journal article·2023-12

Core-shell-shell nanocomposites structured polyaniline-rGO coated copolymer of NiFe2O4@poly(aniline-co-pyrrole) for sensitive Co2+ detection

Dina F. Katowah, M.M. Alam, Fahad Alhashmi Alamer, Mahmoud A. Hussein, Abdullah M. Asiri, Ahmed H. Sadek, Mohammed M. Rahman

Publisher page

Abstract

A two-step in situ chemical polymerization approach that involved the simple in-situ oxidative polymerization of (ANI-co-Py) as a copolymer on NF nanoparticle NPs, followed by the succeeding in-situ oxidative polymerization of ANI-rGO on the P(ANI-co-Py)/NF core–shell structure, has successfully obtained a shell of polyaniline (PANI)- reduced graphene oxide (rGO) on poly(aniline-co-pyrrole)/NiFe 2O 4/P(ANI-co-Py)/NF core–shell. The resulting PANI-rGO/P(ANI-co-Py)/NF NCs consist of NiFe 2O 4 nanoparticles that acted as the “core” surrounding conducting copolymers, while the intermediate rGO serves as the bridge network connecting the copolymer and PANI, offering good structural stability as well as an effective electron transfer pathway. Moreover, the produced nanocomposite NCs also exhibit the core shell-shell structure with the features of electrode materials. A reliable sensor selective to Co 2+ ion has been developed based on the high structural and compositional properties of the as-obtained PANI-rGO/P(ANI-co-Py)/NF NCs. Where a glassy carbon electrode (GCE) was coated by a slurry of synthesized PANI-rGO/P(ANI-co-Py)/NF NCs, which was stabilized using a suspension of Nafion (5 % suspension in ethanol) as a binding agent. A calibration curve of the current data and the corresponding concentrations of Co 2+ ions have been established. From the calibration curve, the reliability of the linear dynamic range (0.1 nM–0.01 mM), the sensor sensitivity (204.2658 µA.µM −1.cm −2), and the lower limit of detection (99.27 ± 4.96 pM) have evaluated. Finally, the designed sensor was subjected to examining real environmental samples, where the fabricated sensor exhibited a successful high reproducibility. Recently, the development of sensors based on nanocomposites of organometallic on GCE has become key in the field of sensor development. The simple rapid synthesis of the PANI-rGO/P(ANI-co-Py)/NF NCs sensor will considerably contribute to the field of sensor management. In addition, the good performance of the PANI-rGO/P(ANI-co-Py)/NF NCs electrodes has drawn attention to them as promising electrode materials for high-performance sensors.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Electrochemical sensors and biosensors · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (92)

Show source-provided references
1. Polypyrrole-based optical probe for a hydrogen peroxide assay10.1021/ac0608319 ↗
2. Kohlman · 1998 · 85
3. Electrochemical sensors based on organic conjugated polymers10.3390/s8010118 ↗
4. Progress on the morphological control of conductive network in conductive polymer composites and the use as electroactive multifunctional materials10.1016/j.progpolymsci.2013.07.007 ↗
5. A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites10.1016/j.progpolymsci.2010.11.003 ↗
6. Conductive polymer composites with segregated structures10.1016/j.progpolymsci.2014.07.007 ↗
7. Vanadium flow battery for energy storage: prospects and challenges10.1021/jz4001032 ↗
8. Carbon black/polystyrene composites as candidates for gas sensing materials10.1016/S0008-6223(03)00273-2 ↗
9. Polypyrrole-titania nanocomposites derived from different oxidants10.1149/2.048111jes ↗
10. Polyaniline nanofiber composites with amines: Novel materials for phosgene detection10.1007/s12274-009-9011-1 ↗
