Role of nickel in structural and mechanical properties of nc-WNNi sputtered nanocomposite coatings
Source abstract
Abstract
Nanocomposites coatings offers a wide range of possibilities to promote hardness, oxidation resistance, wear resistance, etc properties significant for protective coatings. Finding new nanostructured coating with high hardness and thermal stabilities are the prime requirement of modern industries. In view of above, the nc-WNNi nanocomposite coatings were deposited using reactively sputtered method on silicon (1 0 0) substrate by varying the power of Nickel (Ni). The coatings were characterized by using grazing incidence X-ray diffraction (GIXRD), Field emission scanning electron microscope (FESEM), energy dispersive x-ray analysis (EDX), thickness profiler, four probe resistivity measurement and nanoindentation tester. Through GIXRD studies the desired face centered cubic W 2N phase was confirmed, with decreasing crystallite size on increasing Ni power (content). FESEM image revels/suggest that at low Ni content, the film structure stabilized into well separated grains with the presence of grain boundary and were of uneven shape throughout. On increasing Ni power, the agglomeration increase and no clear signature of grain boundaries were visible. The resistivity of the films was found to be decreasing with increasing Ni content at different temperatures. Improved mechanical properties were observed at low Ni power (content), which drastically decreases with increasing Ni power. The highest hardness (H), elastic modulus (Er), elastic recovery (We), and resistance to plastic deformation (H 3/E 2) were obtained 26.60 GPa, 276.82 GPa, 69.80 GPa, 245 MPa respectively for nc-WN10Ni film. The nc-WN10Ni film shows the highest mechanical properties as compared to others.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A concept for the design of novel superhard coatings
2. Influence of adding transition metal elements to an aluminum target on electrical resistivity and hillock resistance in sputter-deposited aluminum alloy thin films
3. Gold nanocomposites
4. Ferromagnetic nanocomposite films of cobalt in a ceramic matrix formed by thermal decomposition of cobalt nitride, CoN, precursor
5. Structural and mechanical evolution of TiAlSiN nanocomposite coating under influence of Si3N4 power
6. A hard yet tough CrAlSiN nanocomposite coating for blades deposited by filtered cathode vacuum arc
7. S. Anwar, D. Das, S. Anwar, Development of metal (Ni)/ nitride (W 2 N) nanocomposite film for industrial application, vol. 33, no. 4, p. 1172096.
8. Improving thermal stability of TiSiN nanocomposite coatings by multilayered epitaxial growth
9. Corrosion behaviour of nanocomposite TiSiN coatings on steel substrates
10. ZrN/Cu nanocomposite film – a novel superhard material
11. Structure and microhardness of magnetron sputtered ZrCu and ZrCu-N films
12. Structure and properties of hard and superhard Zr-Cu-N nanocomposite coatings
13. Structure and mechanical properties of magnetron sputtered Zr-Ti-Cu-N films
14. The nanostructure and mechanical properties of PVD CrCu (N) coatings
15. CrN-Ag self-lubricating hard coatings
16. Structure refinement and hardness enhancement of titanium nitride films by addition of copper
17. Microstructure and mechanical properties of Cu doped TiN superhard nanocomposite coatings
18. High-quality a-Si: H grown at high rate using an expanding thermal plasma
19. Mo2N/Cu thin films - the structure, mechanical and tribological properties
20. T. Turutoǧlu, M. Ürgen, A. F. Çakir, A. Öztürk, Characterization of Mo2N/Ag nanocomposite coatings produced by magnetron sputtering, Key Eng. Mater., vol. 264–268, no. I, pp. 489–492, 2004, doi: 10.4028/www.scientific.net/kem.264-268.489.
21. Magnetron sputter deposition of WC-Ag and TiC-Ag coatings and their frictional properties in vacuum environments
22. Microstructure and vacuum tribology of TiC-Ag composite coatings deposited by magnetron sputtering-pulsed laser deposition
23. Synthesis and characterization of Ni and Ni/CrN nanocomposite coatings by plasma assisted metal-organic CVD
24. M.F.Zhu∗F.C.T.SoM.-A.Nicolet, AMORPHOUS Ni-N-W FILM AS A DIFFUSION BARRIER BETWEEN ALUMINUM AND SILICON, Thin Solid Films, vol. 130, no. 3–4, pp. 245–251, 1985, Accessed: Mar. 03, 2022. [Online]. Available: https://www.sciencedirect.com/science/article/abs/pii/0040609085903566?via%3Dihub.
25. Corrosion of sputtered W-Ni-N hard coatings in chloride media
26. Effect of Ni addition on the structure and properties of Cr-Ni-N coatings deposited by closed-field unbalanced magnetron sputtering ion plating
27. Structural evolution of Ti-Al-Si-N nanocomposite coatings
28. Thermal Oxidation of Tungsten-Based Sputtered Coatings
29. Investigation of the mechanical properties of thin films by nanoindentation, considering the effects of thickness and different coating-substrate combinations
30. Relationships between hardness, Young’s modulus and elastic recovery in hard nanocomposite coatings
31. Nitrogen effect on the electrical properties of CNx thin films deposited by reactive magnetron sputtering
32. W. C. Oliver, G. M. Pharr, and I. Introduction, “experiments,” 1992.
33. W. C. Oliver, “,” 2004.
34. Q. F. Fang
35. Magnetron sputtering of hard nanocomposite coatings and their properties