journal article·2022-12

Experimental optimization of electrical discharge coatings using conventional electrode

JagadeeswaraRao Maddu, Buschaiah Karrolla, Riyaaz Uddien Shaik

Publisher page

Abstract

In the last few years, researchers around the world are working to develop procedures that will allow coating a conductive material on another conductive base material using Electrical Discharge Machine (EDM). This process helps to extend the usage of EDM for the purpose of hard coatings. In this study, 24 experiments were conducted to coat copper on titanium alloy substrate by varying the coating input process parameters and surface treatments and output responses such as material deposition rate (MDR) and electrode wear rate (EWR) were calculated. Wherever it is necessary, L 9 orthogonal array design of experiments was implemented and all the coatings were taken for characterization with scanning electron microscope (SEM). With this characterization, surface morphology, coating thickness, coating-base material interface and surface crack density were studied to select one optimum coating for each case. Selected three coatings were considered for further characterization viz., phase analysis with X-ray diffraction (XRD) and surface topography with Atomic Force Microscopy (AFM). Phase obtained were Cu and TiZn 16 which were further heat treated to stabilize. Line and area profiles from surface roughness analysis was obtained and parameters such as min and max, peak and valley, Ra, Rq, Rz were evaluated.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. State of the art electrical discharge machining (EDM)10.1016/S0890-6955(03)00162-7 ↗
2. A.A. Bruzzone, “of EDM,” vol. 48, pp. 123–126, 1999.10.1016/S0007-8506(07)63146-1 ↗
3. A. Banu, M.Y. Ali, Electrical Discharge Machining (EDM): A Review Electrical Discharge Machining (EDM): A Review, no. November, pp. 2–10, 2016, doi: https://doi.org/10.26776/ijemm.01.01.2016.02.10.26776/ijemm.01.01.2016.02 ↗
4. Selective surface modification of SS304 using hybrid powder-mixed EDC process
5. Surface modification during electrical discharge machining proce–s - A review
6. R. Dileep, K. Mishra, S. Datta, and M. Masanta, “Effects of Tool Electrode on EDM Performance of Ti-6Al-4V,” pp. 2263–2277, 2018.10.1007/s12633-018-9760-0 ↗
7. V. S. Nimbalkar M T Shete, “Electric Discharge Machining (EDM) of Titanium Alloys: A Review.” [Online].
8. Titanium perovskite (CaTiO3) formation in Ti6Al4V alloy using the electrical discharge machining process for biomedical applications10.1016/j.surfcoat.2016.10.028 ↗
9. Materials used for sinking EDM electrodes: a review10.1007/s40430-018-1520-y ↗
10. Enhancing osseointegration of titanium implants through large-grit sandblasting combined with micro-arc oxidation surface modification10.1007/s10856-019-6276-0 ↗
11. A Framework for Surface Modification by Electrical Discharge Coating using Variable Density Electrodes10.1051/e3sconf/202130901093 ↗
12. Wear performance of TiC/Fe cermet electrical discharge coatings10.1016/j.wear.2018.02.007 ↗
13. Improved bioactivity of selective laser melting titanium: Surface modification with micro-/nano-textured hierarchical topography and bone regeneration performance evaluation10.1016/j.msec.2016.05.096 ↗
14. Microstructure and wear resistance of a Ni-WC composite coating on titanium grade 2 obtained by electroplating and electron beam remelting
15. Modification of titanium alloys surface properties by plasma electrolytic oxidation (PEO) and influence on biological response10.1007/s10856-017-5972-x ↗
16. Laser-assisted surface modification of Ti-implant in air and water environment10.1016/j.apsusc.2017.09.185 ↗
17. Electrochemical surface engineering of titanium-based alloys for biomedical application10.1016/j.electacta.2018.03.180 ↗
18. M. S. Libório et al., Surface modification of M2 steel by combination of cathodic cage plasma deposition and magnetron sputtered MoS2-TiN multilayer coatings, Surf. Coat. Technol., vol. 384, no. December 2019, p. 125327, 2020, doi: https://doi.org/10.1016/j.surfcoat.2019.125327.10.1016/j.surfcoat.2019.125327 ↗