11. The synthesis of highly electroactive N-doped carbon nanotube/polyaniline/Au nanocomposites and their application to the biosensor10.1016/j.synthmet.2011.06.039 ↗
12. Nanoparticle networks reduce the flammability of polymer nanocomposites10.1038/nmat1502 ↗
13. Electrocatalysis of sandwich-structured Pd/polypyrrole/Pd composites toward formic acid oxidation10.1021/ie102392n ↗
14. Aligned carbon nanotube− polymer hybrid architectures for diverse flexible electronic applications10.1021/nl052238x ↗
15. Preparation, characterization and electrochemistry of Layer-by-Layer films of silver nanoparticles and silsesquioxane polymer10.1016/j.colsurfa.2016.09.061 ↗
16. Effect of doping with nickel ions on the electrical properties of poly (aniline-co-o-anthranilic acid) and doped copolymer as precursor of NiO nanoparticles10.1007/s10904-015-0199-0 ↗
17. Synthesis, structural and optical properties of Eskolaite nanoparticles derived from Cr doped polyanthranilic acid (CrPANA)10.1016/j.molstruc.2016.05.071 ↗
18. Conducting polymers. VII. Effect of doping with iodine on the dielectrical and electrical conduction properties of polyaniline10.1080/15533174.2015.1004435 ↗
19. Nano-Fe 2 O 3-catalyzed direct borylation of arenes10.1039/b926945b ↗
20. Cobalt–iron magnetic composites as heterogeneous catalysts for the aerobic oxidation of thiols under alkali free conditions10.1016/j.apcata.2010.11.004 ↗
21. Nano Fe3O4 as magnetically recyclable catalyst for the synthesis of α-aminophosphonates in solvent-free conditions10.1016/j.tetlet.2011.01.074 ↗
22. Mesoporous zinc ferrite: synthesis, characterization, and photocatalytic activity with H2O2/visible light10.1016/j.jhazmat.2011.10.006 ↗
23. Fe3O4 nanoparticles: A powerful and magnetically recoverable catalyst for the synthesis of novel calix [4] resorcinarenes10.1016/j.cclet.2011.11.005 ↗
24. Amperometric tyrosinase biosensor based on Fe3O4 nanoparticles–chitosan nanocomposite10.1016/j.bios.2008.02.014 ↗
25. Templated fabrication of NiFe2O4 nanorods: characterization, magnetic and electrochemical properties10.1016/j.solidstatesciences.2008.05.001 ↗
26. Electrical and magnetic characterization of nanocrystalline Ni–Zn ferrite synthesis by co-precipitation route10.1016/j.jmmm.2007.05.032 ↗
27. Ferrite thin films: Synthesis, characterization and gas sensing properties towards liquid petroleum gas
28. Simultaneous determination of guanine and adenine in DNA based on NiFe2O4 magnetic nanoparticles decorated MWCNTs as a novel electrochemical sensor using adsorptive stripping voltammetry10.1016/j.snb.2012.11.028 ↗
29. Multiwall carbon nanotubes decorated with NiFe2O4 magnetic nanoparticles, a new catalyst for voltammetric determination of cefixime10.1016/j.colsurfb.2012.09.037 ↗
30. High-performance room temperature NH3 gas sensors based on polyaniline-reduced graphene oxide nanocomposite sensitive membrane10.1016/j.jallcom.2019.03.124 ↗
31. Reduced graphene oxide–polyaniline hybrid: preparation, characterization and its applications for ammonia gas sensing10.1039/c2jm34340a ↗
32. Flexible, highly conductive, and free-standing reduced graphene oxide/polypyrrole/cellulose hybrid papers for supercapacitor electrodes10.1039/C6TA04844G ↗
33. Understanding the pH-dependent behaviour of graphene oxide aqueous solutions on organic photovoltaic performance10.1016/j.solmat.2019.01.045 ↗
34. Reduced graphene oxide (rGO) decorated TiO2 microspheres for selective room-temperature gas sensors10.1016/j.snb.2016.02.069 ↗
35. A field effect transistor modified with reduced graphene oxide for immunodetection of Ebola virus10.1007/s00604-019-3256-5 ↗
36. Ultrafast and sensitive room temperature NH3 gas sensors based on chemically reduced graphene oxide10.1088/0957-4484/25/2/025502 ↗
