Power generation using hydrothermally synthesized mesoporous Mg substituted NiO based on-photo catalytic hydroelectric cell
Source abstract
Abstract
Water-based energy production devices are fast attracting substantial scientific interest due to the ongoing search for future alternate energy supplies. Using a versatile Hydroelectric strategy, here we have demonstrated the fabrication of NiO and Mg-NiO nanoparticle-based hydroelectric cell (HECs) which works on splitting water into H + and OH −. After the substitution of Mg in NiO BET depicts three times increase in the specific surface area (118 m 2/g) of the material which provides more cross section for water splitting to occur. XPS and EPR demonstrate that after Mg substitution oxygen defects in NiO are increased which boosts the physidissociation process of water-splitting. Change in morphology from nanoplate to nanoring has been observed by the FESEM study. A decrease in the band gap from 3.3 eV to 2.2 eV has been observed by Mg substitution in NiO. The Nyquist plot demonstrates the decrease in the internal resistance from 55 Ω of the NiO to 25 Ω by Mg substitution. The Mg-NiO-based HECs deliver a high-power density of about 2.12 times (i.e., 36.5 W/m 2) than pure NiO-based HECs. After Mg substitution open circuit voltage generated by HEC increased from 0.7 V to 1.1 V. This study thoroughly reveals the mechanism of magnesium substitution in NiO and proposes a feasible novel technique for meeting current energy demands.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Advanced battery technologies research · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Heteroatom-doped graphene-based materials for sustainable energy applications: A review10.1016/j.rser.2021.110849 ↗
2. Solid oxide fuel cell: Decade of progress, future perspectives and challenges10.1016/j.ijhydene.2021.06.020 ↗
3. Artificial intelligence based anomaly detection of energy consumption in buildings: A review, current trends and new perspectives10.1016/j.apenergy.2021.116601 ↗
4. Multiscale design of 3D metal–organic frameworks (M− BTC, M: Cu Co, Ni) via PLAL enabling bifunctional electrocatalysts for robust overall water splitting
5. Fundamental aspects and recent advances in transition metal nitrides as electrocatalysts for hydrogen evolution reaction: A review10.1016/j.cossms.2020.100805 ↗
6. Reconciling of experimental and theoretical insights on the electroactive behavior of C/Ni nanoparticles with AuPt alloys for hydrogen evolution efficiency and Non-enzymatic sensor10.1016/j.cej.2022.134790 ↗
7. Iijima · Helical Microtubules of Graphitic Carbon. Nature · 1991 · 354 · 56
8. Architecting the AuPt alloys for hydrazine oxidation as an anolyte in fuel cell: Comparative analysis of hydrazine splitting and water splitting for energy-saving H2 generation10.1016/j.apcatb.2022.121603 ↗
9. Guo · 2022
10. Critical review of multigeneration system powered by geothermal energy resource from the energy, exergy, and economic point of views10.1002/ese3.1296 ↗
11. Pd-Doped Co3O4 Nanoarray for Efficient Eight-Electron Nitrate Electrocatalytic Reduction to Ammonia Synthesis10.1002/smll.202303424 ↗
12. Plasma-etched Ti2O3 with oxygen vacancies for enhanced NH3 electrosynthesis and Zn–N2 batteries10.1039/D2QI01173E ↗
13. Fabrication of a SnO2-based hydroelectric cell for green energy production10.1021/acsomega.9b03309 ↗
14. Jumping-droplet electrostatic energy harvesting10.1063/1.4886798 ↗
15. Battery in the form of a cement-matrix composite10.1016/j.cemconcomp.2010.08.009 ↗
16. In situ grown Fe3O4 particle on stainless steel: A highly efficient electrocatalyst for nitrate reduction to ammonia
17. Metal oxide nanoparticles and their applications in nanotechnology10.1007/s42452-019-0592-3 ↗
18. Ambient ammonia synthesis via electrochemical reduction of nitrate enabled by NiCo2O4 nanowire array10.1002/smll.202106961 ↗
