous Copper Foil Fabricated in Situ
14. A. Chauvin, W. Txia Cha Heu, J. Buh, P.-Y. Tessier, A.-A. El Mel, Vapor Dealloying of Ultra-Thin Films: A Promising Concept for the Fabrication of Highly Flexible Transparent Conductive Metal Nanomesh Electrodes, npj Flex Electron 3 (1) (2019) 5. 10.1038/s41528-019-0049-1.10.1038/s41528-019-0049-1 ↗
15. Bulk Diffusion Regulated Nanopore Formation during Vapor Phase Dealloying of a Zn-Cu Alloy10.1016/j.actamat.2022.118210 ↗
16. Preparation of Porous Cu Material Using Vapor Phase Dealloying10.1016/j.matlet.2022.133486 ↗
17. Primary and Secondary Dealloying of Au (Pt)-Ag: Structural and Compositional Evolutions, and Volume Shrinkage10.1149/2.0131412jes ↗
18. Dealloying and Dealloyed Materials10.1146/annurev-matsci-070115-031739 ↗
19. Three-Dimensional Bicontinuous Nanoporous Materials by Vapor Phase Dealloying10.1038/s41467-017-02167-y ↗
20. P.K. Du, Z. Sun, X.W. Fan, Y.Z. Tang, Y.F. Huang, K.M. Yu, P. Wang, Y.H. Tan, N. Song, Y. Liu, Preparation of Nanoporous Copper Foil by Chemical Dealloying from Electro-Deposited CuZn Alloy, Trans. Instit. Met. Finishing: Int. J. Surface Eng. Coatings No. 3 (2022) 100. 10.1080/00202967.2021.2022836.10.1080/00202967.2021.2022836 ↗
21. S.M. Musa, Book Review Fundamentals of Electric Circuits by Charles K. Alexander and Matthew N. O. Sadiku (McGraw Hill, 4th Edition, 2009). 2008, 9 (1).
22. Separating Zinc from Copper and Zinc Mixed Particles Using Vacuum Sublimation10.1016/j.seppur.2009.06.009 ↗
23. Surface cracking and melting behavior of tungsten-vanadium alloys under thermal shock
24. Jialian Zhang, Faliang Li, Haijun Zhang, Research Progress on Preparation of Metallic Materials by Selective Laser Melting, Laser Optoelectron. Prog. 56 (10) (2019) 100003. 10.3788/LOP56.100003.10.3788/LOP56.100003 ↗
25. H.-G. U, J.-C. Hong, S.-I. Kim, S.-G. Jang, Y.-C. Ju, S.-C. Kim, Fabrication of Low Defect Multi-Layer Graphene Using Electrochemical Intercalation of Graphite Electrode and Its Application for Graphene/Al Nanocomposites, Chem. Phys. Lett. 2023, 140592. 10.1016/j.cplett.2023.140592.10.1016/j.cplett.2023.140592 ↗
26. Comparative Study of Density Functionals for the Description of Lithium-graphite Intercalation Compounds10.1002/jcc.26017 ↗
27. Defect-Mediated Leakage in Lithium Intercalated Bilayer Graphene10.1063/1.4980052 ↗
28. A Theoretical Model to Determine Intercalation Entropy and Enthalpy: Application to Lithium/Graphite10.1016/j.elecom.2016.02.003 ↗
29. Lithium-Intercalated Graphene Interconnects: Prospects for On-Chip Applications10.1109/JEDS.2016.2614813 ↗