journal article·2017-10

Using natural cotton fibers to synthesize carbon nanotubes and electromagnetic wave absorption properties

Guang-Lin Zhao, Feng Gao, Kuo Li, Zhou Wang, Maryam Jahan

Publisher page

Abstract

Abstract In this paper, we report a new method for synthesizing carbon nanotubes (CNTs) and other carbon nanostructures such as carbon nanoparticles (CNPs) through catalytic thermolysis of natural cotton fibers. Using the new method, long CNTs (L-CNTs), which could reach to 20 μm or longer, can be readily synthesized from natural cotton fibers under hydrogen environment at a thermolysis temperature around 1200 °C. The analysis of the microstructure of synthesized L-CNTs showed that the CNT growth from the catalytic thermolysis of cotton fibers may not undergo a carbon-containing gas generation step that is different from most of other growth methods. We further studied the dielectric and electromagnetic wave (EMW) absorption properties of synthesized CNTs by embedding them in a epoxy matrix. The measurement results show that complex dielectric permittivity ɛ and EMW absorption ratio of the composites strongly depend on CNT loading in the frequency range from 8 to 26 GHz.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Carbon Nanotubes in Composites · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Advances in the science and technology of carbon nanotubes and their composites: a review10.1016/S0266-3538(01)00094-X ↗
2. Electrochemistry and electroanalytical applications of carbon nanotubes: a review10.2116/analsci.21.1383 ↗
3. Ballistic transport in graphene nanostrips in the presence of disorder: importance of edge effects10.1021/nl062132h ↗
4. Graphene-based supercapacitor with an ultrahigh energy density10.1021/nl102661q ↗
5. Physical properties of multiwalled carbon nanotubes10.1016/S1463-0176(99)00012-5 ↗
6. Reliability and current carrying capacity of carbon nanotubes10.1063/1.1396632 ↗
7. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
8. Carbon nanotubes: synthesis, integration, and properties10.1021/ar0101640 ↗
9. Laser ablation process for single-walled carbon nanotube production10.1166/jnn.2004.072 ↗
10. Carbon nanotube synthesis via the catalytic CVD method: a review on the effect of reaction parameters10.1080/15363830500538441 ↗
11. Synthesis of carbon nanotubes by arc-discharge method
12. Fluidized bed catalytic chemical vapor deposition synthesis of carbon nanotubes—a review10.1016/j.cej.2009.07.052 ↗
13. Chemical vapor deposition of carbon nanotubes: a review on growth mechanism and mass production10.1166/jnn.2010.2939 ↗
14. Recent progress on the growth mechanism of carbon nanotubes: a review10.1002/cssc.201100175 ↗
15. Methods for carbon nanotubes synthesis—review10.1039/c1jm12254a ↗
16. Carbon nanotube synthesis: from large-scale production to atom-by-atom growth10.1088/0957-4484/23/14/142001 ↗
17. Catalytic growth of carbon microtubules with fullerene structure10.1063/1.109315 ↗
18. Condensed-phase nanotubes10.1038/377687a0 ↗
19. Synthesis of SWNTs and MWNTs by a molten salt (NaCl) method10.1016/S0009-2614(02)01447-1 ↗
20. Synthesis of carbon nanotubes by electrochemical deposition at room temperature10.1016/j.carbon.2005.11.006 ↗
21. Preparation of short carbon nanotubes by mechanical ball milling and their hydrogen adsorption behavior10.1016/S0008-6223(03)00302-6 ↗
22. Production of short carbon nanotubes with open tips by ball milling10.1016/S0009-2614(01)00004-5 ↗
23. Microwave absorption of single-walled carbon nanotubes/soluble cross-linked polyurethane composites10.1021/jp0731396 ↗
24. X-Band microwave characterization of carbon-based nanocomposite material, absorption capability comparison and RAS design simulation10.1016/j.compscitech.2009.11.015 ↗
25. Electromagnetic wave absorption of multi-walled carbon nanotubes (outer diameter 8–15nm)-epoxy composites in R band10.1039/C4TC01540A ↗