19. Nickel substituted oxygen deficient nanoporous lithium ferrite based green energy device hydroelectric cell10.1016/j.jallcom.2020.154334 ↗
20. Structural properties and optical characterization of flower-like Mg doped NiO10.1063/1.4927508 ↗
21. RuO 2 nanoparticle-decorated TiO 2 nanobelt array as a highly efficient electrocatalyst for the hydrogen evolution reaction at all pH values10.1039/D2QI02205B ↗
22. A comparative study on the electrochemical properties of nanoporous nickel oxide nanowires and nanosheets prepared by a hydrothermal method10.1039/C8RA02862A ↗
23. Facile hydrothermal synthesis of mesoporous nickel oxide/reduced graphene oxide composites for high performance electrochemical supercapacitor10.1016/j.electacta.2014.12.107 ↗
24. Lee, J.W., Park, W.B., Lee, J.H., Singh, S.P. and Sohn, K.S., 2020. A deep-learning technique for phase identification in multiphase inorganic compounds using synthetic XRD powder patterns.Nature communications,11(1), p.86.10.1038/s41467-019-13749-3 ↗
25. A novel device to generate green electric energy by water splitting at room temperature: Enhancing the efficacy by tuning nickel oxide thru lithium substitution
26. The effect of Cu-doping on CdS thin films deposited by the spray pyrolysis technique10.1016/j.jmrt.2018.10.017 ↗
27. Padole, P.R., Wankhade, H.G. and Chaudhari, G.N., 2020. Nickel oxide Nano-composite–Synthesis, Structural and Antimicrobial Study.
28. A recyclable cobalt (iii)–ammonia complex catalyst for catalytic epoxidation of olefins with air as the oxidant10.1039/D0NJ05466F ↗
29. Facile synthesis of nickel oxide nanoparticles for the degradation of Methylene blue and Rhodamine B dye: a comparative study.
30. Bio-based synthesized NiO nanoparticles and evaluation of their cellular toxicity and wastewater treatment effects10.1016/j.molstruc.2019.04.075 ↗
31. Multifunctional properties of microwave assisted CdO–NiO–ZnO mixed metal oxide nanocomposite: enhanced photocatalytic and antibacterial activities10.1007/s10854-017-8513-y ↗
32. Green synthesized phytochemically (Zingiber officinale and Allium sativum) reduced nickel oxide nanoparticles confirmed bactericidal and catalytic potential10.1186/s11671-020-3283-5 ↗
33. Correlation between crystallite size–optical gap energy and precursor molarities of ZnO thin films10.1088/1674-4926/35/4/042001 ↗
34. Optimized oxygen deficient mesoporous barium doped cobalt oxide: A wonder material for green energy generation and storage10.1016/j.jclepro.2023.138124 ↗
35. Accurate characterization of full pore size distribution of tight sandstones by low-temperature nitrogen gas adsorption and high-pressure mercury intrusion combination method10.1002/ese3.817 ↗
36. Electrical energy of the order of 24 W/m2 from water splitting using nickel oxide: Effect of synthesis process on power output10.1016/j.rechem.2023.100911 ↗
37. Investigation of electrodeposited NiO films as electrochromic material for counter electrodes in “Smart Windows”10.1016/j.matlet.2013.11.118 ↗
38. Persistent X-ray-activated phosphors: mechanisms and applications10.1038/s41377-022-00808-6 ↗
39. Rahal, H.T., Awad, R., Abdel-Gaber, A.M. and Bakeer, D., 2017. Synthesis, characterization, and magnetic properties of pure and EDTA-capped NiO nanosized particles. Journal of Nanomaterials, 2017.10.1155/2017/7460323 ↗
40. Nonradical activation of peroxydisulfate promoted by oxygen vacancy-laden NiO for catalytic phenol oxidative polymerization10.1016/j.apcatb.2019.04.094 ↗
41. Optimizing the Oxygen Vacancies Concentration of Thin NiO Nanosheets for Efficient Selective CO2 Photoreduction10.1002/solr.202100703 ↗
42. Spectroscopic properties of doped and defective semiconductingoxides from hybrid density functional calculations10.1021/ar4002944 ↗
43. Green hydroelectrical energy source based on water dissociation by nanoporous ferrite10.1002/er.3545 ↗
44. Effect of Li+, Mg2+, and Al3+ substitution on the performance of nickel ferrite-based hydroelectric cells10.1021/acs.energyfuels.2c01244 ↗