journal article·2024-12Open access

3D printed CuZnAl2O3-based catalysts for direct CO2 hydrogenation to DME, optimization and scale up

Yoran De Vos, Arie J.J. Koekkoek, Giuseppe Bonura, Serena Todaro, Monika Kus, Alexander Vansant, Gijsbert Gerritsen, Catia Cannilla, Hendrikus C.L. Abbenhuis, Vesna Middelkoop

Abstract

• Design of experiment study of parameters aided desired improvement of 3D printing process. • Both acid and PEI binder affected the pH of the printing paste and the specific surface area. • Lower pH values, result in zeolite degradation (dealumination) and possible CZA-dissolution. • Catalytic testing of double monolith reactor shows increased conversion and yield. • Selectivity for DME decreases with temperature (60–30 % 240–290 °C). This work reports the development, optimization and subsequent scale-up of 3D printed catalyst structures for direct CO 2 hydrogenation to DME. To ensure compatibility between the used Cu-ZnO-Al 2 O 3 (CZA) catalyst and the acid form H-ZSM-5 co-catalyst, a new binary polymeric binder system, based on polyethyleneimine (PEI) and methylcellulose (MC), was selected. The 3D-printing paste composition was optimized through 2 successive Design of Experiments (DOE) to achieve (i) good textural properties that ensure catalytic activity and (ii) improved mechanical integrity and printability. The DOE unveiled the critical link between the pH of the printing paste and the preservation of textural properties and catalytical activity of the printed catalysts. Finally, the successful scale-up of the 3D-printed catalyst structures was demonstrated using the optimized printing paste, and the performance of the final catalysts was evaluated by catalytic testing and accompanied X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) analyses.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Catalysts for Methane Reforming · Carbon dioxide utilization in catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Towards oil independence through renewable methanol chemistry10.1002/anie.201204995 ↗
2. Olah · 2009
3. CO2 recycling: a key strategy to introduce green energy in the chemical production chain10.1002/cssc.201300926 ↗
4. Perspective on CO2 hydrogenation for dimethyl ether economy10.3390/catal12111375 ↗
5. Noelia Mota, Elena Millán Ordoñez, Bárbara Pawelec, José Luis G. Fierro, Rufino M. Navarro, Direct synthesis of Dimethyl Ether from CO2: recent advances in bifunctional/hybrid catalytic systems, Catalysts 11(4) (2021) 411. doi: 10.3390/catal11040411.10.3390/catal11040411 ↗
6. Giuseppe Bonura, Serena Todaro, Catia Cannilla, Francesco Frusteri, CO2 hydrogenation into dimethyl ether Conventional and innovative catalytic routes in The Carbon Chain in Carbon Dioxide Industrial Utilization Technologies, 2022, CRC Press.10.1201/9781003336587-5 ↗
7. Design of packed bed reactors: Guides to catalyst shape, size and loading selection10.1016/S1359-4311(00)00072-7 ↗
8. Packed bed pressure drop dependence on particle shape, size distribution, packing arrangement and roughness10.1016/j.powtec.2013.06.022 ↗
9. M. Frey, D. Édouard, A.-C. Roger, Optimization of structured cellular foam-based catalysts for low-temperature carbon dioxide methanation in a platelet milli-reactor, Comptes Rendus Chim. 18 (2015) 283–292.10.1016/j.crci.2015.01.002 ↗
10. Scale-up of innovative honeycomb reactors for power-to-gas applications – The Project Store & Go10.1002/cite.201700139 ↗
11. Scaling up of 3D printed and Ni/Al2O3 coated reactors for CO2 methanation10.1039/C9RE00092E ↗
12. Washcoating and chemical testing of a commercial Cu/ZnO/Al2O3 catalyst for the methanol synthesis over copper open-cell foams10.1016/j.apcata.2014.05.005 ↗
13. Structuring Cu/ZnO/Al2O3 catalyst for methanol synthesis: slurry additive effect in the washcoating method
14. Next frontiers in cleaner synthesis: 3D printed graphene-supported CeZrLa mixed-oxide nanocatalyst for CO2 utilisation and direct propylene carbonate production10.1016/j.jclepro.2018.12.274 ↗
15. Multi-scale studies of 3D Printed Mn–Na–W/SiO2 catalyst for oxidative coupling of methane10.3390/catal11030290 ↗
16. 3D printed catalytic reactors for aerobic selective oxidation of benzyl alcohol into benzaldehyde in continuous multiphase flow
17. C.R. Tubío, J. Azuaje, L. Escalante, A. Coelho, F. Guitián, E. Sotelo, A. Gil, 3D printing of a heterogeneous copper-based catalyst. J. Catal. 334 (2016) 110–115.10.1016/j.jcat.2015.11.019 ↗
18. 3D printed Ni/Al2O3 based catalysts for CO2 methanation: a comparative and operando XRDCT study10.1016/j.jcou.2019.07.013 ↗
19. Clement Jacquot, Antonis Vamvakeros, Andraž Pavlišič, Stephen W.T. Price, Hongyang Dong, Dorota Matras, Lidia Protasova, Blaž Likozar, Simon D.M. Jacques, Andrew M. Beale, Vesna Middelkoop, A multi-scale study of 3D printed Co-Al2O3 catalyst monoliths versus spheres, Chem. Eng. J. Adv. 16 (2023) 100538.10.1016/j.ceja.2023.100538 ↗
20. Leon R.S. Rosseau, Vesna Middelkoop, Hans A.M. Willemsen, Ivo Roghair, M. Van Sint Annaland, Review on Additive Manufacturing of Catalysts and Sorbents and the Potential for Process Intensification, Front. Chem. Eng., 2022, Materials Process Engineering, https://doi.org/10.3389/fceng.2022.834547.10.3389/fceng.2022.834547 ↗
21. Additive manufacturing methods and modelling approaches: a critical review10.1007/s00170-015-7576-2 ↗
22. Recent advances in 3D printing of structured materials for adsorption and catalysis applications10.1021/acs.chemrev.1c00060 ↗
23. Three-dimensional printing for catalytic applications: current status and perspectives10.1002/adfm.201701134 ↗
24. 3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors10.1039/C7CS00631D ↗
25. Preparation of excellent performance ZTA ceramics and complex shaped components using digital light processing 3D printing technology10.1016/j.jallcom.2024.173640 ↗
26. Advances on direct selective laser printing of ceramics: An overview10.1016/j.jallcom.2023.172821 ↗
27. Manufacturing technologies for nanocomposite ceramic structural materials and coatings10.1016/j.mseb.2007.09.066 ↗
28. Hattel Ceramic tape casting: A review of current methods and trends with emphasis on rheological behaviour and flow
29. Rheological characterisation of ceramic inks for 3D direct ink writing: A review10.1016/j.jeurceramsoc.2021.08.031 ↗
30. Effectiveness of the 3D-printing procedure in the synthesis of hybrid catalysts for the direct hydrogenation of CO2 into dimethyl ether10.1016/j.jcou.2023.102458 ↗