journal article·2023-07

Self-fuelled nickel oxide encapsulated sodium alginate-grafted-polypyrrole for potentiometric sensing of lead ions

Sandeep Verma, Ashok K. Sharma, Saroj Kr Shukla

Publisher page

Abstract

Precise determination of lead ions in edible and non-edible items is essential due to high toxicity and existing technical challenges viz; requirement of external energy source, portability, sensing range, and other parameters despite tremendous technological and materials advancement. The present study demonstrates the portable potentiometric sensing of lead ions over the in-situ prepared and chemically functionalized self-fuelled ternary biopolymer nanocomposite of nickel oxide, sodium alginate, and polypyrrole (NiO/SA-g-PPY). The prepared bio-nanocomposite`s chemical structure, physical, and morphological properties were studied by FT-IR, XRD, SEM, and other relevant standard techniques. The analytical results revealed the formation of a porous hybrid composite matrix with improved electrical conductivity in the range of 1.13 × 10 −3 S cm −1 , along with chemical interactive nature and self-fuelled behavior. Further, a film of the prepared composite was cast on ITO-coated glass by spin coating methods and has been demonstrated as a sensing electrode for effective potentiometric sensing of Pb 2+ ions in natural and artificial samples after using laboratory fabricated potentiometric setup. The proposed electrode exhibits the potential response for Pb 2+ ion on the broader concentration range of 10 −8 M to 10 −3 M at pH 7.0 and temperature 298 K, along with sensitivity 83.2 mV mM −1cm −2, recovery time 10 s, response time 50 s, and stability for 70 days. Further, the sensing mechanism was also explained based on redox surface interaction between Pb 2+ and NiO/SA-g-PPy-based electrodes in terms of induced structural changes and generated potential.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Analytical Chemistry and Sensors · Conducting polymers and applications · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Heavy metal water pollution: A fresh look about hazards, novel and conventional remediation methods10.1016/j.eti.2021.101504 ↗
2. Overview assessment of risk evaluation and treatment technologies for heavy metal pollution of water and soil10.1016/j.jclepro.2022.134043 ↗
3. Chromium removal from contaminated wastewaters using biodegradable membranes containing cellulose nanostructures10.1016/j.cej.2020.125055 ↗
4. Cr(VI) removal by chitosan-magnetite nano-composite in aqueous solution
5. Fe7Se8@Fe2O3 heterostructure nanosheets as bifunctional electrocatalyst for urea electrolysis10.1016/j.ijhydene.2022.08.099 ↗
6. Preparation and characterization of Azadirachta indica A. Juss. plant based natural coagulant for the application of urban sewage treatment: Modelling and cost assessment10.1016/j.eti.2021.101733 ↗
7. Reverse osmosis concentrate: An essential link for closing loop of municipal wastewater reclamation towards urban sustainability10.1016/j.cej.2020.127773 ↗
8. Potentiometric extractive sensing of lead ions over a nickel oxide intercalated chitosan-grafted-polyaniline composite10.1039/D0DT02687E ↗
9. Development of a Highly Sensitive Electrochemical Sensing Platform for the Trace Level Detection of Lead Ions10.1149/2.0271909jes ↗
10. Nanoconducting polymer: an effective adsorbent for dyes10.1007/s11696-021-01665-0 ↗
11. A rapid spectrophotometric method for trace determination of zinc10.1007/s12161-009-9083-2 ↗
12. One pot synthesis of mesoporous ZnO–SiO2 nanocomposite as high performance humidity sensor10.1016/j.colsurfa.2015.07.046 ↗
13. Ring-like PdO-decorated NiO with lamellar structures and their application in gas sensor10.1016/j.snb.2012.06.063 ↗
14. In-situ fabrication of surfactant modified CNT-based novel bio-composite and its performance evaluation for simultaneous removal of anionic dyes: Optimization by Box-Behnken design10.1016/j.seppur.2021.120262 ↗
15. Superior architecture and electrochemical performance of MnO2 doped PANI/CNT graphene fastened composite10.1007/s10934-019-00728-8 ↗
16. Silver doped manganese oxide-carbon nanotube nanocomposite for enhanced dye-sequestration: Isotherm studies and RSM modelling approach10.1016/j.ceramint.2020.01.025 ↗
17. Multifunctional CNT supported metal doped MnO2 composite for adsorptive removal of anionic dye and thiourea sensing10.1016/j.matchemphys.2018.09.001 ↗
18. Studies on nanocomposites of polyaniline using different substrates
19. Pseudo Capacitive Studies of Polyaniline-Carbon Nanotube Composites as Electrode Material for Supercapacitor10.1080/00032719.2012.680057 ↗
20. Improved microwave shielding properties of polyaniline grown over three-dimensional hybrid carbon assemblage substrate10.1007/s13204-014-0362-x ↗