37. Nanostructured materials for room-temperature gas sensors10.1002/adma.201503825 ↗
38. Recent advances in graphene based gas sensors10.1016/j.snb.2015.04.062 ↗
39. Extraction of nickel and cobalt from nickeliferous limonitic laterite ore using borax containing slags10.1016/j.minpro.2017.07.012 ↗
40. Simultaneous determination of cobalt and nickel in vitamin B12 samples using high-resolution continuum source atomic absorption spectrometry10.1016/j.talanta.2015.09.073 ↗
41. Adsorptive removal of cobalt from aqueous solution by utilizing lemon peel as biosorbent10.1016/j.bej.2009.10.005 ↗
42. Ecotoxicity of cobalt to the springtail Folsomia candida
44. Health risks associated with cobalt exposure—an overview10.1016/0048-9697(94)90125-2 ↗
45. Dispositiion, toxicity, and intestinal absorption of cobaltous chloride in male Fischer 344 rats
46. Erythropoietic effect of cobalt in patients with or without anemia10.1056/NEJM194905122401903 ↗
47. Cobalt asthma—a case series from a cobalt plant10.1093/occmed/kqq023 ↗
48. Experimental research into the pathogenesis of cobalt/hard metal lung disease10.1183/09031936.96.09051024 ↗
49. Toxicity of cobalt oxide nanoparticles to normal cells; an in vitro and in vivo study10.1016/j.cbi.2014.11.016 ↗
50. Cytokine and NO release from peripheral blood neutrophils after exposure to metal nanoparticles: in vitro and ex vivo studies10.1080/17435390802112874 ↗
51. The pro-inflammatory effects of low-toxicity low-solubility particles, nanoparticles and fine particles, on epithelial cells in vitro: the role of surface area10.1136/oem.2005.024802 ↗
52. The effect of nano-and micron-sized particles of cobalt–chromium alloy on human fibroblasts in vitro10.1016/j.biomaterials.2007.02.034 ↗
53. Genotoxicity and morphological transformation induced by cobalt nanoparticles and cobalt chloride: an in vitro study in Balb/3T3 mouse fibroblasts10.1093/mutage/gep027 ↗
54. Effects of nano-scaled particles on endothelial cell function in vitro: studies on viability, proliferation and inflammation10.1023/B:JMSM.0000021095.36878.1b ↗
55. Cobalt nano-particles modulate cytokine in vitro release by human mononuclear cells mimicking autoimmune disease
56. Selective Fabrication of an Electrochemical Sensor for Pb2+ Based on Poly (pyrrole-co-o–toluidine)/CoFe2O4 Nanocomposites10.1002/slct.201902714 ↗
57. Surfactant-assisted graphene oxide/methylaniline nanocomposites for lead ionic sensor development for the environmental remediation in real sample matrices10.1007/s13762-019-02447-8 ↗
58. Fabrication of selective and sensitive Pb2+ detection by 2, 2′-(−(1, 2-phenylenebis (azaneylylidene)) bis (methaneylylidene)) diphenol by electrochemical approach for environmental remediation10.1016/j.molliq.2019.02.109 ↗
59. SDBS-functionalized MWCNT/poly (o-toluidine) nanowires modified glassy carbon electrode as a selective sensing platform for Ce3+ in real samples10.1016/j.molliq.2019.01.159 ↗
60. Poly (pyrrole-co-o-toluidine) wrapped CoFe 2 O 4/R (GO–OXSWCNTs) ternary composite material for Ga 3+ sensing ability10.1039/C9RA03593A ↗
61. Designed network of ternary core-shell PPCOT/NiFe2O4/C-SWCNTs nanocomposites. A Selective Fe3+ ionic sensor10.1016/j.jallcom.2020.155020 ↗
62. Graphene oxide synthesized by using modified hummers approach
63. Physicochemical and morphological properties of poly(aniline-co-pyrrole)10.1007/s10853-010-4351-5 ↗
64. Comparative study on doping of polyaniline with graphene and multi-walled carbon nanotubes10.1007/s40097-017-0217-6 ↗
65. Synthesis and physico-chemical property evaluation of PANI–NiFe2O4 nanocomposite as electrodes for supercapacitors10.1016/j.jallcom.2012.11.122 ↗
66. Preparation and enhanced electrochemical properties of nano-sulfur/poly (pyrrole-co-aniline) cathode material for lithium/sulfur batteries10.1016/j.electacta.2010.03.030 ↗
