journal article·2022-06

Fabrication and characterization of wollastonite-titanium porous scaffold for pharmaceutical application: Representative volume element simulation

Huixing Liang, S. Niazi Angili, M. Morovvati, Xiang Li, S. Saber-Samandari, M.Y.P.M. Yusof, A. Khandan, D. Toghraie

Publisher page

Abstract

The use of modern methods for the fabrication of porous scaffolds has led to the construction of complex composite scaffolds with a very similar bone structure. One of these useful methods is called the space holder method which uses the NaCl microparticles as space agents. In this study, the novel calcium silicate bioceramic (Wollastonite: WS) particles are used as the based ceramic with the addition of various amounts of titanium particle (TiO 2-TiNP). The combination of WS-TiNP with various amounts of Ti-NP (pure WS (S1), WS-5 wt% TiO 2 (S2), WS-10 wt% TiO 2 (S3), and WS-15 wt% TiO 2 (S4)) composed with NaCl space agent under 200 MPa using space holder technique is performed. The materials characterization is performed using Scanning Electron Microscope (SEM) and X-ray diffraction (XRD) analysis for morphological and phase analysis. After analyzing the mechanical features such as compressive strength and fracture toughness, the biological properties such as biodegradation rate and bioactivity are evaluated after 28 days of soaking in phosphate buffer saline (PBS) and simulated body fluid (SBF), respectively. As the porosity value affects the mechanical performance the Abaqus software was utilized to predict the atomic structure of the porous bio-composite WS-TiNP. The obtained results indicate that the compressive strength and porosity increased and decrease from 5.2 to 8.5 MPa and 62% to 45%, respectively. Also, the Abaqus models and experimental data have an error of 18% to evaluate the influence of the porosity on the compressive strength. The observation indicate that the sample with 10 wt% TiO 2 has a potential for pharmaceutical and maxilla facial application.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Improvement in osseointegration of tricalcium phosphate-zircon for orthopedic applications: an in vitro and in vivo evaluation10.1007/s11517-020-02157-1 ↗
2. Synergic effects of magnetic nanoparticles on hyperthermia-based therapy and controlled drug delivery for bone substitute application10.1007/s10948-020-05530-1 ↗
3. A novel porous graphene scaffold prepared using Freeze-drying technique for orthopedic approaches: Fabrication and buckling simulation using GDQ method
4. Effect of calcium silicate nanoparticle on surface feature of calcium phosphates hybrid bio-nanocomposite using for bone substitute application10.1016/j.powtec.2019.10.111 ↗
5. Incorporation of wollastonite bioactive ceramic with titanium for medical applications: An overview10.1016/j.msec.2018.12.056 ↗
6. Porous ceramic titanium dioxide scaffolds promote bone formation in rabbit peri-implant cortical defect model10.1016/j.actbio.2012.09.009 ↗
7. High-temperature Raman spectra and thermal expansion of wollastonite10.1111/j.1151-2916.1997.tb03113.x ↗
8. Surface hardness and flammability of Na2SiO3 and nano-TiO2 reinforced wood composites10.1039/C9RA05200C ↗
9. Experimental determination of the 1300° C and 1400° C isotherms for CaO–SiO2–TiO2-10 wt% Al2O3 system in air10.1016/j.ceramint.2019.12.170 ↗
10. Micro-finite element model to investigate the mechanical stimuli in scaffolds fabricated via space holder technique for cancellous bone
11. Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique: fabrication, characterization and simulation10.1016/j.jmbbm.2019.03.014 ↗
12. Bone regeneration using bio-nanocomposite tissue reinforced with bioactive nanoparticles for femoral defect applications in medicine
13. On the mechanical and biological properties of bredigite-magnetite (Ca7MgSi4O16-Fe3O4) nanocomposite scaffolds10.1016/j.ceramint.2017.11.082 ↗