21. Fabrication of tragacanthin gum-carboxymethyl chitosan bio-nanocomposite wound dressing with silver-titanium nanoparticles using freeze-drying method10.1016/j.matchemphys.2022.125770 ↗
22. Fabrication of chitosan-gelatin films incorporated with thymol-loaded alginate microparticles for controlled drug delivery, antibacterial activity and wound healing: In-vitro and in-vivo studies10.1016/j.ijbiomac.2022.10.249 ↗
23. Fabrication and finite element simulation of antibacterial 3D printed Poly L-lactic acid scaffolds coated with alginate/magnesium oxide for bone tissue regeneration10.1016/j.ijbiomac.2022.10.200 ↗
24. In-depth knowledge of the low-temperature hydrothermal synthesis of nanocrystalline hydroxyapatite from waste green mussel shell (Perna Viridis)
25. Review—Nanostructured Materials-Based Nanosensors10.1149/1945-7111/ab67aa ↗
26. Electrical conductivity and thermal stability studies on polyaniline Sn(IV)tungstomolybdate nanocomposite cation-exchange material: Application as Pb(II) ion-selective membrane electrode10.1016/S1452-3981(23)04876-9 ↗
27. Single-Piece Solid-Contact Pb2+-Selective Electrodes Based on Thiophene Oligomer10.1002/elan.201200195 ↗
28. Electrochemical Sensing of Paracetamol Using Iron Oxide Encapsulated in Chitosan-Grafted-Polyaniline10.1021/acsapm.0c00239 ↗
29. Enhanced amperometric detection of paracetamol by immobilized cobalt ion on functionalized MWCNTs - Chitosan thin film10.1016/j.ab.2018.05.004 ↗
30. Synthesis and characterization of gold–chitosan nanocomposite and application of resultant nanocomposite in sensors10.1016/j.colsurfb.2011.12.028 ↗
31. Construction and evaluation of a carbon paste electrode modified with polyaniline-co-poly(dithiodianiline) for enhanced stripping voltammetric determination of metal ions
32. Nanomolar determination of Pb (II) ions by selective templated electrode10.2298/JSC110830210M ↗
33. Electrochemical sensing of lead(II) by differential pulse voltammetry using conductive polypyrrole nanoparticles10.1007/s00604-019-4027-z ↗
34. Research progress on chemical modification of alginate: A review10.1016/j.carbpol.2010.11.048 ↗
35. Riboflavin Functionalized Dextrin-Sodium Alginate Based Fluorescent Sensor: Detoxification of Cu2+and Ni2+ Ions10.1021/acsapm.9b00724 ↗
36. Carbon dots—Sodium alginate hydrogel: A novel tetracycline fluorescent sensor and adsorber10.1016/j.jece.2019.103419 ↗
37. Photoelectrochemical sensor for detection Hg2+ based on in situ generated MOFs-like structures10.1016/j.aca.2022.340496 ↗
38. Organic Polymer and Metal Nano-particle Based Composites for Improvement of the Analytical Performance of Electrochemical Biosensors10.2174/1568026620666200309092957 ↗
39. Polymer-Metal Composite Healthcare Materials: From Nano to Device Scale10.3390/jcs6080218 ↗
40. R.P. Rastogi, N.B. Singh, S.K. Shukla, Synthesis of NiO nano crystals through nitrate eutectic melt, Indian J. Eng. Mater. Sci. 17(6) 17 (2010) 477–480. http://nopr.niscair.res.in/handle/123456789/10874.
41. a Buffer Solution for Colorimetric Comparison10.1016/S0021-9258(18)86000-8 ↗
42. Fabrication of a tunable glucose biosensor based on zinc oxide/chitosan-graft-poly(vinyl alcohol) core-shell nanocomposite10.1016/j.talanta.2012.05.052 ↗
43. Integrated approach for efficient humidity sensing over zinc oxide and polypyrole composite10.1016/j.msec.2018.04.054 ↗
44. Preparation and Characterization of pH and Temperature Responsive Semi interpenetrating Polymer Network Hydrogels Based on Linear Sodium Alginate and Crosslinked Poly(N-isopropylacrylamide)
45. Fourier transform infrared spectroscopy studies of polypyrrole composite coatings10.1016/S0927-0248(00)00061-1 ↗
46. Synthesis and characterization of polypyrrole grafted cellulose for humidity sensing10.1016/j.ijbiomac.2013.10.014 ↗
47. Effective Heavy Metals Removal from Water Using Nanomaterials10.3390/pr8060645 ↗
48. Synthesis and Characterization of Polypyrrole (PPy) Thin Films10.4236/snl.2011.11002 ↗
49. Selective Fabrication of an Electrochemical Sensor for Pb2+ Based on Poly(pyrrole-co-o–toluidine)/CoFe2O4 Nanocomposites10.1002/slct.201902714 ↗
50. Potentiometric detection of copper ion using chitin grafted polyaniline electrode10.1016/j.ijbiomac.2019.12.209 ↗
51. Multi-functional chitosan-based smart hydrogels mediated biomedical application10.1080/17425247.2019.1580691 ↗
52. Polyaniline Nanofiber Electrodes for Reversible Capture and Release of Mercury(II) from Water10.1021/jacs.8b09119 ↗
53. Electrochemical redox induced rapid uptake/release of Pb(II) ions with high selectivity using a novel porous electroactive HZSM-5@PANI/PSS composite film10.1016/j.electacta.2018.06.025 ↗