Novel NiO surface coating on LiCoO2 cathode for Li-ion batteries
Source abstract
Abstract
Crystalline LiCoO 2 nanoparticles were coated with NiO nanocrystals. The coating was made using a one-pot strategy by solution combustion synthesis with different weight percentages. The method used is simple, economical, and easily scalable. The resulting materials were characterized morphologically, structurally, and electrochemically by transmission and scanning electron microscopy, charge/discharge cycles, rate capability, voltammetry, and electrochemical impedance spectroscopy techniques. The results showed that a uniform coating with crystalline NiO nanoparticles on the LiCoO 2 was obtained. For optimal coating, the discharge capacity reached 74 % retention after 100 cycles between 3.0 and 4.5 V at 0.1 C, while the uncoated material retained only 5 % of its initial capacity. Thus, the introduced NiO coating protects the LiCoO 2 electrode against the unwanted reactions that occur in contact with the electrolyte at high voltage. Therefore, the irreversible loss of the active material capacity will be minimized.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Comparative study of Al2O3-coated LiCoO2 electrode derived from different Al precursors: uniformity, microstructure and electrochemical properties10.1016/j.electacta.2015.08.039 ↗
2. Preparation of LiCoO2 thin film consisting of nanosize particles on carbon substrate with the rugged surface via electrodeposition10.1016/j.ssi.2015.09.026 ↗
3. Enhanced high-voltage properties of LiCoO2 coated with Li[Li_0.2Mn_0.6Ni_0.2]O210.1016/j.electacta.2014.10.072 ↗
4. In-situ coating of cathode by electrolyte additive for high-voltage performance of lithium-ion batteries10.1016/j.electacta.2014.12.143 ↗
5. Improved electrochemical performance of LiCoO2 electrodes with ZnO coating by radio frequency magnetron sputtering10.1021/am503260s ↗
6. Vapor-assisted synthesis of Al2O3-coated LiCoO2 for high-voltage lithium ion batteries10.1016/j.electacta.2015.05.180 ↗
7. Sputtering TiO2 on LiCoO2 cell composite electrodes as a simple and effective coating to enhance high-voltage cathode performance
8. Electrochemical effect of lithium tungsten oxide modification on LiCoO2 thin film electrode10.1016/j.jpowsour.2015.03.108 ↗
9. Characterization of mgo-coated-LiCoO2 particles by analytical transmission electron microscopy10.1016/j.jpowsour.2016.07.116 ↗
10. Novel LiCoO2 cathode material with Al2O3 coating for a Li ion cell10.1021/cm000511k ↗
11. Effect of Al2O3 coating on electrochemical performance of LiCoO2 as cathode materials for secondary lithium batteries10.1016/j.jpowsour.2004.01.049 ↗
12. Enhanced cycleability of LiCoO2 coated with vanadium oxides10.1016/j.jpowsour.2008.11.124 ↗
13. Performance improvement of LiCoO2 by MgF2 surface modification and mechanism exploration10.1016/j.electacta.2014.04.155 ↗
14. Recent progress in surface coating of cathode materials for lithium ion secondary batteries10.1016/j.jallcom.2017.02.230 ↗
15. Pessoa · 2015
16. Mussel-inspired surface chemistry for multifunctional coatings
17. Santo · 2012
18. Comparative studies on ZnO-coated and uncoated LiCoO2 cycled at various rates and temperatures10.1016/j.cap.2010.07.031 ↗
19. Characterization of LiMn2O4-coated LiCoO2 film electrode prepared by electrostatic spray deposition10.1016/j.jpowsour.2005.12.058 ↗
20. Synthesis of LiCoO2 epitaxial thin films using a sol-gel method10.1016/j.jpowsour.2014.10.070 ↗
21. Enhanced cyclability and thermal stability of LiCoO2 coated with cobalt oxides10.1016/j.surfcoat.2004.06.007 ↗