14. Research directions in computational mechanics10.1016/S0045-7825(02)00616-3 ↗
15. Virtual testing of advanced composites, cellular materials and biomaterials: A review10.1016/j.compositesb.2014.01.007 ↗
16. Transversely isotropic elastic properties of single-walled carbon nanotubes10.1103/PhysRevB.69.045414 ↗
17. Multiscale modeling of the elastic moduli of CNT-reinforced polymers and fitting of efficiency parameters for the use of the extended rule-of-mixtures10.1016/j.compositesb.2018.09.057 ↗
18. Biomaterial optimization in a percutaneous aortic valve stent using finite element analysis10.1016/j.carrev.2008.12.003 ↗
19. On the estimation of mechanical properties of single-walled carbon nanotubes by using a molecular-mechanics based FE approach10.1016/j.compscitech.2008.09.010 ↗
20. Prediction of composite properties from a representative volume element10.1016/0266-3538(95)00141-7 ↗
21. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
22. 3D microstructure-based modelling of the deformation behavior of ceramic matrix composites10.1016/j.jeurceramsoc.2017.11.038 ↗
23. Modelling of multilayer actuator layers by homogenization technique using Digimat software10.1016/j.ceramint.2016.11.157 ↗
24. Bifurcation analysis of plastic wrinkling formation for anisotropic laminated sheets (AA2024–Polyamide–AA2024)10.1016/j.commatsci.2013.03.037 ↗
25. Mechanically-reinforced 3D scaffold constructed by silk nonwoven fabric and silk fibroin sponge10.1016/j.colsurfb.2020.111361 ↗
26. the effect of adding Tio2 nanoparticles on dental amalgam properties
27. Fabrication of polylactic acid (PLA)-based porous scaffold through the combination of traditional bio-fabrication and 3D printing technology for bone regeneration
28. Crack bridging modelling in Bioglass® based scaffolds reinforced by poly-vinyl alcohol/microfibrillated cellulose composite coating10.1016/j.mechmat.2017.04.004 ↗
29. Investigation on the failure mechanism of triply periodic minimal surface cellular structures fabricated by Vat photopolymerization Additive Manufacturing under compressive loadings10.1016/j.mechmat.2019.103150 ↗
30. Strengthening mechanism of PDLLA coated titania foam10.1016/j.mechmat.2013.09.007 ↗
31. Characterization of polypropylene (PP) and poly(ethylene terephthalate) (PET) multifilament braided textile structures for Achilles tendon partial substitution10.1016/j.mechmat.2020.103668 ↗
32. A numerical investigation of effective thermoelastic properties of interconnected alumina/Al composites using FFT and FE approaches10.1016/j.mechmat.2015.09.002 ↗
33. Constitutive equations for the kinetics of swelling of hydrogels10.1016/j.mechmat.2016.08.012 ↗
34. Effect of grain size on structural transitions in anatase TiO2: A Raman spectroscopy study at high pressure10.1103/PhysRevB.70.134102 ↗
35. Strain and grain size of TiO2 nanoparticles from TEM, Raman spectroscopy and XRD10.1016/j.rinp.2018.03.008 ↗
36. Embedding of ultra-dispersed MoS2 nanosheets in N,O heteroatom-modified carbon nanofibers for improved adsorption of Hg2+.10.1016/j.coco.2022.101106 ↗
37. Hierarchical dual-nanonet of polymer nanofibers and supramolecular nanofibrils for air filtration with a high filtration efficiency, low air resistance and high moisture permeation10.1039/D1TA01505B ↗
38. Unveiling substitution preference of chromium ions in sulphoaluminate cement clinker phases. Composites Part B.
39. Improving the mechanical properties of strontium nitrate doped dicalcium phosphate cement nanoparticles for bone repair application10.1016/j.ceramint.2021.02.002 ↗
40. Endodontic management of a fused mandibular third molar and distomolar: A case report10.1111/j.1747-4477.2009.00190.x ↗
41. Histologic evaluation of human pulp response to total etch and self etch adhesive systems10.5812/ircmj.3335 ↗