26. Influence of uniaxial tension on the microwave absorption properties of filled polymers10.1063/1.2988900 ↗
27. A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles10.1063/1.3688435 ↗
28. The influence of single-walled carbon nanotube structure on the electromagnetic interference shielding efficiency of its epoxy composites10.1016/j.carbon.2007.04.016 ↗
29. A review and analysis of electrical percolation in carbon nanotube polymer composites10.1016/j.compscitech.2008.06.018 ↗
30. Microwave absorption enhancement and complex permittivity and permeability of Fe encapsulated within carbon nanotubes10.1002/adma.200306460 ↗
31. Electromagnetic and microwave absorbing properties of multi-walled carbon nanotubes/polymer composites10.1016/j.mseb.2006.02.045 ↗
32. Electrical conductivity and electromagnetic interference shielding of multiwalled carbon nanotube composites containing Fe catalyst10.1063/1.1641167 ↗
33. Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites10.1021/nl0602589 ↗
34. High permittivity from defective multiwalled carbon nanotubes in the X-band10.1002/adma.200304485 ↗
35. The effect of type and ratio of reinforcement on the synthesis and characterization Cu-based nanocomposites by flake powder metallurgy10.1016/j.jallcom.2015.07.008 ↗
36. Effect of the CNT Content on microstructure, physical and mechanical properties of Cu-based electrical contact materials produced by flake powder metallurgy10.1007/s13369-015-1734-6 ↗
37. Microstructure, electrical conductivity and hardness of multilayer graphene/copper nanocomposites synthesized by flake powder metallurgy10.1007/s12540-015-5058-6 ↗
38. The effect of flake microstructure on the preparation and properties of Cu-graphite sintered nanocomposites10.1007/s11106-016-9823-y ↗
39. Diameter-controlled synthesis of carbon nanotubes10.1021/jp0142278 ↗
40. Tailoring the diameter, density and number of walls of carbon nanotubes through predefined catalyst particles10.1002/pssa.200778142 ↗
41. Diameter controlled growth of single-walled carbon nanotubes from SiO2 nanoparticles10.1016/j.carbon.2011.04.016 ↗
42. X-Ray diffraction in random layer lattices10.1103/PhysRev.59.693 ↗
43. Crystal growth and morphology: New developments in an integrated hartman-perdok connected net roughening transition theory, supported by computer simulations10.1021/cg034182v ↗
44. Dielectric spectroscopy of ferromagnetic semiconductors10.1103/RevModPhys.29.279 ↗
45. On the dispersion of resistivity and dielectric constant of some semiconductors at audiofrequencies10.1103/PhysRev.83.121 ↗
46. Microwave-absorbing performance and mechanical properties of poly(vinyl chloride)/acrylonitrile-butadiene rubber thermoplastic elastomers filled with multiwalled carbon nanotubes and silicon carbide10.1002/app.39063 ↗
47. Enhanced microwave absorption in nickel-filled multiwall carbon nanotubes in the s band10.1149/1.3065992 ↗
48. Electric modulus and interfacial polarization in composite polymeric systems10.1023/A:1004398514901 ↗
49. High microwave permittivity of multiwalled carbon nanotube composites10.1063/1.1762693 ↗
50. Dielectric spectroscopy on melt processed polycarbonate multiwalled carbon nanotube composites10.1016/S0032-3861(03)00451-8 ↗
51. King · 1955
52. Polyaniline–MWCNT nanocomposites for microwave absorption and EMI shielding10.1016/j.matchemphys.2008.08.065 ↗
53. Microwave absorption properties of multi-walled carbon nanotube (outer diameter 20–30nm)–epoxy composites from 1 to 26.5GHz10.1016/j.diamond.2014.12.008 ↗
54. Enhanced electromagnetic wave shielding effectiveness of Fe doped carbon nanotubes/epoxy composites10.1063/1.4828356 ↗
55. X-Bandmicrowave characterization of carbon-based nanocomposite material, absorption capability comparison and RAS design simulation10.1016/j.compscitech.2009.11.015 ↗