22. Improved high-voltage performance of FePO4-coated LiCoO2 by microwave-assisted hydrothermal method10.1016/j.elecom.2014.03.017 ↗
23. Unraveling the multiple effects of Li2ZrO3 coating on the structural and electrochemical performances of LiCoO2 as high-voltage cathode materials
24. A one-pot strategy for nanocrystalline coating of micro- and nanoparticles
25. Co3O4 nanoparticles by chemical combustion: Effect of fuel to oxidizer ratio on structure, microstructure and EPR10.1016/j.ssc.2008.07.020 ↗
26. Direct synthesis of iron oxide nanopowders by the combustion approach: Reaction mechanism and properties10.1021/cm040061m ↗
27. Optimized conditions for glycine-nitrate-based solution combustion synthesis of LiNi_0.5Mn_1.5O4 as a high-voltage cathode material for lithium-ion batteries10.1016/j.electacta.2014.01.084 ↗
28. Characteristics of Y2O3 powders prepared by solution combustion synthesis in the light of a new thermodynamic approach10.1016/j.ceramint.2014.04.062 ↗
29. Synthesis and electrochemical properties of NiO nanospindles10.1016/j.materresbull.2013.11.004 ↗
30. Structure, optical, electrical and thermoelectric properties of solution-processed Li-doped NiO films grown by SILAR10.1016/j.mssp.2018.04.010 ↗
31. Substrate temperature dependent structural orientation of EBPVD deposited NiO films and its influence on optical, electrical property10.1016/j.mssp.2017.11.013 ↗
32. Solution combustion synthesis of LiCoO2 nanoparticles
33. A. Büyükburç, M. Aydinol, High rate capable manganese and tungsten doped freeze dried lithium cobalt oxide cathode material for secondary lithium-ion batteries, Tech. Rep., (September) 2016, p. 24.
34. Shao-Horn · 2003 · 478
35. Lithium cobalt oxides functionalized by conductive Al-doped ZnO coating as cathode for high-performance lithium ion batteries10.1016/j.electacta.2016.12.037 ↗
36. Synthesis and electrochemical performance of tetravalent doped LiCoO2 in lithium rechargeable cells10.1016/S0167-2738(03)00081-X ↗
37. High-performance LiCoO2 by molten salt (LiNO3:LiCl) synthesis for Li-ion batteries10.1016/j.jpowsour.2005.01.019 ↗
38. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application10.1039/C3EE42704H ↗
39. Superior electrochemical performance of LiCoO2 electrodes enabled by conductive Al2O3 -doped ZnO coating via magnetron sputtering10.1016/j.jpowsour.2015.08.031 ↗
40. Structural and electrochemical properties of LiCoO2 prepared by combustion synthesis10.1016/S0167-2738(02)00765-8 ↗
41. Factors affecting the shape of current-potential curves10.1021/ed060p285 ↗
42. Cyclic voltammetry10.1021/ed060p290 ↗
43. Spinel LiMn2O4 active material with high capacity retention10.1016/j.apsusc.2007.04.070 ↗
44. Electrochemical performance of SrF2-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries10.1016/j.jpowsour.2008.08.011 ↗
45. AC Impedance analysis of polycrystalline insertion electrodes: Application to Li_1-xCoO210.1149/1.2114158 ↗
46. Understanding the improvement in the electrochemical properties of surface modified 5 V LiMn_1.42Ni_0.42Co_0.16O4 spinel cathodes in lithium-ion cells10.1021/cm9000043 ↗
47. Structural and electrochemical properties of co-mn-mg multi-doped nickel based cathode materials LiNi_0.9Co_0.1-x[Mn_1/2Mg_1/2]xO2 for secondary lithium ion batteries10.1016/j.electacta.2012.12.071 ↗
48. High-voltage cell performance and thermal stability of nanoarchitectured polyimide gel polymer electrolyte-coated LiCoO2 cathode materials10.1016/j.electacta.2012.04.073 ↗
49. Thermal stability of the solid electrolyte interface on carbon electrodes of lithium batteries10.1149/1.1647568 ↗