journal article·2023-09

Polarization and relaxation mechanisms in glass fiber-reinforced LED-cured polyester composites incorporating graphene nanotubes

Azime Subaşı, Mehmet Emiroğlu, Ahmet Demir

Publisher page

Abstract

The current research aimed to understand how the polarization and relaxation mechanisms in light-emitting diode (LED) cured glass fiber reinforced polyester (GFRP) composites change with graphene nanotubes (GNTs). In this context, the complex permittivity (?*), loss tangent (tan & delta;), AC electrical conductivity (& sigma;), and complex modulus (M*) features of the samples were measured via impedance spectroscopy. According to the virtual electrical modulus values, electrical polarization occurred after the first peak at 127 kHz. With increasing GNT ratio, a polarization mechanism was obtained at approximately 350 kHz as a result of a shift towards higher frequencies. Although a significant change was observed in the electrical conductivity value as the frequency increased depending on the GNT ratio, there was no change in the conductivity values up to 10 kHz. At high frequencies, dipole formation and orientation occurred, resulting in an increase in conductivity up to 150 kHz.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. The effect of cryogenically ground rubber on some mechanical properties of an unsaturated polyester resin10.1002/pen.760282204 ↗
2. Effect of recycled ceramic waste particles on kinetic of curing and thermal degradation of unsaturated polyester resin
3. Experimental evaluation of the curing of unsaturated polyester resin at various amounts of methyl ethyl ketone peroxide, cobalt octoate and porcelain powder10.37358/RC.20.10.8350 ↗
4. Study on acoustic properties of polyester – Fly ash Cenosphere\Nanographene composites
5. Cure-kinetic parameters of nanoclay-containing unsaturated polyester resins: Effect of chemical structure of resin
6. Specific Heat and Thermal Expansion of Polyester Composites Containing Singlewall-, Multiwall- and Functionalized Carbon Nanotubes
7. The photoinitiators used in resin based dental composite—a review and future perspectives10.3390/polym13030470 ↗
8. TangL, Qu J, Synthesis and photopolymerization of novel UV-curable macro-photoinitiators10.1016/j.porgcoat.2020.105546 ↗
9. Improvements in the physical properties of UV-curable coating by utilizing type II photoinitiator10.1016/j.porgcoat.2020.106038 ↗
10. Effect of Light Curing Modes and Light Curing Time on the Microhardness10.5005/jcdp-8-6-1 ↗
11. Harnessing light to create functional, three-dimensional polymeric materials: Multitasking initiation systems as the critical key to success
12. The Printing Parameters Effects on the Dimensional Accuracy of the Parts Made of Photosensitive Resin10.1002/masy.202000287 ↗
13. Mechanical properties and styrene emission levels of a UV-cured glass-fibre / vinylester composite10.1016/j.compstruct.2008.03.012 ↗
14. Influence of the fibre content, exposure time, and compaction pressure on the mechanical properties of ultraviolet-cured composites10.3390/jcs4010030 ↗
15. Recent advances on the application of UV-LED technology for microbial inactivation: Progress and mechanism10.1111/1541-4337.12645 ↗
16. Electric energy saving in photocatalytic removal of crystal violet dye through the simultaneous use of long-persistent blue phosphors, nitrogen-doped TiO2 and UV-light emitting diodes10.1016/j.jclepro.2018.11.017 ↗
17. Light-emitting diode curing light irradiance and polymerization of resin-based composite10.14219/jada.archive.2006.0147 ↗
18. Photoinitiated Polymerization : Advances, Challenges, and Opportunities10.1021/ma1007545 ↗
19. Photopolymerizable Resins for 3D-Printing Solid-Cured Tissue Engineered Implants10.2174/1389450120666190114122815 ↗
20. Radical photoinitiation with LEDs and applications in the 3D printing of composites10.1039/D0CS01411G ↗
21. Evaluation of mechanical properties of e-glass and aloe vera fi ber reinforced with polyester and epoxy resin matrices
22. Mechanical and Dielectric Properties of E-Glass Fiber / MWNTs Dispersed Epoxy Composites
23. Comparative study of the dielectric properties of natural-fiber-matrix composites and E-glass-matrix composites10.1002/app.38499 ↗
24. Electrical conductivity and electromagnetic shielding performance of glass fiber-reinforced epoxy composites with multiwalled carbon nanotube buckypaper interlayer10.1007/s10854-020-04964-6 ↗
25. Multi-walled carbon nanotube-filled polyvinyl chloride composites: Influence of processing method on dispersion quality, electrical conductivity and mechanical properties10.1016/j.compositesa.2015.12.005 ↗
26. Dielectric behavior of thin films of unsaturated polyester-resin/carbon nanotube semiconductor composites10.1002/pat.4938 ↗
27. Electric Modulus Spectroscopic Studies of the Dielectric Properties of Carbon Nanotubes/Epoxy Polymer Composite Materials10.1080/00222348.2018.1439243 ↗
28. Dielectric monitoring of carbon nanotube network formation in curing thermosetting nanocomposites10.1088/0022-3727/42/15/155402 ↗
29. A decade of graphene research : production, applications and outlook
30. A Carbonyl Compound-Based Flexible Cathode with Superior Rate Performance and Cyclic Stability for Flexible Lithium-Ion Batteries10.1002/adma.201703868 ↗
31. High-performance single-wall carbon nanotube transparent conductive films10.1016/j.jmst.2019.07.011 ↗
32. CNT / Epoxy-Masterbatch Based Nanocomposites : Thermal and Electrical Properties
33. Stable Dispersions of Single-Wall Carbon Nanotubes Using Self- Assembled Amphiphilic Copolymer Surfactants for Fabricating Wafer-Scale Devices10.1021/acsanm.0c01616 ↗
34. Electrically conductive polycarbonate/ethylene-propylene copolymer/multi-walled carbon nanotubes nanocomposites with improved mechanical properties10.1002/app.44661 ↗
35. Bazı Polimerlerin Dielektrik Özelliklerinin frekansla değişimlerinin incelenmesi
36. Polyester / Graphite Percolating Composite : Structural and Dielectric Analyses10.1007/s11664-021-09235-6 ↗
37. Two Types of Dielectric Polarization10.1149/1.3498002 ↗
38. Results in Physics Synthesis of the SWCNTs / TiO 2 nanostructure and its effect study on the thermal, optical, and conductivity properties of the CMC / PEO blend10.1016/j.rinp.2021.104675 ↗
39. Dielectric relaxation, electric conductivity, and electro-optic properties of SWCNT-doped liquid crystal 5CB10.1080/1536383X.2020.1788543 ↗
40. Electrical conductivity studies in hydrogels10.1016/S0167-2738(97)00074-X ↗
41. Dielectric properties of Cd 0. 6 Zn 0. 4 Te thin films10.1002/pssa.200306628 ↗
42. Influence of PVA and silica on chemical, thermo-mechanical and electrical properties of Celluclast-treated nanofibrillated cellulose composites10.1016/j.ijbiomac.2017.06.018 ↗
43. Effects of noncovalently functionalized multiwalled carbon nanotube with hyperbranched polyesters on mechanical properties of epoxy10.1016/j.polymertesting.2017.09.031 ↗
44. M. Le, S. Huang, Fabrication and characterization of SWCNT- reinforced polyester nanocomposites using tensile test and nanoindentation techniques, vol. 6, no. 8, pp. 711–716, 2015, doi: 10.5185/amlett.2015.5821.10.5185/amlett.2015.5821 ↗