Interface engineering of underlayer of chemically-amplified EUV photoresists to enhance the photolithographic performance
Source abstract
Abstract
The high numerical aperture (NA) extreme ultra-violet (EUV) requires a thin layer of photoresist stack, facing great challenges of pattern collapse during photolithography. Underlayers (ULs) emerge as a promising strategy to conquer the challenge via effectively tuning the interfacial adhesion. Two ULs of hexamethyldisilane (HMDS) and a new commercial adhesion promoter (AR_300-80_new) were explored to improve the lithographic performance of a lab-developed EUV chemically amplified photoresist (CAR). The potential impact of wetting properties, surface free energy, and adhesion properties of the ULs on the pattern collapse, stochastic failures and line edge roughness (LER) were systematically examined. HMDS (water contact angle (WCA) = 76.6°, Wsl = 71.8 mJ/m 2) is superior to AR_300-80_new (WCA = 44.8°, Wsl = 86.8 mJ/m 2) in enhancing the pattern performance. High polarity (18.62 mJ/m 2) and low dispersive surface energy (24.75 mJ/m 2) components in ULs lead to smaller LER (8.5 nm). The results showed that the polar component of the surface energy plays a determining role in regulating the adhesion of the photoresist to the substrate and its lithographic performance. In addition, a delicate balance between wetting properties, matched surface energy and adhesion properties is required to achieve optimal lithographic performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Photolithography Techniques · Electron and X-Ray Spectroscopy Techniques · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. K.A. Goldberg et al., EUV photolithography: resist progress and challenges, in Extreme Ultraviolet (EUV) Lithography IX, 2018.
2. E. Buitrago et al., Chapter 4 - EUV lithography process challenges, in Frontiers of Nanoscience, A. Robinson, R. Lawson (Eds)., Elsevier. p. 135-176, 2016.10.1016/B978-0-08-100354-1.00004-1 ↗
3. The role of underlayers in EUVL10.2494/photopolymer.31.209 ↗
4. X. Hou, et al., Chemical trimming overcoat: an advanced spin-on process for photoresist enhancement in EUV lithography. in Advances in Patterning Materials and Processes XL, SPIE, 2023.10.1117/12.2658882 ↗
5. Polypeptoids: exploring the power of sequence control in a photoresist for extreme-ultraviolet lithography10.1002/admt.202301104 ↗
6. Extreme ultraviolet lithographic performance and reaction mechanism of polymeric resist─utilizing radical- and acid-amplified cross-linking10.1021/acs.chemmater.3c02628 ↗
7. Trends in photoresist materials for extreme ultraviolet lithography: a review
8. J.K. Park, et al., Understanding etch properties of advanced chemically amplified EUV resist, in: Advanced Etch Technology and Process Integration for Nanopatterning XII, SPIE, 2023.10.1117/12.2659178 ↗
9. Recent developments in photoresists for extreme-ultraviolet lithography10.1016/j.polymer.2023.126020 ↗
10. L. Meli, et al. Driving down defect density in composite EUV patterning film stacks. in Extreme Ultraviolet (EUV) Lithography VIII, SPIE, 2017.10.1117/12.2260146 ↗
11. Bottom profile degradation mechanism in high aspect ratio feature etching based on pattern transfer observation
12. C. Ober, et al., EUV photolithography: resist progress and challenges, SPIE Advanced Lithography, Vol. 10583, SPIE, 2018.
13. M. Harumoto, et al., Defect improvement for an EUV process, in: Extreme Ultraviolet (EUV) Lithography XI, 2020.10.1117/12.2552918 ↗
14. M. Hasan, et al., Influence of photoresist thinning and underlayer film on e-beam using eP5 for high-NA patterning, in: International Conference on Extreme Ultraviolet Lithography 2022. SPIE, 2022.10.1117/12.2641768 ↗
15. R. Fallica, et al., Scaling and readiness of underlayers for high-NA EUV lithography, in: International Conference on Extreme Ultraviolet Lithography 2022, SPIE, 2022.10.1117/12.2645864 ↗
16. S. Li, et al., Novel assist layers to enhance EUV lithography performance of photoresists on different substrates, in: Advances in Patterning Materials and Processes XL, SPIE, 2023.10.1117/12.2658529 ↗
17. P. Vanelderen, et al., Underlayer optimization method for EUV lithography, in: Advances in Patterning Materials and Processes XXXVII, 2020.10.1117/12.2551684 ↗
18. Pattern collapse mitigation strategies for EUV lithography
19. S. Okada, et al., Enabling EUV pattern transfer by optimized under layer, in: Advances in Patterning Materials and Processes XXXVIII, 2021.10.1117/12.2583771 ↗
20. Prevention of photoresist pattern collapse by using liquid carbon dioxide10.1021/ie010424h ↗
21. Pattern collapse for nanoline formation
22. K. Hasegawa, et al., Adhesion improvement of photoresist: destruction mode analysis, in: Advances in Patterning Materials and Processes XXXVII, 2020.10.1117/12.2552019 ↗
23. Ultrathin extreme ultraviolet patterning stack using polymer brush as an adhesion promotion layer
24. J. Guo, et al., Polymer brush as adhesion promoter for EUV patterning, in: Advances in Patterning Materials and Processes XXXV, SPIE, 2018.10.1117/12.2297113 ↗
25. R.G. Tarascon-Auriol, et al., Surface tension and adhesion of photo- and electron-beam resists, in: Advances in Resist Technology and Processing XIV, 1997.
