journal article·2018-02

Preparation of ZrO2-Y2O3 layers at low temperatures by MOCVD under atmospheric and reduced pressure

Agata Sawka, Andrzej Kwatera

Publisher page

Abstract

Abstract Non-porous amorphous or nanocrystalline ZrO2-Y2O3 layers were synthesized on quartz glass substrates using Zr(tmhd)4 and Y(tmhd)3 as reactants. The synthesis temperature was changed in the range of 520–820 °C. The total gas pressure in the CVD reactor amounted to approximately 760 mmHg or 50–80 mmHg. The molar ratio of Zr(tmhd)4::Y(tmhd)3 was approximately 6.2. Ar and air were used as carrier gases. Air fulfilled role of oxidizer of carbon resulting from the pyrolysis of metalo-organic reactants. The value of the gas flow was selected so that the extended criterion of Grx/Rex2 was below 0.01. The microstructures of layers deposited with and without the presence of air were examined by scanning electron microscopy. Their linear and average point chemical composition (from relatively the fracture of the sample and its surface) were determined using an EDS analyzer. The samples were also tested by X-ray analysis and UV-VIS spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Catalytic Processes in Materials Science · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Deposition of Sm2O3 -doped CeO2 layers using the MOCVD method10.1016/j.ceramint.2015.09.089 ↗
2. Ceramics materials containing rare earth oxides for solid fuel cells10.1016/S0925-8388(96)02629-1 ↗
3. Design and fabrication of a 100 W anode supported micro-tubular SOFC stack10.1016/j.jpowsour.2005.01.079 ↗
4. Process of solid state reactions between doped ceria and zirconia10.1016/S0167-2738(00)00416-1 ↗
5. Conduction model of oxide ions of grain boundary of solid electrolyte10.1016/j.ceramint.2008.03.007 ↗
6. Samarium doped cerium oxide thin films deposited by e-beam technique10.1016/j.surfcoat.2009.09.032 ↗
7. Yttria-stabilized zirconia thin films by pulsed laser deposition: Microstructural and compositional control10.1016/j.jeurceramsoc.2009.06.012 ↗
8. High-speed deposition of zirconia films by laser–induced plasma CVD10.1016/j.ssi.2004.02.034 ↗
9. A.K. Rivai, Mardiyanto, Agusutrisno, E. Suharyadi, Yttria-stabilized zirconia ceramic deposition on SS430 ferritic steel grown by PLD – Pulsed Laser Deposition method, J. Phys. Conf. Ser. 799 (2017) 012016.
10. Sculptured thin films and glancing angle deposition: growth mechanics and application10.1116/1.580562 ↗
11. Fabrication and characterization of a YSZ/SDC composite electrolyte by a sol-gel coatings method10.1016/S0378-7753(02)00270-7 ↗
12. Atomic layer deposition of yttria-stabilized zirconia for solid oxide fuel cells10.1021/cm070913t ↗
13. Atomic layer deposition of yttria-stabilized zirconia thin films for enhanced reactivity and stability of solid oxide fuel cells10.1016/j.energy.2016.09.094 ↗
14. Characterization of atomic layer deposition and sputtered yttria-stabilized-zirconia thin films for low-temperature solid oxide fuel cells10.1007/s12541-015-0287-7 ↗
15. Atomic layer deposition chemistry: recent developments and future challenges10.1002/anie.200301652 ↗
16. Preparation and characterization of CeO2 films for gate dielectrics applications: comparative study of chemical vapor deposition and atomic layer deposition processes10.7567/JJAP.50.10PA06 ↗
17. Uniform thin chemically vapour deposited layers of high density on the inner surfaces of tube-shaped substrates10.1016/0040-6090(91)90072-6 ↗
18. The preparation, characterization and applications of silicon nitride thin films10.1016/0040-6090(80)90254-0 ↗
19. A. Kwatera, Modelling of chemical vapour deposition (CVD) in the regime controlled by the diffusion of reactants to the substrate, Scientific Bulletins of Stanislaw Staszic Academy of Mining and Metallurgy. Ceramics. Bulletin 62, Krakow 1991 (habilitation thesis, in Polish).
20. MOCVD of thick YSZ coatings using acetyloacetonates10.1016/j.surfcoat.2004.03.019 ↗
21. High-speed deposition of yttria stabilized zirconia by MOCVD10.1016/j.surfcoat.2004.02.016 ↗
22. MOCVD deposition of YSZ on stainless steel10.1016/S0169-4332(02)01088-7 ↗
23. MOCVD of YSZ coatings using β-diketonate precursors10.1016/j.jallcom.2008.02.103 ↗
24. Metal-organic vapor deposition of YSZ electrolyte layers for solid oxide fuel cells applications10.1016/S0040-6090(97)00017-5 ↗
25. Models of the processes at the substrate surface in the CVD method10.1016/0272-8842(91)90004-J ↗
26. Carbon doped α-Al2O3 films synthesized on cemented carbide tools by the metal-organic LPCVD technique10.1016/0040-6090(91)90027-U ↗
27. Thin CVD layers of carbon doped silicon nitride on quartz glass10.1016/0272-8842(89)90016-3 ↗
28. Model research on synthesis of Al2O3-C layers by MOCVD10.1515/amm-2015-0270 ↗
29. Preparation of amorphous composite of silicon nitride-carbon layers on quartz glass by CVD method10.1016/S0022-3093(99)00886-8 ↗