Ce enhanced humidity-independent acetone-sensing properties of Co3O4 at a low operating temperature
Source abstract
Abstract
As a p-type MOS, Co 3O 4 can detect acetone at low working temperatures. However, humidity significantly impacts the gas-sensing properties of MOS, particularly when the sensors are operated at a low temperature. Due to the incorporation of Ce, the operating temperatures of the Co 3O 4-based sensors were reduced from 160℃ to 100℃, while the humidity independences were enhanced. In a high relative humidity environment of 80 %, the gas response of the pure Co 3O 4 sample deteriorated significantly at 160℃. In contrast, the response of the 10 at% Ce-Co 3O 4 sample were remained, even at the lower operating temperature. In addition, the 10 at% Ce-Co 3O 4 sample showed a high and a selective response to 50 ppm acetone in the relative humidity environment of 80 %, and the detection limit for acetone reached 0.1 ppm. The influence of the interaction between the sensing material with water molecules on the humidity-independent gas-sensing property of Ce-Co 3O 4 was also explored.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Measuring airway exchange of endogenous acetone using a single-exhalation breathing maneuver10.1152/japplphysiol.00868.2005 ↗
2. Development, challenges, and future of the breath sensor
3. Humidity compensation based on power-law response for MOS sensors to VOCs10.1016/j.snb.2021.129601 ↗
4. Field study of metal oxide semiconductor gas sensors in temperature cycled operation for selective VOC monitoring in indoor Air10.3390/atmos12050647 ↗
5. Ordered mesoporous tin oxide semiconductors with large pores and crystallized walls for high-performance gas sensing10.1021/acsami.7b18830 ↗
6. Controllable synthesis of Co3O4 crossed nanosheet arrays toward an acetone gas sensor10.1016/j.snb.2016.07.154 ↗
7. Gas sensors based on ultrathin porous Co3O4 nanosheets to detect acetone at low temperature10.1039/C5RA08536E ↗
8. Enhanced acetone sensing properties of Co3O4 nanosheets with highly exposed (111) planes
9. In-situ growth of Co3O4 nanoparticles based on electrospray for an acetone gas sensor10.1016/j.jallcom.2020.157234 ↗
10. Effect of Pr/Zn on the anti-humidity and acetone-sensing properties of Co3O4 prepared by electrospray10.1039/D2RA03321F ↗
11. An efficient vapor-phase processing method derived mesoporous N-C@SnO2-Co3O4 hollow nanoboxes with abundant surface oxygen vacancy for highly improved gas sensing application10.1016/j.jallcom.2020.158341 ↗
12. MXene/Co3O4 composite based formaldehyde sensor driven by ZnO/MXene nanowire arrays piezoelectric nanogenerator10.1016/j.snb.2021.129923 ↗
13. A New strategy for humidity independent oxide chemiresistors: dynamic self-refreshing of In2O3 sensing surface assisted by layer-by-layer coated CeO2 nanoclusters10.1002/smll.201601507 ↗
14. Humidity-independent oxide semiconductor chemiresistors using terbium-doped SnO2 yolk-shell spheres for real-time breath analysis10.1021/acsami.8b04245 ↗
15. Humidity-independent gas sensors using Pr-doped In2O3 macro-porous spheres: role of cyclic Pr3+/Pr4+ redox reactions in suppression of water poisoning effect10.1021/acsami.9b06386 ↗
16. Interactions of tin oxide surface with O2, H2O and H210.1016/0039-6028(79)90411-4 ↗
17. High acetone sensing properties of In2O3-NiO one-dimensional heterogeneous nanofibers based on electrospinning10.1039/D1RA00114K ↗
18. Confining free radicals in close vicinity to contaminants enables ultrafast fenton-like processes in the interspacing of MoS2 membranes10.1002/anie.201903531 ↗
19. Phase-separated Ce-Co-O catalysts for CO oxidation10.1016/j.ijhydene.2020.02.210 ↗
20. Effect of composition and temperature on conductive and sensing properties of CeO2+In2O3 nanocomposite films10.1016/j.snb.2014.12.022 ↗
21. Flexible room-temperature NH3 sensor for ultrasensitive, selective and humidity-independent gas detection10.1021/acsami.8b09169 ↗
22. Microwave-assisted synthesis of hierarchically porous Co3O4/rGO nanocomposite for low-temperature acetone detection10.1016/j.jcis.2021.03.041 ↗
23. P-type Co3O4 nanomaterials-based gas sensor: Preparation and acetone sensing performance10.1016/j.snb.2016.11.067 ↗
24. Facile construction of Co3O4 porous microspheres with enhanced acetone gas sensing performances10.1016/j.mssp.2019.05.014 ↗
25. Synthesis of nearly monodisperse Co3O4 nanocubes via a microwave-assisted solvothermal process and their gas sensing properties10.1016/j.snb.2011.05.039 ↗
26. Preparation and Enhanced Acetone-Sensing Properties of ZIF-8-Derived Co3O4@ZnO Microspheres10.3390/chemosensors11070376 ↗
27. MOF-Derived Co3O4/Fe2O3 PN Hollow Cubes for Improved Acetone Sensing Characteristics10.1016/j.physe.2019.113869 ↗
28. Nanoscale PdO Catalyst Functionalized Co3O4 Hollow Nanocages Using MOF Templates for Selective Detection of Acetone Molecules in Exhaled Breath10.1021/acsami.7b01284 ↗
29. Advances and new directions in gas-sensing devices10.1016/j.actamat.2012.10.041 ↗
30. A highly sensitive VOC gas sensor using p-type mesoporous Co3O4 nanosheets prepared by a facile chemical coprecipitation method10.1016/j.snb.2016.04.138 ↗
31. Oxide semiconductor gas sensors10.1023/A:1023436725457 ↗
32. Relation between the amounts of chemisorbed and physisorbed water on metal oxides10.1021/j100721a039 ↗
33. CeO2/BiOIO3 heterojunction with oxygen vacancies and Ce4+/Ce3+ redox centers synergistically enhanced photocatalytic removal heavy metal10.1016/j.apsusc.2020.147116 ↗