journal article·2024-02

Microstructure and nonlinear electrical properties in Na2CO3-ZnO varistor ceramics

Jingjing Tian, Yelin Wu, Heng Tian, Yonghao Xu, Jiayang Zhao, Pengzhen Lu, Bo Zhang, Guodong Wang

Publisher page

Abstract

Herein, (1-x)ZnO + xNa 2CO 3 (x = 0, 0.5, 1.0, and 1.5 mol%) varistor ceramics were prepared via conventional solid-state sintering at a low sintering temperature of 900 ℃. The microstructure and electrical properties of these varistor ceramics were systematically investigated as a function of Na 2CO 3 concentration. Results revealed that the prepared varistor ceramics exhibit the hexagonal structure without a secondary phase. The increase of Na 2CO 3 concentration promotes the ZnO grain growth. Owing to an increasement in the barrier height at the grain boundaries, the nonlinear electrical properties of the ceramics considerably improve with increasing Na 2CO 3 concentration. The optimal composition of 98.5 mol%ZnO + 1.5 mol%Na 2CO 3 corresponds to a nonlinear coefficient of 3.55, leakage current density of 450 μA/cm 2, breakdown strength of 241.2 V/mm, and barrier height of 0.57 eV. Moreover, the dielectric properties of the varistor ceramics are considerably affected by Na 2CO 3 concentration.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Novel Ultrahigh-Performance ZnO-Based Varistor Ceramics10.1021/acsami.1c07735 ↗
2. Effects of Fe and Al co-doping on the leakage current density and clamp voltage ratio of ZnO varistor10.1016/j.jallcom.2018.03.106 ↗
3. High Nonlinearity and High Voltage Gradient ZnO Varistor Ceramics Tailored by Combining Ga2O3, Al2O3, and Y2O3 Dopants10.1111/jace.14110 ↗
4. High voltage gradient and low residual-voltage ZnO varistor ceramics tailored by doping with In2O3 and Al2O310.1016/j.ceramint.2016.09.032 ↗
5. A Grain-Boundary Defect Model for Instability/Stability of a ZnO Varistor10.1007/BF01113755 ↗
6. The effect of SiO2 on electrical properties of low-temperature-sintered ZnO-Bi2O3-TiO2-Co2O3-MnO2-based ceramics10.1111/jace.14575 ↗
7. Electrical impedance spectroscopy and structural characterization of liquid-phase sintered ZnO-V2O5-Nb2O5 varistor ceramics doped with MnO10.1016/j.ceramint.2016.03.057 ↗
8. Influence of Cr2O3 doping on the electrical characteristics of novel ZnO-Cr2O3-based varistor ceramics10.1016/j.materresbull.2022.112111 ↗
9. B2O3- and Y2O3-doped ZnO varistor ceramics: Enhanced voltage gradient and nonlinear properties for UHV10.1016/j.mssp.2020.105590 ↗
10. An economical dopant for improving the comprehensive electrical properties of ZnO varistor ceramics10.1016/j.matlet.2020.128471 ↗
11. Microstructural and electrical characteristics of rare earth oxides doped ZnO varistor films10.1063/1.5016085 ↗
12. Influence of SiO2 on electrical properties of the highly nonlinear ZnO-Bi2O3-MnO2 varistors10.1016/j.jeurceramsoc.2017.05.014 ↗
13. Effect of La2O3 doping on microstructure and electrical properties of flash-sintered ZnO-Bi2O3 varistor10.1007/s10854-022-09105-9 ↗
14. Na-doped ZnO nanorods fabricated by chemical vapor deposition and their optoelectrical properties10.1016/j.jallcom.2016.08.100 ↗
15. Effects of Na Doping on Structural, Optical, and Electronic Properties of ZnO Thin Films Fabricated by Sol-Gel Technique10.1007/s11664-018-6258-x ↗
16. Sol-gel production of p-type ZnO thin film by using sodium doping10.1016/j.spmi.2016.05.011 ↗
17. Analysis of Electrical and Impedance Properties of the Group-I (Li, Na, K & Cs) Doped ZnO Nanorods10.1007/s11664-021-09240-9 ↗
18. Influences of lithium on the defect structures and electrical properties of ZnO–Bi2O3 based varistors10.1007/s10854-017-7239-1 ↗
19. p-Type ZnO materials: Theory, growth, properties, and devices10.1016/j.pmatsci.2013.03.002 ↗
20. P-Type ZnO nanowires: From synthesis to nanoenergy10.1016/j.nanoen.2011.12.004 ↗
21. Effect of Na doping on microstructures, optical and electrical properties of ZnO thin films grown by sol-gel method10.1016/j.jallcom.2021.160554 ↗
22. Influence of alkali ions in enhancing the nonlinearity of ZnO-Bi2O3-Co3O4 varistor ceramics10.1143/JJAP.34.6125 ↗
23. The clamp characteristics and DC aging behavior of ZnO-based varistor ceramics doped with Na2CO310.1016/j.ceramint.2015.09.069 ↗
24. Boron and sodium co-doped ZnO varistor with high stability of pulse current surge10.1016/j.jallcom.2017.08.280 ↗
25. Cold sintering ZnO based varistor ceramics with controlled grain growth to realize superior breakdown electric field10.1016/j.jeurceramsoc.2020.09.023 ↗
26. A low leakage current (Co, Mn, Ta)-SnO2 varistor tailored by doping with chromium for power grids10.1016/j.rinp.2020.103314 ↗
27. Low temperature sintering and characterization of 0.25-1 mol% Bi2O3 doped ZnBiMnNbO based varistor ceramics10.1016/j.ceramint.2021.05.050 ↗
28. The influence of ZrO2 doping on microstructure and electrical properties of ZnO-based conductive ceramics10.1016/j.ceramint.2021.05.223 ↗
29. Improved stability of the ZnO varistor via donor and acceptor doping at the grain boundary10.1557/JMR.1988.0745 ↗
30. Effects of Sb doping on the electrical characteristics of Ta-doped SnO2 varistors10.1016/j.vacuum.2023.111983 ↗
31. A unique tuning effect of Mg on grain boundaries and grains of ZnO varistor ceramics10.1016/j.jeurceramsoc.2020.12.024 ↗
32. The transition from non-ohmic to ohmic characteristics in La2O3 doped ZnO-MgO-TiO2 linear resistance ceramics10.1016/j.ceramint.2022.01.268 ↗
33. The effect of SiO2 on electrical properties of low-temperature-sintered ZnO-Bi2O3-TiO2-Co2O3- MnO2-based ceramics10.1111/jace.14575 ↗