19. Surface modification of Ti-6Al-4V alloy by electrical discharge coating process using partially sintered Ti-Nb electrode
20. Achievements in mid and high-temperature selective absorber coatings by physical vapor deposition (PVD) for solar thermal Application-A review10.1016/j.jallcom.2020.155510 ↗
21. Surface modification methods for titanium and its alloys and their corrosion behavior in biological environment: a review10.1007/s40735-019-0229-5 ↗
22. E. Maawad, H.G. Brokmeier, L. Wagner, Texture gradients in shot peened Ti-2.5Cu Solid State Phenom. 160 141–6, 2010.10.4028/www.scientific.net/SSP.160.141 ↗
23. Parametric study of electric discharge coating using powder metallurgical green compact electrodes10.1080/10426914.2014.930887 ↗
24. Powder mixed-EDM for potential biomedical applications: A critical review
25. Dry-sliding wear and hardness of thick electrical discharge coatings and laser clads10.1016/j.triboint.2020.106392 ↗
26. J. Maddu, S. Vuppala, and R. Uddien Shaik, “Formation and Statistical Optimization of Electrical Discharge 2 Coatings using Conventional Electrodes,” vol. 14, doi: 10.3390/xxxxx.10.3390/en14185691 ↗
27. Surface Characterization and Corrosion Resistance of Boron Nitride Coated Titanium Dental Implants
28. Surface modification of tungsten carbide by electrical discharge coating (EDC) using a titanium powder suspension10.1016/j.apsusc.2012.03.054 ↗
29. Surface modification process by electrical discharge machining with a Ti powder green compact electrode10.1016/S0924-0136(02)00597-6 ↗
30. Powder mixed electrical discharge machining for antibacterial coating on titanium implant surfaces10.1016/j.jmapro.2019.05.032 ↗
31. Investigation on the Influence of Edm Parameters on Machining Characteristics for Aisi 304
32. M. Science, A. Das, Experimental investigation on surface modification of aluminum by electric discharge coating process using TiC / Cu green compact tool-electrode, no. December 2012, 2019, doi: https://doi.org/10.1080/10910344.2012.731951.10.1080/10910344.2012.731951 ↗
33. S. Naidoo, A.O. Olaniran, Treated wastewater effluent as a source of microbial pollution of surface water resources, Int. J. Environ. Res. Public Health, vol. 11, no. 1. MDPI AG, pp. 249–270, Dec. 23, 2013. doi: https://doi.org/10.3390/ijerph110100249.10.3390/ijerph110100249 ↗
34. J. Maddu, R. Uddien Shaik, A Review on Electrical Discharge Coating (EDC) and its Multi-Optimization Techniques, doi: https://doi.org/10.1088/1757-899X/1185/1/012027.10.1088/1757-899X/1185/1/012027 ↗
35. Formation and optimization of electrical discharge coatings using conventional electrodes10.3390/en14185691 ↗
36. Surface integrity of tribo-adaptive layer prepared on Ti6Al4V through μEDC process10.1016/j.surfcoat.2021.127922 ↗
37. J.M. Rao, R. Uddien Shaik, ScienceDirect Electrical Discharge Machining: A Comparative Surface Integrity Study for Incoloy-800, 2020. [Online].
38. U. Ashok Kumar, P. Laxminarayana, Optimization of Electrode Tool Wear in micro holes machining by Die Sinker EDM using Taguchi Approach∗, in: Materials Today: Proceedings, 2018, vol. 5, no. 1, pp. 1824–1831. doi: https://doi.org/10.1016/j.matpr.2017.11.281.10.1016/j.matpr.2017.11.281 ↗
39. T.A. Fofonoff, S. Member, S.M. Martel, N.G. Hatsopoulos, J.P. Donoghue, I.W. Hunter, Microelectrode Array Fabrication by Electrical Discharge Machining and Chemical Etching, vol. 51, no. 6, pp. 890–895, 2004.10.1109/TBME.2004.826679 ↗
40. Riyaaz Uddien Shaik, Malobika Karanjai, Joydip Joardar, Neha Y. Hebalkar, Pramod H. Borse, Thermally stable electro catalytic nickel-phosphide film deposition on graphite for HER electrode application, Materials Science and Engineering: B, Volume 285, 2022, 115927, ISSN 0921-5107, https://doi.org/10.1016/j.mseb.2022.115927.10.1016/j.mseb.2022.115927 ↗
41. Preparation, properties, and crystal structures of Ti3Zn22 and TiZn1610.1006/jssc.1995.1337 ↗