42. Developing a novel porous bio-photopolymer-SWCNT-ceramic fabricated by digital light processing technology for orthopedic applications
43. Chemical weathering rates of pyroxenes and amphiboles
44. Painful scoliosis secondary to posterior rib osteoid osteoma: a case report and review of literature10.5812/jost.62337 ↗
45. A porous polymeric–hydroxyapatite scaffold used for femur fractures treatment: fabrication, analysis, and simulation10.1007/s00590-019-02530-3 ↗
46. Multi-objective optimization of residual stresses and distortion in submerged arc welding process using genetic algorithm and harmony search10.1177/0954406219885977 ↗
47. Investigation on the effect of functionalization of single-walled carbon nanotubes on the mechanical properties of epoxy glass composites: Experimental and molecular dynamics simulation10.1016/j.jmrt.2021.03.104 ↗
48. Investigation of the mechanical properties of a bony scaffold for comminuted distal radial fractures: Addition of akermanite nanoparticles and using a freeze-drying technique10.1016/j.jmbbm.2021.104643 ↗
49. Molecular modeling of Ti-6Al-4V alloy shot peening: the effects of diameter and velocity of shot particles and force field on mechanical properties and residual stress10.1088/1361-651X/ac03a3 ↗
50. An experimental determination of fracture toughness of API X46 steel pipeline using single edge bend and crack assessments by failure assessment diagrams
51. Parametric study of automotive shape memory alloy bumper beam subjected to low-velocity impacts10.1080/13588265.2020.1717916 ↗
52. Finite Element modeling of Microwave-Assisted Hot Press process in a multimode furnace10.1016/j.apm.2015.03.007 ↗
53. Comparison of immediate and delayed light-curing on nano-indentation creep and contraction stress of dual-cured resin cements10.1016/j.jmbbm.2016.08.001 ↗
54. Study on the densification behavior of aluminum powders using microwave hot pressing process10.1007/s00170-018-1867-3 ↗
55. The Response of GFRP Nanocomposites Reinforced with Functionalized SWCNT Under Low Velocity Impact: Experimental and LS-DYNA Simulation Investigations
56. A fuzzy logic model and a neuro-fuzzy system development on supercritical CO2 regeneration of Ni/Al2O3 catalysts10.1016/j.jcou.2021.101706 ↗
57. A femoral shape porous scaffold bio-nanocomposite fabricated using 3D printing and freeze-drying technique for orthopedic application10.1016/j.matchemphys.2021.125302 ↗
58. Bioprinting of three-dimensional scaffold based on alginate-gelatin as soft and hard tissue regeneration10.1016/j.jmrt.2021.08.069 ↗
59. Insights into the thermochemical evolution of maleic anhydride-initiated esterified starch to construct hard carbon microspheres for Lithium-ion batteries10.1016/j.jechem.2021.08.050 ↗
60. Hard carbon anodes for next-generation li-ion batteries: review and perspective10.1002/aenm.202101650 ↗
61. Self-standing hard carbon anode derived from hyper-linked nanocellulose with high cycling stability for lithium-ion batteries10.1002/eom2.12091 ↗
62. Extraordinary strength-ductility in gradient amorphous structured Zr-based alloy10.1016/j.jallcom.2021.161507 ↗
63. Efficient Preparation and Anticorrosion Mechanism of Superhydrophobic 7075 Aviation Aluminum Alloy
64. Study on Properties of Potassium Sodium Niobate Coating Prepared by High Efficiency Supersonic Plasma Spraying10.3390/act11020028 ↗
65. Revealing the doping mechanism of barium in sulfoaluminate cement clinker phases10.1016/j.jclepro.2021.126405 ↗
66. Investigating Pose Representations and Motion Contexts Modeling for 3D Motion Prediction
67. Establishing a 3D aggregates database from X-ray CT scans of bulk concrete10.1016/j.conbuildmat.2021.125740 ↗
68. Dynamic response analysis of vehicle and asphalt pavement coupled system with the excitation of road surface unevenness10.1016/j.apm.2021.12.005 ↗
69. Torsion design of CFRP-CFST columns using a data-driven optimization approach10.1016/j.engstruct.2021.113479 ↗