26. Patterning material challenges for improving EUV stochastics10.2494/photopolymer.32.169 ↗
27. Relationships between surface chemistry, nanotopography, wettability and ice adhesion in epoxy and SU-8 modified with fluoroalkylsilanes from the vapor phase10.1016/j.apsusc.2019.02.082 ↗
28. Combined molecular dynamics simulations and reaction kinetics study on wettability of trimethylsilyl functionalized silicon surfaces
29. C.K. Hohle, et al., Fundamentals of EUV resist-inorganic hardmask interactions, in: Advances in Patterning Materials and Processes XXXIV. 2017.
30. Hydrophobic modification of silica surfaces via grafting alkoxy groups10.1021/acsaelm.1c00017 ↗
31. Surface chemical reactions on self-assembled silane based monolayers10.1039/D0CS01220C ↗
32. Biosynthesis of Zinc oxide nanorods using Agaricus bisporus and its antibacterial capability enhancement with dodeciltriethoxyl on cotton textiles10.1016/j.mseb.2023.116910 ↗
33. B.M. La Fontaine, et al., Availability of underlayer application to EUV process, in Extreme Ultraviolet (EUV) Lithography II, 2011.
34. Effect of size and interparticle distance of nanoparticles on the formation of bubbles induced by nanosecond laser
35. Influence of chemical vapor precursor flow rate on the structure and thermal stability of phase-modulated VSiCN/Ag coatings10.1116/6.0001302 ↗
36. R. Barbosa, P.T. Nguyen, R.G. Thompson, Establishing a Link Between Carbon Concentration and Contact Angle on HMDS Surfaces, in: 2023 34th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC). 2023. IEEE.10.1109/ASMC57536.2023.10121088 ↗
37. Effect of the wettability of Ag2MoO4/BiVO4 010 composite on the photocatalytic degradation for 17α-ethinyl estradiol10.1016/j.jallcom.2021.163295 ↗
38. The application of superhydrophobic coatings to brass alloy substrates: A review10.1016/j.jallcom.2023.170634 ↗
39. I. Tengganu, et al., A simple surface modification to generate atomically-flat and hydrophobic substrates for gliding assays with protein motors, 2021.10.26434/chemrxiv-2021-d62p2-v3 ↗
40. Organosilicon films deposited in low-pressure plasma from hexamethyldisiloxane—A review10.1016/j.vacuum.2021.110556 ↗
41. I. Mochi, et al., Open-source software for SEM metrology, in: Photomask Technology 2020. SPIE, 2020.10.1117/12.2573154 ↗
42. I. Mochi, et al., Contacts and lines SEM image metrology with SMILE, in: Photomask Technology 2021, SPIE, 2021.10.1117/12.2600911 ↗
43. Dispersion-polar surface tension properties of organic solids10.1080/0021846708544582 ↗
44. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
45. Surface energy and wettability of van der Waals structures10.1039/C5NR06705G ↗
46. Attractive forces at interfaces10.1021/ie50660a008 ↗
47. Determination of interfacial tensions, contact angles, and dispersion forces in surfaces by assuming additivity of intermolecular interactions in surfaces10.1021/j100808a524 ↗
48. Phase-change-driven tuning of linear and nonlinear optical properties of Te/As2Se3 bilayer thin films for optoelectronic applications10.1016/j.mseb.2023.116750 ↗
49. Comment on “solid–liquid work of adhesion”10.1021/acs.langmuir.7b02476 ↗
50. K.L. Johnson, K. Kendall, A. Roberts, Surface energy and the contact of elastic solids, Proc. Royal Soc. Lond. A. Mathematical Phys. Sci., 324(1558): p. 301-313, 1971.10.1098/rspa.1971.0141 ↗
51. Adhesion and collapse of extreme ultraviolet photoresists and the role of underlayers