67. Electrochemical deposition of polyaniline–polypyrrole composite coatings on aluminum10.1002/app.10123 ↗
68. Oxidative synthesis and electrochemical studies of poly (aniline-co-pyrrole)-hybrid carbon nanostructured composite electrode materials for supercapacitor10.5185/amlett.2015.5690 ↗
69. Copolymers of aniline with o-and m-toluidine: synthesis and characterization10.1002/pi.1316 ↗
70. Preparation of NiFe2O4 architectures for affinity separation of histidine-tagged proteins10.1016/j.matlet.2015.01.039 ↗
71. Self-assembly and embedding of nanoparticles by in situ reduced graphene for preparation of a 3D graphene/nanoparticle aerogel10.1002/adma.201102838 ↗
72. Large-scale growth and characterizations of nitrogen-doped monolayer graphene sheets10.1021/nn200766e ↗
73. Synthesis, characterization, and microwave absorption properties of reduced graphene oxide/strontium ferrite/polyaniline nanocomposites10.1186/s11671-016-1340-x ↗
74. Preparation and characterization of polyaniline/multi-walled carbon nanotube composites10.1016/j.carbon.2004.10.043 ↗
75. Polyaniline/magnetic ferrite nanocomposites obtained by in situ polymerization10.1016/j.reactfunctpolym.2007.10.010 ↗
76. Ternary nanocomposite based poly (pyrrole-co-O-toluidine), cobalt ferrite and decorated chitosan as a selective Co2+ cationic sensor10.1016/j.compositesb.2019.107175 ↗
77. Fabrication of conductive cross-linked polyaniline/G-MWCNTS core-shell nanocomposite: a selective sensor for trace determination of chlorophenol in water samples10.1002/pat.4988 ↗
78. Network structure-based decorated CPA@ CuO hybrid nanocomposite for methyl orange environmental remediation
79. Nanocomposite containing cross-linked poly (methyl-methacrylate)/multiwall carbon nanotube as a selective Y3+ sensor probe10.1002/pc.25118 ↗
80. Nanocomposites-based nitrated polyethersulfone and doped ZnYNiO for selective As3+ sensor application10.1002/adv.22153 ↗
81. Development of Cd2+ sensor based on BZNA/Nafion/Glassy carbon electrode by electrochemical approach10.1016/j.cej.2018.07.034 ↗
82. Functionalized polyethersulfone as PES-NH2-metal oxide nanofilers for the detection of Y3+10.1007/s00289-018-2612-7 ↗
83. Nanocomposite based functionalized Polyethersulfone and conjugated ternary ZnYCdO nanomaterials for the fabrication of selective Cd2+ sensor probe10.1007/s10965-018-1643-y ↗
84. Hybride ZnCdCrO embedded aminated polyethersulfone nanocomposites for the development of Hg2+ ionic sensor10.1088/2053-1591/aac681 ↗
85. Synthesis of novel pyrazole incorporating a coumarin moiety (PC) for selective and sensitive Co 2+ detection10.1039/C9NJ02176K ↗
86. In-situ Glycine Sensor Development Based ZnO/Al2O3/Cr2O3 Nanoparticles10.1002/slct.201802750 ↗
87. Development of an efficient phenolic sensor based on facile Ag 2 O/Sb 2 O 3 nanoparticles for environmental safety10.1039/C8NA00034D ↗
88. Fabrication of 1, 2-dichlorobenzene sensor based on mesoporous MCM-41 material10.1016/j.colsurfa.2018.11.024 ↗
89. One-step wet-chemical synthesis of ternary ZnO/CuO/Co 3 O 4 nanoparticles for sensitive and selective melamine sensor development10.1039/C8NJ06361C ↗
90. Detection of uric acid based on doped ZnO/Ag 2 O/Co 3 O 4 nanoparticle loaded glassy carbon electrode10.1039/C9NJ01287G ↗
91. Development of selective Co2+ ionic sensor based on various derivatives of benzenesulfonohydrazide (BSH) compound: An electrochemical approach10.1016/j.cej.2018.01.130 ↗
92. Development of highly efficient Co2+ ions sensor based on N, N′-(ethane-1, 2-diyl) bis (2, 5-dimethoxybenzenesulfonamide)(EBDMBS) fabricated glassy carbon electrode10.1016/j.jorganchem.2016.08.010 ↗